[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <zum7n3656qonk4sdfu76owfs4jk2mkjrzayd57uuoqeb6iiris@635pw3mqymqd>
Date: Wed, 23 Oct 2024 08:41:36 +0800
From: Inochi Amaoto <inochiama@...il.com>
To: Andrew Lunn <andrew@...n.ch>, Inochi Amaoto <inochiama@...il.com>
Cc: Chen Wang <unicorn_wang@...look.com>,
Andrew Lunn <andrew+netdev@...n.ch>, "David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>, Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>, Conor Dooley <conor+dt@...nel.org>,
Inochi Amaoto <inochiama@...look.com>, Alexandre Torgue <alexandre.torgue@...s.st.com>,
Jose Abreu <joabreu@...opsys.com>, Maxime Coquelin <mcoquelin.stm32@...il.com>,
Richard Cochran <richardcochran@...il.com>, Paul Walmsley <paul.walmsley@...ive.com>,
Palmer Dabbelt <palmer@...belt.com>, Albert Ou <aou@...s.berkeley.edu>,
Giuseppe Cavallaro <peppe.cavallaro@...com>, Yixun Lan <dlan@...too.org>, netdev@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-stm32@...md-mailman.stormreply.com, linux-arm-kernel@...ts.infradead.org,
linux-riscv@...ts.infradead.org
Subject: Re: [PATCH 4/4] net: stmmac: Add glue layer for Sophgo SG2044 SoC
On Tue, Oct 22, 2024 at 03:51:08PM +0200, Andrew Lunn wrote:
> On Tue, Oct 22, 2024 at 06:21:49PM +0800, Inochi Amaoto wrote:
> > On Mon, Oct 21, 2024 at 03:27:18PM +0200, Andrew Lunn wrote:
> > > > It is related to the RGMII delay. On sg2044, when the phy
> > > > sets rx-delay, the interal mac is not set the same delay,
> > > > so this is needed to be set.
> > >
> > > This is the wrong way to do it. Please look at how phy-mode should be
> > > used, the four different "rgmii" values. Nearly everybody gets this
> > > wrong, so there are plenty of emails from me in the netdev list about
> > > how it should be done.
> > >
> >
> > The phy-mode is alreay set to the "rgmii-id" and a rx delay is already
> > set (a default tx delay is set by the phy driver). In the scenario
> > the extra bit is used to fix 2ns difference between the sampling clock
> > and data. It is more like an extra setting and the kernel can not handle
> > it by only setting the phy-mode.
>
> This sounds wrong.
>
> So in DT you have rgmii-id? You say the PHY is doing TX delay. So you
> pass PHY_INTERFACE_MODE_RGMII_TXID to the PHY? It is not clear from
> this patch, i don't see any code mentioning
> PHY_INTERFACE_MODE_RGMII_TXID. Could you point me at that code.
>
> Andrew
The phy on the board I have is YT8531, The config code is here:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/net/phy/motorcomm.c#n868
As the syscon only has a config on rx delay. I have
already fix the code and only set the bit when the
mac is rgmii-rxid/id.
Regards,
Inochi.
Powered by blists - more mailing lists