[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20241019085716.GP1697@kernel.org>
Date: Sat, 19 Oct 2024 09:57:16 +0100
From: Simon Horman <horms@...nel.org>
To: Lorenz Brun <lorenz@...n.one>
Cc: Igor Russkikh <irusskikh@...vell.com>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>,
netdev@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH net-next v3] net: atlantic: support reading SFP module
info
On Fri, Oct 18, 2024 at 07:17:18PM +0200, Lorenz Brun wrote:
> Add support for reading SFP module info and digital diagnostic
> monitoring data if supported by the module. The only Aquantia
> controller without an integrated PHY is the AQC100 which belongs to
> the B0 revision, that's why it's only implemented there.
>
> The register information was extracted from a diagnostic tool made
> publicly available by Dell, but all code was written from scratch by me.
>
> This has been tested to work with a variety of both optical and direct
> attach modules I had lying around and seems to work fine with all of
> them, including the diagnostics if supported by an optical module.
> All tests have been done with an AQC100 on an TL-NT521F card on firmware
> version 3.1.121 (current at the time of this patch).
>
> Signed-off-by: Lorenz Brun <lorenz@...n.one>
> ---
> No content changes, thus resent as v3 with just the target tree changed.
Reviewed-by: Simon Horman <horms@...nel.org>
Powered by blists - more mailing lists