[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <zas3pyfuv2f2qouctwdi6poaznobytq53mjjusificzfloafsl@q3oursy6rxjn>
Date: Wed, 16 Oct 2024 20:57:23 +0200
From: Markus Schneider-Pargmann <msp@...libre.com>
To: Vincent MAILHOL <mailhol.vincent@...adoo.fr>
Cc: Chandrasekar Ramakrishnan <rcsekar@...sung.com>,
Marc Kleine-Budde <mkl@...gutronix.de>, "David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>, Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>, Conor Dooley <conor+dt@...nel.org>, Nishanth Menon <nm@...com>,
Vignesh Raghavendra <vigneshr@...com>, Tero Kristo <kristo@...nel.org>, linux-can@...r.kernel.org,
netdev@...r.kernel.org, devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, Matthias Schiffer <matthias.schiffer@...tq-group.com>,
Vishal Mahaveer <vishalm@...com>, Kevin Hilman <khilman@...libre.com>, Dhruva Gole <d-gole@...com>,
Simon Horman <horms@...nel.org>
Subject: Re: [PATCH v4 3/9] can: m_can: Map WoL to device_set_wakeup_enable
Hi Vincent,
On Wed, Oct 16, 2024 at 11:32:06PM GMT, Vincent MAILHOL wrote:
> On Wed. 16 Oct. 2024 at 04:18, Markus Schneider-Pargmann
> <msp@...libre.com> wrote:
> > In some devices the pins of the m_can module can act as a wakeup source.
> > This patch helps do that by connecting the PHY_WAKE WoL option to
> > device_set_wakeup_enable. By marking this device as being wakeup
> > enabled, this setting can be used by platform code to decide which
> > sleep or poweroff mode to use.
> >
> > Also this prepares the driver for the next patch in which the pinctrl
> > settings are changed depending on the desired wakeup source.
> >
> > Signed-off-by: Markus Schneider-Pargmann <msp@...libre.com>
>
> I left a nitpick below. Regardless:
>
> Reviewed-by: Vincent Mailhol <mailhol.vincent@...adoo.fr>
>
> > ---
> > drivers/net/can/m_can/m_can.c | 37 +++++++++++++++++++++++++++++++++++++
> > 1 file changed, 37 insertions(+)
> >
> > diff --git a/drivers/net/can/m_can/m_can.c b/drivers/net/can/m_can/m_can.c
> > index a978b960f1f1e1e8273216ff330ab789d0fd6d51..d427645a5b3baf7d0a648e3b008d7d7de7f23374 100644
> > --- a/drivers/net/can/m_can/m_can.c
> > +++ b/drivers/net/can/m_can/m_can.c
> > @@ -2185,6 +2185,36 @@ static int m_can_set_coalesce(struct net_device *dev,
> > return 0;
> > }
> >
> > +static void m_can_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
> > +{
> > + struct m_can_classdev *cdev = netdev_priv(dev);
> > +
> > + wol->supported = device_can_wakeup(cdev->dev) ? WAKE_PHY : 0;
> > + wol->wolopts = device_may_wakeup(cdev->dev) ? WAKE_PHY : 0;
> > +}
> > +
> > +static int m_can_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
> > +{
> > + struct m_can_classdev *cdev = netdev_priv(dev);
> > + bool wol_enable = !!(wol->wolopts & WAKE_PHY);
> > + int ret;
> > +
> > + if ((wol->wolopts & WAKE_PHY) != wol->wolopts)
>
> Here, you want to check if a bit other than WAKE_PHY is set, isn't it?
> What about doing this:
>
> if (wol->wolopts & ~WAKE_PHY)
>
> instead?
Yes, thanks, that is better. Thank you for your reviews!
Best
Markus
>
> > + return -EINVAL;
> > +
> > + if (wol_enable == device_may_wakeup(cdev->dev))
> > + return 0;
> > +
> > + ret = device_set_wakeup_enable(cdev->dev, wol_enable);
> > + if (ret) {
> > + netdev_err(cdev->net, "Failed to set wakeup enable %pE\n",
> > + ERR_PTR(ret));
> > + return ret;
> > + }
> > +
> > + return 0;
> > +}
> > +
> > static const struct ethtool_ops m_can_ethtool_ops_coalescing = {
> > .supported_coalesce_params = ETHTOOL_COALESCE_RX_USECS_IRQ |
> > ETHTOOL_COALESCE_RX_MAX_FRAMES_IRQ |
> > @@ -2194,10 +2224,14 @@ static const struct ethtool_ops m_can_ethtool_ops_coalescing = {
> > .get_ts_info = ethtool_op_get_ts_info,
> > .get_coalesce = m_can_get_coalesce,
> > .set_coalesce = m_can_set_coalesce,
> > + .get_wol = m_can_get_wol,
> > + .set_wol = m_can_set_wol,
> > };
> >
> > static const struct ethtool_ops m_can_ethtool_ops = {
> > .get_ts_info = ethtool_op_get_ts_info,
> > + .get_wol = m_can_get_wol,
> > + .set_wol = m_can_set_wol,
> > };
> >
> > static int register_m_can_dev(struct m_can_classdev *cdev)
> > @@ -2324,6 +2358,9 @@ struct m_can_classdev *m_can_class_allocate_dev(struct device *dev,
> > goto out;
> > }
> >
> > + if (dev->of_node && of_property_read_bool(dev->of_node, "wakeup-source"))
> > + device_set_wakeup_capable(dev, true);
> > +
> > /* Get TX FIFO size
> > * Defines the total amount of echo buffers for loopback
> > */
> >
> > --
> > 2.45.2
> >
> >
Download attachment "signature.asc" of type "application/pgp-signature" (229 bytes)
Powered by blists - more mailing lists