[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <ZxKWGBAMsVqsnS87@test-OptiPlex-Tower-Plus-7010>
Date: Fri, 18 Oct 2024 22:38:40 +0530
From: Hariprasad Kelam <hkelam@...vell.com>
To: Lorenz Brun <lorenz@...n.one>
CC: Igor Russkikh <irusskikh@...vell.com>,
"David S. Miller"
<davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>, Jakub Kicinski
<kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>, <netdev@...r.kernel.org>,
<linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v3] net: atlantic: support reading SFP module info
On 2024-10-18 at 21:17:38, Lorenz Brun (lorenz@...n.one) wrote:
> Add support for reading SFP module info and digital diagnostic
> monitoring data if supported by the module. The only Aquantia
> controller without an integrated PHY is the AQC100 which belongs to
> the B0 revision, that's why it's only implemented there.
>
> The register information was extracted from a diagnostic tool made
> publicly available by Dell, but all code was written from scratch by me.
>
> This has been tested to work with a variety of both optical and direct
> attach modules I had lying around and seems to work fine with all of
> them, including the diagnostics if supported by an optical module.
> All tests have been done with an AQC100 on an TL-NT521F card on firmware
> version 3.1.121 (current at the time of this patch).
>
> Signed-off-by: Lorenz Brun <lorenz@...n.one>
> ---
Since this is not a fix, please submit this patch to "net-next"
tree by changing the subject prefix.
Powered by blists - more mailing lists