[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAMZ6RqJfBbFRaynjFAbi5quAvcA1bYj7Dw_vJ7rDsLRaEheZrw@mail.gmail.com>
Date: Wed, 16 Oct 2024 23:32:06 +0900
From: Vincent MAILHOL <mailhol.vincent@...adoo.fr>
To: Markus Schneider-Pargmann <msp@...libre.com>
Cc: Chandrasekar Ramakrishnan <rcsekar@...sung.com>, Marc Kleine-Budde <mkl@...gutronix.de>,
"David S. Miller" <davem@...emloft.net>, Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>, Conor Dooley <conor+dt@...nel.org>, Nishanth Menon <nm@...com>,
Vignesh Raghavendra <vigneshr@...com>, Tero Kristo <kristo@...nel.org>, linux-can@...r.kernel.org,
netdev@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
Matthias Schiffer <matthias.schiffer@...tq-group.com>, Vishal Mahaveer <vishalm@...com>,
Kevin Hilman <khilman@...libre.com>, Dhruva Gole <d-gole@...com>, Simon Horman <horms@...nel.org>
Subject: Re: [PATCH v4 3/9] can: m_can: Map WoL to device_set_wakeup_enable
On Wed. 16 Oct. 2024 at 04:18, Markus Schneider-Pargmann
<msp@...libre.com> wrote:
> In some devices the pins of the m_can module can act as a wakeup source.
> This patch helps do that by connecting the PHY_WAKE WoL option to
> device_set_wakeup_enable. By marking this device as being wakeup
> enabled, this setting can be used by platform code to decide which
> sleep or poweroff mode to use.
>
> Also this prepares the driver for the next patch in which the pinctrl
> settings are changed depending on the desired wakeup source.
>
> Signed-off-by: Markus Schneider-Pargmann <msp@...libre.com>
I left a nitpick below. Regardless:
Reviewed-by: Vincent Mailhol <mailhol.vincent@...adoo.fr>
> ---
> drivers/net/can/m_can/m_can.c | 37 +++++++++++++++++++++++++++++++++++++
> 1 file changed, 37 insertions(+)
>
> diff --git a/drivers/net/can/m_can/m_can.c b/drivers/net/can/m_can/m_can.c
> index a978b960f1f1e1e8273216ff330ab789d0fd6d51..d427645a5b3baf7d0a648e3b008d7d7de7f23374 100644
> --- a/drivers/net/can/m_can/m_can.c
> +++ b/drivers/net/can/m_can/m_can.c
> @@ -2185,6 +2185,36 @@ static int m_can_set_coalesce(struct net_device *dev,
> return 0;
> }
>
> +static void m_can_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
> +{
> + struct m_can_classdev *cdev = netdev_priv(dev);
> +
> + wol->supported = device_can_wakeup(cdev->dev) ? WAKE_PHY : 0;
> + wol->wolopts = device_may_wakeup(cdev->dev) ? WAKE_PHY : 0;
> +}
> +
> +static int m_can_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
> +{
> + struct m_can_classdev *cdev = netdev_priv(dev);
> + bool wol_enable = !!(wol->wolopts & WAKE_PHY);
> + int ret;
> +
> + if ((wol->wolopts & WAKE_PHY) != wol->wolopts)
Here, you want to check if a bit other than WAKE_PHY is set, isn't it?
What about doing this:
if (wol->wolopts & ~WAKE_PHY)
instead?
> + return -EINVAL;
> +
> + if (wol_enable == device_may_wakeup(cdev->dev))
> + return 0;
> +
> + ret = device_set_wakeup_enable(cdev->dev, wol_enable);
> + if (ret) {
> + netdev_err(cdev->net, "Failed to set wakeup enable %pE\n",
> + ERR_PTR(ret));
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> static const struct ethtool_ops m_can_ethtool_ops_coalescing = {
> .supported_coalesce_params = ETHTOOL_COALESCE_RX_USECS_IRQ |
> ETHTOOL_COALESCE_RX_MAX_FRAMES_IRQ |
> @@ -2194,10 +2224,14 @@ static const struct ethtool_ops m_can_ethtool_ops_coalescing = {
> .get_ts_info = ethtool_op_get_ts_info,
> .get_coalesce = m_can_get_coalesce,
> .set_coalesce = m_can_set_coalesce,
> + .get_wol = m_can_get_wol,
> + .set_wol = m_can_set_wol,
> };
>
> static const struct ethtool_ops m_can_ethtool_ops = {
> .get_ts_info = ethtool_op_get_ts_info,
> + .get_wol = m_can_get_wol,
> + .set_wol = m_can_set_wol,
> };
>
> static int register_m_can_dev(struct m_can_classdev *cdev)
> @@ -2324,6 +2358,9 @@ struct m_can_classdev *m_can_class_allocate_dev(struct device *dev,
> goto out;
> }
>
> + if (dev->of_node && of_property_read_bool(dev->of_node, "wakeup-source"))
> + device_set_wakeup_capable(dev, true);
> +
> /* Get TX FIFO size
> * Defines the total amount of echo buffers for loopback
> */
>
> --
> 2.45.2
>
>
Powered by blists - more mailing lists