netdev - [PATCH net-next 08/11] net: enetc: add i.MX95 EMDIO support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20241009095116.147412-9-wei.fang@nxp.com>
Date: Wed,  9 Oct 2024 17:51:13 +0800
From: Wei Fang <wei.fang@....com>
To: davem@...emloft.net,
	edumazet@...gle.com,
	kuba@...nel.org,
	pabeni@...hat.com,
	robh@...nel.org,
	krzk+dt@...nel.org,
	conor+dt@...nel.org,
	vladimir.oltean@....com,
	claudiu.manoil@....com,
	xiaoning.wang@....com,
	Frank.Li@....com,
	christophe.leroy@...roup.eu,
	linux@...linux.org.uk,
	bhelgaas@...gle.com
Cc: imx@...ts.linux.dev,
	netdev@...r.kernel.org,
	devicetree@...r.kernel.org,
	linux-kernel@...r.kernel.org,
	linux-pci@...r.kernel.org
Subject: [PATCH net-next 08/11] net: enetc: add i.MX95 EMDIO support

The verdor ID and device ID of i.MX95 EMDIO are different from LS1028A
EMDIO, so add new vendor ID and device ID to pci_device_id table to
support i.MX95 EMDIO. And the i.MX95 EMDIO has two pins that need to be
controlled, namely MDC and MDIO.

Signed-off-by: Wei Fang <wei.fang@....com>
---
 drivers/net/ethernet/freescale/enetc/enetc_pci_mdio.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/net/ethernet/freescale/enetc/enetc_pci_mdio.c b/drivers/net/ethernet/freescale/enetc/enetc_pci_mdio.c
index 2445e35a764a..9968a1e9b5ef 100644
--- a/drivers/net/ethernet/freescale/enetc/enetc_pci_mdio.c
+++ b/drivers/net/ethernet/freescale/enetc/enetc_pci_mdio.c
@@ -2,6 +2,7 @@
 /* Copyright 2019 NXP */
 #include <linux/fsl/enetc_mdio.h>
 #include <linux/of_mdio.h>
+#include <linux/pinctrl/consumer.h>
 #include "enetc_pf.h"
 
 #define ENETC_MDIO_DEV_ID	0xee01
@@ -71,6 +72,8 @@ static int enetc_pci_mdio_probe(struct pci_dev *pdev,
 		dev_info(&pdev->dev, "Enabled ERR050089 workaround\n");
 	}
 
+	pinctrl_pm_select_default_state(dev);
+
 	err = of_mdiobus_register(bus, dev->of_node);
 	if (err)
 		goto err_mdiobus_reg;
@@ -113,6 +116,7 @@ static void enetc_pci_mdio_remove(struct pci_dev *pdev)
 
 static const struct pci_device_id enetc_pci_mdio_id_table[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_FREESCALE, ENETC_MDIO_DEV_ID) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_NXP2, PCI_DEVICE_ID_NXP2_NETC_EMDIO) },
 	{ 0, } /* End of table. */
 };
 MODULE_DEVICE_TABLE(pci, enetc_pci_mdio_id_table);
-- 
2.34.1