netdev - Re: [PATCH net-next v3 2/7] bnxt_en: add support for tcp-data-split ethtool command

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <CAMArcTX97qsNTtgkaS5-jrV4bC_2ftS_0ZcS2vd_utYEceG7SA@mail.gmail.com>
Date: Thu, 10 Oct 2024 02:47:18 +0900
From: Taehee Yoo <ap420073@...il.com>
To: Jakub Kicinski <kuba@...nel.org>
Cc: davem@...emloft.net, pabeni@...hat.com, edumazet@...gle.com, 
	almasrymina@...gle.com, netdev@...r.kernel.org, linux-doc@...r.kernel.org, 
	donald.hunter@...il.com, corbet@....net, michael.chan@...adcom.com, 
	kory.maincent@...tlin.com, andrew@...n.ch, maxime.chevallier@...tlin.com, 
	danieller@...dia.com, hengqi@...ux.alibaba.com, ecree.xilinx@...il.com, 
	przemyslaw.kitszel@...el.com, hkallweit1@...il.com, ahmed.zaki@...el.com, 
	paul.greenwalt@...el.com, rrameshbabu@...dia.com, idosch@...dia.com, 
	asml.silence@...il.com, kaiyuanz@...gle.com, willemb@...gle.com, 
	aleksander.lobakin@...el.com, dw@...idwei.uk, sridhar.samudrala@...el.com, 
	bcreeley@....com
Subject: Re: [PATCH net-next v3 2/7] bnxt_en: add support for tcp-data-split
 ethtool command

On Thu, Oct 10, 2024 at 12:28 AM Jakub Kicinski <kuba@...nel.org> wrote:
>
> On Wed, 9 Oct 2024 22:54:17 +0900 Taehee Yoo wrote:
> > > This breaks previous behavior. The HDS reporting from get was
> > > introduced to signal to user space whether the page flip based
> > > TCP zero-copy (the one added some years ago not the recent one)
> > > will be usable with this NIC.
> > >
> > > When HW-GRO is enabled HDS will be working.
> > >
> > > I think that the driver should only track if the user has set the value
> > > to ENABLED (forced HDS), or to UKNOWN (driver default). Setting the HDS
> > > to disabled is not useful, don't support it.
> >
> > Okay, I will remove the disable feature in a v4 patch.
> > Before this patch, hds_threshold was rx-copybreak value.
> > How do you think hds_threshold should still follow rx-copybreak value
> > if it is UNKNOWN mode?
>
> IIUC the rx_copybreak only applies to the header? Or does it apply
> to the entire frame?
>
> If rx_copybreak applies to the entire frame and not just the first
> buffer (headers or headers+payload if not split) - no preference.
> If rx_copybreak only applies to the headers / first buffer then
> I'd keep them separate as they operate on a different length.

It applies only the first buffer.
So, if HDS is enabled, it copies only header.
Thanks, I will separate rx-copybreak and hds_threshold.

>
> > I think hds_threshold need to follow new tcp-data-split-thresh value in
> > ENABLE/UNKNOWN and make rx-copybreak pure software feature.
>
> Sounds good to me, but just to be clear:
>
> If user sets the HDS enable to UNKNOWN (or doesn't set it):
>  - GET returns (current behavior, AFAIU):
>    - DISABLED (if HW-GRO is disabled and MTU is not Jumbo)
>    - ENABLED (if HW-GRO is enabled of MTU is Jumbo)
> If user sets the HDS enable to ENABLED (force HDS on):
>  - GET returns ENABLED
>
> hds_threshold returns: some value, but it's only actually used if GET
> returns ENABLED.
>

Thanks for the detailed explanation!

> > But if so, it changes the default behavior.
>
> How so? The configuration of neither of those two is exposed to
> the user. We can keep the same defaults, until user overrides them.
>

Ah, right.
I understood.

> > How do you think about it?
> >
> > >
> > > >       ering->tx_max_pending = BNXT_MAX_TX_DESC_CNT;
> > > >
> > > >       ering->rx_pending = bp->rx_ring_size;
> > > > @@ -854,9 +858,25 @@ static int bnxt_set_ringparam(struct net_device *dev,
> > > >           (ering->tx_pending < BNXT_MIN_TX_DESC_CNT))
> > > >               return -EINVAL;
> > > >
> > > > +     if (kernel_ering->tcp_data_split != ETHTOOL_TCP_DATA_SPLIT_DISABLED &&
> > > > +         BNXT_RX_PAGE_MODE(bp)) {
> > > > +             NL_SET_ERR_MSG_MOD(extack, "tcp-data-split can not be enabled with XDP");
> > > > +             return -EINVAL;
> > > > +     }
> > >
> > > Technically just if the XDP does not support multi-buffer.
> > > Any chance we could do this check in the core?
> >
> > I think we can access xdp_rxq_info with netdev_rx_queue structure.
> > However, xdp_rxq_info is not sufficient to distinguish mb is supported
> > by the driver or not. I think prog->aux->xdp_has_frags is required to
> > distinguish it correctly.
> > So, I think we need something more.
> > Do you have any idea?
>
> Take a look at dev_xdp_prog_count(), something like that but only
> counting non-mb progs?

Thanks for very nice example, I will try it!