[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <172953337183.748181.12748276548047622670.robh@kernel.org>
Date: Mon, 21 Oct 2024 12:58:30 -0500
From: "Rob Herring (Arm)" <robh@...nel.org>
To: Nícolas F. R. A. Prado <nfraprado@...labora.com>
Cc: Richard Cochran <richardcochran@...il.com>,
Andrew Lunn <andrew@...n.ch>, Matthias Brugger <matthias.bgg@...il.com>,
Macpaul Lin <macpaul.lin@...iatek.com>, devicetree@...r.kernel.org,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
fanyi zhang <fanyi.zhang@...iatek.com>,
linux-arm-kernel@...ts.infradead.org, kernel@...labora.com,
Jianguo Zhang <jianguo.zhang@...iatek.com>,
Hsuan-Yu Lin <shane.lin@...onical.com>, Conor Dooley <conor+dt@...nel.org>,
linux-kernel@...r.kernel.org, linux-mediatek@...ts.infradead.org,
netdev@...r.kernel.org, Pablo Sun <pablo.sun@...iatek.com>,
AngeloGioacchino Del Regno <angelogioacchino.delregno@...labora.com>
Subject: Re: [PATCH v2 0/2] Enable Ethernet on the Genio 700 EVK board
On Fri, 18 Oct 2024 11:19:01 -0400, Nícolas F. R. A. Prado wrote:
> The patches in this series add the ethernet node on mt8188 and enable it
> on the Genio 700 EVK board.
>
> The changes were picked up from the downstream branch at
> https://git.launchpad.net/~canonical-kernel/ubuntu/+source/linux-mtk/+git/jammy,
> cleaned up and split into two commits.
>
> Signed-off-by: Nícolas F. R. A. Prado <nfraprado@...labora.com>
> ---
> Changes in v2:
> - Moved mdio bus to mt8188.dtsi
> - Changed phy-mode: rgmii-rxid -> rgmii-id
> - Removed mediatek,tx-delay-ps
> - style: Reordered vendor properties alphabetically
> - style: Used fewer lines for clock-names
> - Fixed typo in commit message: 1000 Gbps -> 1000 Mbps
> - Link to v1: https://lore.kernel.org/r/20241015-genio700-eth-v1-0-16a1c9738cf4@collabora.com
>
> ---
> Nícolas F. R. A. Prado (2):
> arm64: dts: mediatek: mt8188: Add ethernet node
> arm64: dts: mediatek: mt8390-genio-700-evk: Enable ethernet
>
> arch/arm64/boot/dts/mediatek/mt8188.dtsi | 97 ++++++++++++++++++++++
> .../boot/dts/mediatek/mt8390-genio-700-evk.dts | 20 +++++
> 2 files changed, 117 insertions(+)
> ---
> base-commit: 7f773fd61baa9b136faa5c4e6555aa64c758d07c
> change-id: 20241015-genio700-eth-252304da766c
>
> Best regards,
> --
> Nícolas F. R. A. Prado <nfraprado@...labora.com>
>
>
My bot found new DTB warnings on the .dts files added or changed in this
series.
Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings
are fixed by another series. Ultimately, it is up to the platform
maintainer whether these warnings are acceptable or not. No need to reply
unless the platform maintainer has comments.
If you already ran DT checks and didn't see these error(s), then
make sure dt-schema is up to date:
pip3 install dtschema --upgrade
New warnings running 'make CHECK_DTBS=y mediatek/mt8390-genio-700-evk.dtb' for 20241018-genio700-eth-v2-0-f3c73b85507b@...labora.com:
arch/arm64/boot/dts/mediatek/mt8390-genio-700-evk.dtb: jpeg-decoder@...40000: iommus: [[118, 685], [118, 686], [118, 690], [118, 691], [118, 692], [118, 693]] is too long
from schema $id: http://devicetree.org/schemas/media/mediatek-jpeg-decoder.yaml#
Powered by blists - more mailing lists