[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20241004-realtek-bindings-fixup-v2-1-667afa08d184@linaro.org>
Date: Fri, 04 Oct 2024 10:08:50 +0200
From: Linus Walleij <linus.walleij@...aro.org>
To: Alvin Šipraga <alsi@...g-olufsen.dk>,
Andrew Lunn <andrew@...n.ch>, Florian Fainelli <f.fainelli@...il.com>,
Vladimir Oltean <olteanv@...il.com>,
"David S. Miller" <davem@...emloft.net>, Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>
Cc: netdev@...r.kernel.org, devicetree@...r.kernel.org,
Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>,
Linus Walleij <linus.walleij@...aro.org>
Subject: [PATCH net-next v2] dt-bindings: net: realtek: Use proper node
names
We eventually want to get to a place where we fix all DTS files
so that we can simply disallow switch/port/ports without the
ethernet-* prefix so the DTS files are more readable.
Replace:
- switch with ethernet-switch
- ports with ethernet-ports
- port with ethernet-port
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
Signed-off-by: Linus Walleij <linus.walleij@...aro.org>
---
Changes in v2:
- Rebased on v6.12-rc1
- Updated committ message.
- Link to v1: https://lore.kernel.org/r/20240208-realtek-bindings-fixup-v1-1-b1cf7f7e9eed@linaro.org
---
.../devicetree/bindings/net/dsa/realtek.yaml | 46 +++++++++++-----------
1 file changed, 23 insertions(+), 23 deletions(-)
diff --git a/Documentation/devicetree/bindings/net/dsa/realtek.yaml b/Documentation/devicetree/bindings/net/dsa/realtek.yaml
index 70b6bda3cf98..f348e66fb515 100644
--- a/Documentation/devicetree/bindings/net/dsa/realtek.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/realtek.yaml
@@ -147,7 +147,7 @@ examples:
#include <dt-bindings/interrupt-controller/irq.h>
platform {
- switch {
+ ethernet-switch {
compatible = "realtek,rtl8366rb";
/* 22 = MDIO (has input reads), 21 = MDC (clock, output only) */
mdc-gpios = <&gpio0 21 GPIO_ACTIVE_HIGH>;
@@ -163,35 +163,35 @@ examples:
#interrupt-cells = <1>;
};
- ports {
+ ethernet-ports {
#address-cells = <1>;
#size-cells = <0>;
- port@0 {
+ ethernet-port@0 {
reg = <0>;
label = "lan0";
phy-handle = <&phy0>;
};
- port@1 {
+ ethernet-port@1 {
reg = <1>;
label = "lan1";
phy-handle = <&phy1>;
};
- port@2 {
+ ethernet-port@2 {
reg = <2>;
label = "lan2";
phy-handle = <&phy2>;
};
- port@3 {
+ ethernet-port@3 {
reg = <3>;
label = "lan3";
phy-handle = <&phy3>;
};
- port@4 {
+ ethernet-port@4 {
reg = <4>;
label = "wan";
phy-handle = <&phy4>;
};
- port@5 {
+ ethernet-port@5 {
reg = <5>;
ethernet = <&gmac0>;
phy-mode = "rgmii";
@@ -241,7 +241,7 @@ examples:
#include <dt-bindings/interrupt-controller/irq.h>
platform {
- switch {
+ ethernet-switch {
compatible = "realtek,rtl8365mb";
mdc-gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>;
mdio-gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
@@ -255,30 +255,30 @@ examples:
#interrupt-cells = <1>;
};
- ports {
+ ethernet-ports {
#address-cells = <1>;
#size-cells = <0>;
- port@0 {
+ ethernet-port@0 {
reg = <0>;
label = "swp0";
phy-handle = <ðphy0>;
};
- port@1 {
+ ethernet-port@1 {
reg = <1>;
label = "swp1";
phy-handle = <ðphy1>;
};
- port@2 {
+ ethernet-port@2 {
reg = <2>;
label = "swp2";
phy-handle = <ðphy2>;
};
- port@3 {
+ ethernet-port@3 {
reg = <3>;
label = "swp3";
phy-handle = <ðphy3>;
};
- port@6 {
+ ethernet-port@6 {
reg = <6>;
ethernet = <&fec1>;
phy-mode = "rgmii";
@@ -330,7 +330,7 @@ examples:
#address-cells = <1>;
#size-cells = <0>;
- switch@29 {
+ ethernet-switch@29 {
compatible = "realtek,rtl8365mb";
reg = <29>;
@@ -344,36 +344,36 @@ examples:
#interrupt-cells = <1>;
};
- ports {
+ ethernet-ports {
#address-cells = <1>;
#size-cells = <0>;
- port@0 {
+ ethernet-port@0 {
reg = <0>;
label = "lan4";
};
- port@1 {
+ ethernet-port@1 {
reg = <1>;
label = "lan3";
};
- port@2 {
+ ethernet-port@2 {
reg = <2>;
label = "lan2";
};
- port@3 {
+ ethernet-port@3 {
reg = <3>;
label = "lan1";
};
- port@4 {
+ ethernet-port@4 {
reg = <4>;
label = "wan";
};
- port@7 {
+ ethernet-port@7 {
reg = <7>;
ethernet = <ðernet>;
phy-mode = "rgmii";
---
base-commit: 9852d85ec9d492ebef56dc5f229416c925758edc
change-id: 20240208-realtek-bindings-fixup-1d8ebaf19dba
Best regards,
--
Linus Walleij <linus.walleij@...aro.org>
Powered by blists - more mailing lists