[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20241013-upstream_s32cc_gmac-v3-16-d84b5a67b930@oss.nxp.com>
Date: Sun, 13 Oct 2024 23:27:51 +0200
From: Jan Petrous via B4 Relay <devnull+jan.petrous.oss.nxp.com@...nel.org>
To: Maxime Coquelin <mcoquelin.stm32@...il.com>,
Alexandre Torgue <alexandre.torgue@...s.st.com>,
Jose Abreu <joabreu@...opsys.com>, "David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>, Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>, Vinod Koul <vkoul@...nel.org>,
Richard Cochran <richardcochran@...il.com>, Andrew Lunn <andrew@...n.ch>,
Heiner Kallweit <hkallweit1@...il.com>,
Russell King <linux@...linux.org.uk>, Shawn Guo <shawnguo@...nel.org>,
Sascha Hauer <s.hauer@...gutronix.de>,
Pengutronix Kernel Team <kernel@...gutronix.de>,
Fabio Estevam <festevam@...il.com>, Emil Renner Berthing <kernel@...il.dk>,
Minda Chen <minda.chen@...rfivetech.com>,
Nicolas Ferre <nicolas.ferre@...rochip.com>,
Claudiu Beznea <claudiu.beznea@...on.dev>,
Iyappan Subramanian <iyappan@...amperecomputing.com>,
Keyur Chudgar <keyur@...amperecomputing.com>,
Quan Nguyen <quan@...amperecomputing.com>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
Giuseppe Cavallaro <peppe.cavallaro@...com>
Cc: linux-stm32@...md-mailman.stormreply.com,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
netdev@...r.kernel.org, linux-arm-msm@...r.kernel.org, imx@...ts.linux.dev,
devicetree@...r.kernel.org, NXP S32 Linux Team <s32@....com>,
"Jan Petrous (OSS)" <jan.petrous@....nxp.com>,
Andrei Botila <andrei.botila@....org>,
Jacob Keller <jacob.e.keller@...el.com>
Subject: [PATCH v3 16/16] net: stmmac: dwmac-s32: Read PTP clock rate when
ready
From: "Jan Petrous (OSS)" <jan.petrous@....nxp.com>
The PTP clock is read by stmmac_platform during DT parse.
On S32G/R the clock is not ready and returns 0. Postpone
reading of the clock on PTP init.
Co-developed-by: Andrei Botila <andrei.botila@....org>
Signed-off-by: Andrei Botila <andrei.botila@....org>
Signed-off-by: Jan Petrous (OSS) <jan.petrous@....nxp.com>
Reviewed-by: Jacob Keller <jacob.e.keller@...el.com>
---
drivers/net/ethernet/stmicro/stmmac/dwmac-s32.c | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-s32.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-s32.c
index aedd6bf80684..3daf282d8da7 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-s32.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-s32.c
@@ -140,6 +140,18 @@ static void s32_fix_mac_speed(void *priv, unsigned int speed, unsigned int mode)
dev_err(gmac->dev, "Can't set tx clock\n");
}
+static void s32_dwmac_ptp_clk_freq_config(struct stmmac_priv *priv)
+{
+ struct plat_stmmacenet_data *plat = priv->plat;
+
+ if (!plat->clk_ptp_ref)
+ return;
+
+ plat->clk_ptp_rate = clk_get_rate(plat->clk_ptp_ref);
+
+ netdev_dbg(priv->dev, "PTP rate %lu\n", plat->clk_ptp_rate);
+}
+
static int s32_dwmac_probe(struct platform_device *pdev)
{
struct plat_stmmacenet_data *plat;
@@ -195,6 +207,7 @@ static int s32_dwmac_probe(struct platform_device *pdev)
plat->init = s32_gmac_init;
plat->exit = s32_gmac_exit;
plat->fix_mac_speed = s32_fix_mac_speed;
+ plat->ptp_clk_freq_config = s32_dwmac_ptp_clk_freq_config;
plat->bsp_priv = gmac;
--
2.46.0
Powered by blists - more mailing lists