| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20241007113312.38728-3-wahrenst@gmx.net>
Date: Mon, 7 Oct 2024 13:33:12 +0200
From: Stefan Wahren <wahrenst@....net>
To: "David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>
Cc: netdev@...r.kernel.org,
linux-kernel@...r.kernel.org,
Michael Heimpold <mhei@...mpold.de>,
Christoph Fritz <chf.fritz@...glemail.com>,
Stefan Wahren <wahrenst@....net>
Subject: [PATCH 2/2 net-next] qca_spi: Improve reset mechanism
The commit 92717c2356cb ("net: qca_spi: Avoid high load if QCA7000 is not
available") fixed the high load in case the QCA7000 is not available
but introduced sync delays for some corner cases like buffer errors.
So add the reset requests to the atomics flags, which are polled by
the SPI thread. As a result reset requests and sync state are now
separated. This has the nice benefit to make the code easier to
understand.
Signed-off-by: Stefan Wahren <wahrenst@....net>
---
drivers/net/ethernet/qualcomm/qca_debug.c | 4 ++--
drivers/net/ethernet/qualcomm/qca_spi.c | 29 +++++++++++++----------
drivers/net/ethernet/qualcomm/qca_spi.h | 2 +-
3 files changed, 20 insertions(+), 15 deletions(-)
diff --git a/drivers/net/ethernet/qualcomm/qca_debug.c b/drivers/net/ethernet/qualcomm/qca_debug.c
index ad06da0fdaa0..13deb3da4a64 100644
--- a/drivers/net/ethernet/qualcomm/qca_debug.c
+++ b/drivers/net/ethernet/qualcomm/qca_debug.c
@@ -98,8 +98,8 @@ qcaspi_info_show(struct seq_file *s, void *what)
seq_printf(s, "IRQ : %d\n",
qca->spi_dev->irq);
- seq_printf(s, "INTR : %lx\n",
- qca->intr);
+ seq_printf(s, "FLAGS : %lx\n",
+ qca->flags);
seq_printf(s, "SPI max speed : %lu\n",
(unsigned long)qca->spi_dev->max_speed_hz);
diff --git a/drivers/net/ethernet/qualcomm/qca_spi.c b/drivers/net/ethernet/qualcomm/qca_spi.c
index fde7197372fe..b8fa6c56104e 100644
--- a/drivers/net/ethernet/qualcomm/qca_spi.c
+++ b/drivers/net/ethernet/qualcomm/qca_spi.c
@@ -35,7 +35,8 @@
#define MAX_DMA_BURST_LEN 5000
-#define SPI_INTR 0
+#define SPI_INTR 0
+#define SPI_RESET 1
/* Modules parameters */
#define QCASPI_CLK_SPEED_MIN 1000000
@@ -495,7 +496,7 @@ qcaspi_qca7k_sync(struct qcaspi *qca, int event)
if (qca->sync == QCASPI_SYNC_READY)
qca->stats.bad_signature++;
- qca->sync = QCASPI_SYNC_UNKNOWN;
+ set_bit(SPI_RESET, &qca->flags);
netdev_dbg(qca->net_dev, "sync: got CPU on, but signature was invalid, restart\n");
return;
} else {
@@ -512,6 +513,10 @@ qcaspi_qca7k_sync(struct qcaspi *qca, int event)
return;
}
}
+ } else {
+ /* Handle reset only on QCASPI_EVENT_UPDATE */
+ if (test_and_clear_bit(SPI_RESET, &qca->flags))
+ qca->sync = QCASPI_SYNC_UNKNOWN;
}
switch (qca->sync) {
@@ -522,7 +527,7 @@ qcaspi_qca7k_sync(struct qcaspi *qca, int event)
qcaspi_read_register(qca, SPI_REG_SIGNATURE, &signature);
if (signature != QCASPI_GOOD_SIGNATURE) {
- qca->sync = QCASPI_SYNC_UNKNOWN;
+ set_bit(SPI_RESET, &qca->flags);
qca->stats.bad_signature++;
netdev_dbg(qca->net_dev, "sync: bad signature, restart\n");
/* don't reset right away */
@@ -553,7 +558,7 @@ qcaspi_qca7k_sync(struct qcaspi *qca, int event)
qca->reset_count);
if (qca->reset_count >= QCASPI_RESET_TIMEOUT) {
/* reset did not seem to take place, try again */
- qca->sync = QCASPI_SYNC_UNKNOWN;
+ set_bit(SPI_RESET, &qca->flags);
qca->stats.reset_timeout++;
netdev_dbg(qca->net_dev, "sync: reset timeout, restarting process.\n");
}
@@ -582,14 +587,14 @@ qcaspi_spi_thread(void *data)
continue;
}
- if (!test_bit(SPI_INTR, &qca->intr) &&
+ if (!qca->flags &&
!qca->txr.skb[qca->txr.head])
schedule();
set_current_state(TASK_RUNNING);
netdev_dbg(qca->net_dev, "have work to do. int: %lu, tx_skb: %p\n",
- qca->intr,
+ qca->flags,
qca->txr.skb[qca->txr.head]);
qcaspi_qca7k_sync(qca, QCASPI_EVENT_UPDATE);
@@ -603,7 +608,7 @@ qcaspi_spi_thread(void *data)
msleep(QCASPI_QCA7K_REBOOT_TIME_MS);
}
- if (test_and_clear_bit(SPI_INTR, &qca->intr)) {
+ if (test_and_clear_bit(SPI_INTR, &qca->flags)) {
start_spi_intr_handling(qca, &intr_cause);
if (intr_cause & SPI_INT_CPU_ON) {
@@ -628,7 +633,7 @@ qcaspi_spi_thread(void *data)
/* restart sync */
netdev_dbg(qca->net_dev, "===> rdbuf error!\n");
qca->stats.read_buf_err++;
- qca->sync = QCASPI_SYNC_UNKNOWN;
+ set_bit(SPI_RESET, &qca->flags);
continue;
}
@@ -636,7 +641,7 @@ qcaspi_spi_thread(void *data)
/* restart sync */
netdev_dbg(qca->net_dev, "===> wrbuf error!\n");
qca->stats.write_buf_err++;
- qca->sync = QCASPI_SYNC_UNKNOWN;
+ set_bit(SPI_RESET, &qca->flags);
continue;
}
@@ -665,7 +670,7 @@ qcaspi_intr_handler(int irq, void *data)
{
struct qcaspi *qca = data;
- set_bit(SPI_INTR, &qca->intr);
+ set_bit(SPI_INTR, &qca->flags);
if (qca->spi_thread)
wake_up_process(qca->spi_thread);
@@ -681,7 +686,7 @@ qcaspi_netdev_open(struct net_device *dev)
if (!qca)
return -EINVAL;
- set_bit(SPI_INTR, &qca->intr);
+ set_bit(SPI_INTR, &qca->flags);
qca->sync = QCASPI_SYNC_UNKNOWN;
qcafrm_fsm_init_spi(&qca->frm_handle);
@@ -800,7 +805,7 @@ qcaspi_netdev_tx_timeout(struct net_device *dev, unsigned int txqueue)
jiffies, jiffies - dev_trans_start(dev));
qca->net_dev->stats.tx_errors++;
/* Trigger tx queue flush and QCA7000 reset */
- qca->sync = QCASPI_SYNC_UNKNOWN;
+ set_bit(SPI_RESET, &qca->flags);
if (qca->spi_thread)
wake_up_process(qca->spi_thread);
diff --git a/drivers/net/ethernet/qualcomm/qca_spi.h b/drivers/net/ethernet/qualcomm/qca_spi.h
index 8f4808695e82..7ba5c9e2f61c 100644
--- a/drivers/net/ethernet/qualcomm/qca_spi.h
+++ b/drivers/net/ethernet/qualcomm/qca_spi.h
@@ -81,7 +81,7 @@ struct qcaspi {
struct qcafrm_handle frm_handle;
struct sk_buff *rx_skb;
- unsigned long intr;
+ unsigned long flags;
u16 reset_count;
#ifdef CONFIG_DEBUG_FS
--
2.34.1
Powered by blists - more mailing lists