netdev - [PATCH v1] net: stmmac: enable MAC after MTL configuring

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <tencent_CCC29C4F562F2DEFE48289DB52F4D91BDE05@qq.com>
Date: Mon, 21 Oct 2024 09:03:05 +0800
From: 2694439648@...com
To: alexandre.torgue@...s.st.com,
	joabreu@...opsys.com,
	davem@...emloft.net,
	edumazet@...gle.com,
	kuba@...nel.org,
	pabeni@...hat.com,
	mcoquelin.stm32@...il.com
Cc: netdev@...r.kernel.org,
	linux-stm32@...md-mailman.stormreply.com,
	linux-arm-kernel@...ts.infradead.org,
	linux-kernel@...r.kernel.org,
	hailong.fan@...ngine.com
Subject: [PATCH v1] net: stmmac: enable MAC after MTL configuring

From: "hailong.fan" <hailong.fan@...ngine.com>

DMA maybe block while ETH is opening,
Adjust the enable sequence, put the MAC enable last

For example, ETH is directly connected to the switch,
which never power down and sends broadcast packets at regular intervals.
During the process of opening ETH, data may flow into the MTL FIFO,
once MAC RX is enabled. and then, MTL will be set, such as FIFO size.
Once enable DMA, There is a certain probability that DMA will read
incorrect data from MTL FIFO, causing DMA to hang up.
By read DMA_Debug_Status, you can be observed that the RPS remains at
a certain value forever. The correct process should be to configure
MAC/MTL/DMA before enabling DMA/MAC

Signed-off-by: hailong.fan <hailong.fan@...ngine.com>

---
V0-V1:
   1. update commit messages
---
 drivers/net/ethernet/stmicro/stmmac/dwmac4_lib.c   |  8 --------
 drivers/net/ethernet/stmicro/stmmac/dwxgmac2_dma.c | 12 ------------
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c  |  6 +++---
 3 files changed, 3 insertions(+), 23 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_lib.c b/drivers/net/ethernet/stmicro/stmmac/dwmac4_lib.c
index 0d185e54e..92448d858 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_lib.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_lib.c
@@ -50,10 +50,6 @@ void dwmac4_dma_start_tx(struct stmmac_priv *priv, void __iomem *ioaddr,
 
 	value |= DMA_CONTROL_ST;
 	writel(value, ioaddr + DMA_CHAN_TX_CONTROL(dwmac4_addrs, chan));
-
-	value = readl(ioaddr + GMAC_CONFIG);
-	value |= GMAC_CONFIG_TE;
-	writel(value, ioaddr + GMAC_CONFIG);
 }
 
 void dwmac4_dma_stop_tx(struct stmmac_priv *priv, void __iomem *ioaddr,
@@ -77,10 +73,6 @@ void dwmac4_dma_start_rx(struct stmmac_priv *priv, void __iomem *ioaddr,
 	value |= DMA_CONTROL_SR;
 
 	writel(value, ioaddr + DMA_CHAN_RX_CONTROL(dwmac4_addrs, chan));
-
-	value = readl(ioaddr + GMAC_CONFIG);
-	value |= GMAC_CONFIG_RE;
-	writel(value, ioaddr + GMAC_CONFIG);
 }
 
 void dwmac4_dma_stop_rx(struct stmmac_priv *priv, void __iomem *ioaddr,
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_dma.c b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_dma.c
index 7840bc403..cba12edc1 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_dma.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_dma.c
@@ -288,10 +288,6 @@ static void dwxgmac2_dma_start_tx(struct stmmac_priv *priv,
 	value = readl(ioaddr + XGMAC_DMA_CH_TX_CONTROL(chan));
 	value |= XGMAC_TXST;
 	writel(value, ioaddr + XGMAC_DMA_CH_TX_CONTROL(chan));
-
-	value = readl(ioaddr + XGMAC_TX_CONFIG);
-	value |= XGMAC_CONFIG_TE;
-	writel(value, ioaddr + XGMAC_TX_CONFIG);
 }
 
 static void dwxgmac2_dma_stop_tx(struct stmmac_priv *priv, void __iomem *ioaddr,
@@ -302,10 +298,6 @@ static void dwxgmac2_dma_stop_tx(struct stmmac_priv *priv, void __iomem *ioaddr,
 	value = readl(ioaddr + XGMAC_DMA_CH_TX_CONTROL(chan));
 	value &= ~XGMAC_TXST;
 	writel(value, ioaddr + XGMAC_DMA_CH_TX_CONTROL(chan));
-
-	value = readl(ioaddr + XGMAC_TX_CONFIG);
-	value &= ~XGMAC_CONFIG_TE;
-	writel(value, ioaddr + XGMAC_TX_CONFIG);
 }
 
 static void dwxgmac2_dma_start_rx(struct stmmac_priv *priv,
@@ -316,10 +308,6 @@ static void dwxgmac2_dma_start_rx(struct stmmac_priv *priv,
 	value = readl(ioaddr + XGMAC_DMA_CH_RX_CONTROL(chan));
 	value |= XGMAC_RXST;
 	writel(value, ioaddr + XGMAC_DMA_CH_RX_CONTROL(chan));
-
-	value = readl(ioaddr + XGMAC_RX_CONFIG);
-	value |= XGMAC_CONFIG_RE;
-	writel(value, ioaddr + XGMAC_RX_CONFIG);
 }
 
 static void dwxgmac2_dma_stop_rx(struct stmmac_priv *priv, void __iomem *ioaddr,
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index e21404822..c19ca62a4 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -3437,9 +3437,6 @@ static int stmmac_hw_setup(struct net_device *dev, bool ptp_register)
 		priv->hw->rx_csum = 0;
 	}
 
-	/* Enable the MAC Rx/Tx */
-	stmmac_mac_set(priv, priv->ioaddr, true);
-
 	/* Set the HW DMA mode and the COE */
 	stmmac_dma_operation_mode(priv);
 
@@ -3523,6 +3520,9 @@ static int stmmac_hw_setup(struct net_device *dev, bool ptp_register)
 	/* Start the ball rolling... */
 	stmmac_start_all_dma(priv);
 
+	/* Enable the MAC Rx/Tx */
+	stmmac_mac_set(priv, priv->ioaddr, true);
+
 	stmmac_set_hw_vlan_mode(priv, priv->hw);
 
 	return 0;
-- 
2.34.1