netdev - Re: [PATCH v3 net-next 02/13] dt-bindings: net: add i.MX95 ENETC support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <ZxE56eMyN791RsgK@lizhi-Precision-Tower-5810>
Date: Thu, 17 Oct 2024 12:23:05 -0400
From: Frank Li <Frank.li@....com>
To: Wei Fang <wei.fang@....com>
Cc: davem@...emloft.net, edumazet@...gle.com, kuba@...nel.org,
	pabeni@...hat.com, robh@...nel.org, krzk+dt@...nel.org,
	conor+dt@...nel.org, vladimir.oltean@....com,
	claudiu.manoil@....com, xiaoning.wang@....com,
	christophe.leroy@...roup.eu, linux@...linux.org.uk,
	bhelgaas@...gle.com, horms@...nel.org, imx@...ts.linux.dev,
	netdev@...r.kernel.org, devicetree@...r.kernel.org,
	linux-kernel@...r.kernel.org, linux-pci@...r.kernel.org
Subject: Re: [PATCH v3 net-next 02/13] dt-bindings: net: add i.MX95 ENETC
 support

On Thu, Oct 17, 2024 at 03:46:26PM +0800, Wei Fang wrote:
> The ENETC of i.MX95 has been upgraded to revision 4.1, and the vendor
> ID and device ID have also changed, so add the new compatible strings
> for i.MX95 ENETC. In addition, i.MX95 supports configuration of RGMII
> or RMII reference clock.
>
> Signed-off-by: Wei Fang <wei.fang@....com>
> ---
> v2: Remove "nxp,imx95-enetc" compatible string.
> v3:
> 1. Add restriction to "clcoks" and "clock-names" properties and rename
> the clock, also remove the items from these two properties.
> 2. Remove unnecessary items for "pci1131,e101" compatible string.
> ---
>  .../devicetree/bindings/net/fsl,enetc.yaml    | 22 ++++++++++++++++---
>  1 file changed, 19 insertions(+), 3 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/net/fsl,enetc.yaml b/Documentation/devicetree/bindings/net/fsl,enetc.yaml
> index e152c93998fe..e418c3e6e6b1 100644
> --- a/Documentation/devicetree/bindings/net/fsl,enetc.yaml
> +++ b/Documentation/devicetree/bindings/net/fsl,enetc.yaml
> @@ -20,10 +20,13 @@ maintainers:
>
>  properties:
>    compatible:
> -    items:
> +    oneOf:
> +      - items:
> +          - enum:
> +              - pci1957,e100
> +          - const: fsl,enetc
>        - enum:
> -          - pci1957,e100
> -      - const: fsl,enetc
> +          - pci1131,e101
>
>    reg:
>      maxItems: 1
> @@ -40,6 +43,19 @@ required:
>  allOf:
>    - $ref: /schemas/pci/pci-device.yaml
>    - $ref: ethernet-controller.yaml
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            enum:
> +              - pci1131,e101
> +    then:
> +      properties:
> +        clocks:
> +          maxItems: 1
> +          description: MAC transmit/receiver reference clock
> +        clock-names:
> +          const: ref

Did you run CHECK_DTBS for your dts file? clocks\clock-names should be
under top 'properties" firstly. Then use 'if' restrict it. But I am not
sure for that. only dt_binding_check is not enough because your example
have not use clocks and clok-names.

Frank

>
>  unevaluatedProperties: false
>
> --
> 2.34.1
>