netdev - [PATCH net-next 0/4] Support loopback mode speed selection

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20241028203804.41689-1-gerhard@engleder-embedded.com>
Date: Mon, 28 Oct 2024 21:38:00 +0100
From: Gerhard Engleder <gerhard@...leder-embedded.com>
To: andrew@...n.ch,
	hkallweit1@...il.com,
	linux@...linux.org.uk,
	davem@...emloft.net,
	edumazet@...gle.com,
	kuba@...nel.org,
	pabeni@...hat.com
Cc: netdev@...r.kernel.org,
	Gerhard Engleder <gerhard@...leder-embedded.com>
Subject: [PATCH net-next 0/4] Support loopback mode speed selection

Previously to commit 6ff3cddc365b
("net: phylib: do not disable autoneg for fixed speeds >= 1G") it was
possible to select the speed of the loopback mode by configuring a fixed
speed before enabling the loopback mode. Now autoneg is always enabled
for >= 1G and a fixed speed of >= 1G requires successful autoneg. Thus,
the speed of the loopback mode depends on the link partner for >= 1G.
There is no technical reason to depend on the link partner for loopback
mode. With this behavior the loopback mode is less useful for testing.

Allow PHYs to support optional speed selection for the loopback mode.
This support is implemented for the generic loopback support and for PHY
drivers, which obviously support speed selection for loopback mode.
Additionally, loopback support according to the data sheet is added to
the KSZ9031 PHY.

Use this loopback speed selection in the tsnep driver to select the
loopback mode speed depending the previously active speed. User space
tests with 100 Mbps and 1 Gbps loopback are possible again.

Gerhard Engleder (4):
  net: phy: Allow loopback speed selection for PHY drivers
  net: phy: Support speed selection for PHY loopback
  net: phy: micrel: Add loopback support
  tsnep: Select speed for loopback

 drivers/net/ethernet/engleder/tsnep_main.c    | 12 +++++++-
 .../net/ethernet/hisilicon/hns/hns_ethtool.c  |  4 +--
 .../hisilicon/hns3/hns3pf/hclge_main.c        |  4 +--
 .../hisilicon/hns3/hns3pf/hclge_mdio.c        |  2 +-
 .../stmicro/stmmac/stmmac_selftests.c         |  8 +++---
 drivers/net/phy/adin1100.c                    |  5 +++-
 drivers/net/phy/dp83867.c                     |  5 +++-
 drivers/net/phy/marvell.c                     |  8 +++++-
 drivers/net/phy/micrel.c                      | 28 +++++++++++++++++++
 drivers/net/phy/mxl-gpy.c                     | 11 +++++---
 drivers/net/phy/phy-c45.c                     |  5 +++-
 drivers/net/phy/phy_device.c                  | 14 +++++++---
 drivers/net/phy/xilinx_gmii2rgmii.c           |  7 +++--
 include/linux/phy.h                           | 18 ++++++++----
 net/core/selftests.c                          |  4 +--
 15 files changed, 103 insertions(+), 32 deletions(-)

-- 
2.39.2