[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <0bc2809fe2a6c11dd4c8a9a10d9bd65cccdb559b.1730238285.git.gustavoars@kernel.org>
Date: Tue, 29 Oct 2024 15:58:47 -0600
From: "Gustavo A. R. Silva" <gustavoars@...nel.org>
To: Michael Chan <michael.chan@...adcom.com>,
Andrew Lunn <andrew+netdev@...n.ch>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>,
Potnuri Bharat Teja <bharat@...lsio.com>,
Christian Benvenuti <benve@...co.com>,
Satish Kharat <satishkh@...co.com>,
Manish Chopra <manishc@...vell.com>
Cc: netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
"Gustavo A. R. Silva" <gustavoars@...nel.org>,
linux-hardening@...r.kernel.org
Subject: [PATCH v2 2/2][next] net: ethtool: Avoid thousands of
-Wflex-array-member-not-at-end warnings
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.
Change the type of the middle struct member currently causing trouble from
`struct ethtool_link_settings` to `struct ethtool_link_settings_hdr`.
Additionally, update the type of some variables in various functions that
don't access the flexible-array member, changing them to the newly created
`struct ethtool_link_settings_hdr`. These changes are needed because the
type of the conflicting middle members changed. So, those instances that
expect the type to be `struct ethtool_link_settings` should be adjusted to
the newly created type `struct ethtool_link_settings_hdr`.
Also, adjust variable declarations to follow the reverse xmas tree
convention.
Fix 3338 of the following -Wflex-array-member-not-at-end warnings:
include/linux/ethtool.h:214:38: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Signed-off-by: Gustavo A. R. Silva <gustavoars@...nel.org>
---
Changes in v2:
- Update changelog text in patch to better reflect the changes
made. (Jakub)
- Adjust variable declarations to follow the reverse xmas tree
convention. (Jakub)
v1:
- Link: https://lore.kernel.org/linux-hardening/f4f8ca5cd7f039bcab816194342c7b6101e891fe.1729536776.git.gustavoars@kernel.org/
.../net/ethernet/broadcom/bnxt/bnxt_ethtool.c | 6 +++---
.../net/ethernet/chelsio/cxgb4/cxgb4_ethtool.c | 4 ++--
.../ethernet/chelsio/cxgb4vf/cxgb4vf_main.c | 2 +-
drivers/net/ethernet/cisco/enic/enic_ethtool.c | 2 +-
.../net/ethernet/qlogic/qede/qede_ethtool.c | 4 ++--
include/linux/ethtool.h | 2 +-
net/ethtool/ioctl.c | 2 +-
net/ethtool/linkinfo.c | 8 ++++----
net/ethtool/linkmodes.c | 18 +++++++++++-------
9 files changed, 26 insertions(+), 22 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
index f71cc8188b4e..e0ebe69110bf 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
@@ -2781,7 +2781,7 @@ u32 bnxt_fw_to_ethtool_speed(u16 fw_link_speed)
static void bnxt_get_default_speeds(struct ethtool_link_ksettings *lk_ksettings,
struct bnxt_link_info *link_info)
{
- struct ethtool_link_settings *base = &lk_ksettings->base;
+ struct ethtool_link_settings_hdr *base = &lk_ksettings->base;
if (link_info->link_state == BNXT_LINK_STATE_UP) {
base->speed = bnxt_fw_to_ethtool_speed(link_info->link_speed);
@@ -2800,7 +2800,7 @@ static void bnxt_get_default_speeds(struct ethtool_link_ksettings *lk_ksettings,
static int bnxt_get_link_ksettings(struct net_device *dev,
struct ethtool_link_ksettings *lk_ksettings)
{
- struct ethtool_link_settings *base = &lk_ksettings->base;
+ struct ethtool_link_settings_hdr *base = &lk_ksettings->base;
enum ethtool_link_mode_bit_indices link_mode;
struct bnxt *bp = netdev_priv(dev);
struct bnxt_link_info *link_info;
@@ -3023,9 +3023,9 @@ u16 bnxt_get_fw_auto_link_speeds(const unsigned long *mode)
static int bnxt_set_link_ksettings(struct net_device *dev,
const struct ethtool_link_ksettings *lk_ksettings)
{
+ const struct ethtool_link_settings_hdr *base = &lk_ksettings->base;
struct bnxt *bp = netdev_priv(dev);
struct bnxt_link_info *link_info = &bp->link_info;
- const struct ethtool_link_settings *base = &lk_ksettings->base;
bool set_pause = false;
u32 speed, lanes = 0;
int rc = 0;
diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_ethtool.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_ethtool.c
index 7f3f5afa864f..45d28a65347e 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_ethtool.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_ethtool.c
@@ -662,8 +662,8 @@ static unsigned int lmm_to_fw_caps(const unsigned long *link_mode_mask)
static int get_link_ksettings(struct net_device *dev,
struct ethtool_link_ksettings *link_ksettings)
{
+ struct ethtool_link_settings_hdr *base = &link_ksettings->base;
struct port_info *pi = netdev_priv(dev);
- struct ethtool_link_settings *base = &link_ksettings->base;
/* For the nonce, the Firmware doesn't send up Port State changes
* when the Virtual Interface attached to the Port is down. So
@@ -717,9 +717,9 @@ static int get_link_ksettings(struct net_device *dev,
static int set_link_ksettings(struct net_device *dev,
const struct ethtool_link_ksettings *link_ksettings)
{
+ const struct ethtool_link_settings_hdr *base = &link_ksettings->base;
struct port_info *pi = netdev_priv(dev);
struct link_config *lc = &pi->link_cfg;
- const struct ethtool_link_settings *base = &link_ksettings->base;
struct link_config old_lc;
unsigned int fw_caps;
int ret = 0;
diff --git a/drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c b/drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c
index 2fbe0f059a0b..61d08547e3f9 100644
--- a/drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c
+++ b/drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c
@@ -1436,8 +1436,8 @@ static void fw_caps_to_lmm(enum fw_port_type port_type,
static int cxgb4vf_get_link_ksettings(struct net_device *dev,
struct ethtool_link_ksettings *link_ksettings)
{
+ struct ethtool_link_settings_hdr *base = &link_ksettings->base;
struct port_info *pi = netdev_priv(dev);
- struct ethtool_link_settings *base = &link_ksettings->base;
/* For the nonce, the Firmware doesn't send up Port State changes
* when the Virtual Interface attached to the Port is down. So
diff --git a/drivers/net/ethernet/cisco/enic/enic_ethtool.c b/drivers/net/ethernet/cisco/enic/enic_ethtool.c
index f7986f2b6a17..4fe85780a950 100644
--- a/drivers/net/ethernet/cisco/enic/enic_ethtool.c
+++ b/drivers/net/ethernet/cisco/enic/enic_ethtool.c
@@ -129,8 +129,8 @@ static void enic_intr_coal_set_rx(struct enic *enic, u32 timer)
static int enic_get_ksettings(struct net_device *netdev,
struct ethtool_link_ksettings *ecmd)
{
+ struct ethtool_link_settings_hdr *base = &ecmd->base;
struct enic *enic = netdev_priv(netdev);
- struct ethtool_link_settings *base = &ecmd->base;
ethtool_link_ksettings_add_link_mode(ecmd, supported,
10000baseT_Full);
diff --git a/drivers/net/ethernet/qlogic/qede/qede_ethtool.c b/drivers/net/ethernet/qlogic/qede/qede_ethtool.c
index 97b059be1041..24ff154285ac 100644
--- a/drivers/net/ethernet/qlogic/qede/qede_ethtool.c
+++ b/drivers/net/ethernet/qlogic/qede/qede_ethtool.c
@@ -508,7 +508,7 @@ static int qede_get_link_ksettings(struct net_device *dev,
struct ethtool_link_ksettings *cmd)
{
typeof(cmd->link_modes) *link_modes = &cmd->link_modes;
- struct ethtool_link_settings *base = &cmd->base;
+ struct ethtool_link_settings_hdr *base = &cmd->base;
struct qede_dev *edev = netdev_priv(dev);
struct qed_link_output current_link;
@@ -541,7 +541,7 @@ static int qede_get_link_ksettings(struct net_device *dev,
static int qede_set_link_ksettings(struct net_device *dev,
const struct ethtool_link_ksettings *cmd)
{
- const struct ethtool_link_settings *base = &cmd->base;
+ const struct ethtool_link_settings_hdr *base = &cmd->base;
const struct ethtool_forced_speed_map *map;
struct qede_dev *edev = netdev_priv(dev);
struct qed_link_output current_link;
diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h
index 12f6dc567598..1199e308c8dd 100644
--- a/include/linux/ethtool.h
+++ b/include/linux/ethtool.h
@@ -211,7 +211,7 @@ void ethtool_rxfh_context_lost(struct net_device *dev, u32 context_id);
* fields, but they are allowed to overwrite them (will be ignored).
*/
struct ethtool_link_ksettings {
- struct ethtool_link_settings base;
+ struct ethtool_link_settings_hdr base;
struct {
__ETHTOOL_DECLARE_LINK_MODE_MASK(supported);
__ETHTOOL_DECLARE_LINK_MODE_MASK(advertising);
diff --git a/net/ethtool/ioctl.c b/net/ethtool/ioctl.c
index 5cc131cdb1bc..7da94e26ced6 100644
--- a/net/ethtool/ioctl.c
+++ b/net/ethtool/ioctl.c
@@ -425,7 +425,7 @@ convert_link_ksettings_to_legacy_settings(
/* layout of the struct passed from/to userland */
struct ethtool_link_usettings {
- struct ethtool_link_settings base;
+ struct ethtool_link_settings_hdr base;
struct {
__u32 supported[__ETHTOOL_LINK_MODE_MASK_NU32];
__u32 advertising[__ETHTOOL_LINK_MODE_MASK_NU32];
diff --git a/net/ethtool/linkinfo.c b/net/ethtool/linkinfo.c
index 30b8ce275159..2d5bc57160be 100644
--- a/net/ethtool/linkinfo.c
+++ b/net/ethtool/linkinfo.c
@@ -8,9 +8,9 @@ struct linkinfo_req_info {
};
struct linkinfo_reply_data {
- struct ethnl_reply_data base;
- struct ethtool_link_ksettings ksettings;
- struct ethtool_link_settings *lsettings;
+ struct ethnl_reply_data base;
+ struct ethtool_link_ksettings ksettings;
+ struct ethtool_link_settings_hdr *lsettings;
};
#define LINKINFO_REPDATA(__reply_base) \
@@ -98,7 +98,7 @@ static int
ethnl_set_linkinfo(struct ethnl_req_info *req_info, struct genl_info *info)
{
struct ethtool_link_ksettings ksettings = {};
- struct ethtool_link_settings *lsettings;
+ struct ethtool_link_settings_hdr *lsettings;
struct net_device *dev = req_info->dev;
struct nlattr **tb = info->attrs;
bool mod = false;
diff --git a/net/ethtool/linkmodes.c b/net/ethtool/linkmodes.c
index 259cd9ef1f2a..17e49cf89f03 100644
--- a/net/ethtool/linkmodes.c
+++ b/net/ethtool/linkmodes.c
@@ -11,10 +11,10 @@ struct linkmodes_req_info {
};
struct linkmodes_reply_data {
- struct ethnl_reply_data base;
- struct ethtool_link_ksettings ksettings;
- struct ethtool_link_settings *lsettings;
- bool peer_empty;
+ struct ethnl_reply_data base;
+ struct ethtool_link_ksettings ksettings;
+ struct ethtool_link_settings_hdr *lsettings;
+ bool peer_empty;
};
#define LINKMODES_REPDATA(__reply_base) \
@@ -62,10 +62,12 @@ static int linkmodes_reply_size(const struct ethnl_req_info *req_base,
{
const struct linkmodes_reply_data *data = LINKMODES_REPDATA(reply_base);
const struct ethtool_link_ksettings *ksettings = &data->ksettings;
- const struct ethtool_link_settings *lsettings = &ksettings->base;
bool compact = req_base->flags & ETHTOOL_FLAG_COMPACT_BITSETS;
+ const struct ethtool_link_settings_hdr *lsettings;
int len, ret;
+ lsettings = &ksettings->base;
+
len = nla_total_size(sizeof(u8)) /* LINKMODES_AUTONEG */
+ nla_total_size(sizeof(u32)) /* LINKMODES_SPEED */
+ nla_total_size(sizeof(u32)) /* LINKMODES_LANES */
@@ -103,10 +105,12 @@ static int linkmodes_fill_reply(struct sk_buff *skb,
{
const struct linkmodes_reply_data *data = LINKMODES_REPDATA(reply_base);
const struct ethtool_link_ksettings *ksettings = &data->ksettings;
- const struct ethtool_link_settings *lsettings = &ksettings->base;
bool compact = req_base->flags & ETHTOOL_FLAG_COMPACT_BITSETS;
+ const struct ethtool_link_settings_hdr *lsettings;
int ret;
+ lsettings = &ksettings->base;
+
if (nla_put_u8(skb, ETHTOOL_A_LINKMODES_AUTONEG, lsettings->autoneg))
return -EMSGSIZE;
@@ -237,7 +241,7 @@ static int ethnl_update_linkmodes(struct genl_info *info, struct nlattr **tb,
struct ethtool_link_ksettings *ksettings,
bool *mod, const struct net_device *dev)
{
- struct ethtool_link_settings *lsettings = &ksettings->base;
+ struct ethtool_link_settings_hdr *lsettings = &ksettings->base;
bool req_speed, req_lanes, req_duplex;
const struct nlattr *master_slave_cfg, *lanes_cfg;
int ret;
--
2.43.0
Powered by blists - more mailing lists