[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <ZyIH1rVt35JAFTW8@calimero.vinschen.de>
Date: Wed, 30 Oct 2024 11:17:58 +0100
From: Corinna Vinschen <vinschen@...hat.com>
To: Chris H <christopher.s.hall@...el.com>
Cc: intel-wired-lan@...ts.osuosl.org, david.zage@...el.com,
vinicius.gomes@...el.com, netdev@...r.kernel.org,
rodrigo.cadore@...coustics.com,
Michal Swiatkowski <michal.swiatkowski@...ux.intel.com>
Subject: Re: [PATCH iwl-net v2 1/4] igc: Ensure the PTM cycle is reliably
triggered
Hi Chris,
On Oct 23 02:30, Chris H wrote:
> From: Christopher S M Hall <christopher.s.hall@...el.com>
>
> Writing to clear the PTM status 'valid' bit while the PTM cycle is
> triggered results in unreliable PTM operation. To fix this, clear the
> PTM 'trigger' and status after each PTM transaction.
>
> The issue can be reproduced with the following:
>
> $ sudo phc2sys -R 1000 -O 0 -i tsn0 -m
>
> Note: 1000 Hz (-R 1000) is unrealistically large, but provides a way to
> quickly reproduce the issue.
>
> PHC2SYS exits with:
>
> "ioctl PTP_OFFSET_PRECISE: Connection timed out" when the PTM transaction
> fails
>
> Fixes: a90ec8483732 ("igc: Add support for PTP getcrosststamp()")
> Signed-off-by: Christopher S M Hall <christopher.s.hall@...el.com>
> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@...ux.intel.com>
In the v1 thread in August I asked for adding a description of the kdump
problem we observed to the commit message. I came up with this text,
maybe we can still add it, or maybe a shhortened version of it?
This patch also fixes a hang in igc_probe() when loading the igc
driver in the kdump kernel on systems supporting PTM.
The igc driver running in the base kernel enables PTM trigger in
igc_probe(). Therefore the driver is always in PTM trigger mode,
except in brief periods when manually triggering a PTM cycle.
When a crash occurs, the NIC is reset while PTM trigger is enabled.
Due to a hardware problem, the NIC is subsequently in a bad busmaster
state and doesn't handle register reads/writes. When running
igc_probe() in the kdump kernel, the first register access to a NIC
register hangs driver probing and ultimately breaks kdump.
With this patch, igc has PTM trigger disabled most of the time,
and the trigger is only enabled for very brief (10 - 100 us) periods
when manually triggering a PTM cycle. Chances that a crash occurs
during a PTM trigger are not 0, but extremly reduced.
Thanks,
Corinna
> ---
> drivers/net/ethernet/intel/igc/igc_defines.h | 1 +
> drivers/net/ethernet/intel/igc/igc_ptp.c | 70 ++++++++++++--------
> 2 files changed, 42 insertions(+), 29 deletions(-)
>
> diff --git a/drivers/net/ethernet/intel/igc/igc_defines.h b/drivers/net/ethernet/intel/igc/igc_defines.h
> index 8e449904aa7d..afd0512dc9f8 100644
> --- a/drivers/net/ethernet/intel/igc/igc_defines.h
> +++ b/drivers/net/ethernet/intel/igc/igc_defines.h
> @@ -593,6 +593,7 @@
> #define IGC_PTM_STAT_T4M1_OVFL BIT(3) /* T4 minus T1 overflow */
> #define IGC_PTM_STAT_ADJUST_1ST BIT(4) /* 1588 timer adjusted during 1st PTM cycle */
> #define IGC_PTM_STAT_ADJUST_CYC BIT(5) /* 1588 timer adjusted during non-1st PTM cycle */
> +#define IGC_PTM_STAT_ALL GENMASK(5, 0) /* Used to clear all status */
>
> /* PCIe PTM Cycle Control */
> #define IGC_PTM_CYCLE_CTRL_CYC_TIME(msec) ((msec) & 0x3ff) /* PTM Cycle Time (msec) */
> diff --git a/drivers/net/ethernet/intel/igc/igc_ptp.c b/drivers/net/ethernet/intel/igc/igc_ptp.c
> index 946edbad4302..00cc80d8d164 100644
> --- a/drivers/net/ethernet/intel/igc/igc_ptp.c
> +++ b/drivers/net/ethernet/intel/igc/igc_ptp.c
> @@ -974,11 +974,38 @@ static void igc_ptm_log_error(struct igc_adapter *adapter, u32 ptm_stat)
> }
> }
>
> +static void igc_ptm_trigger(struct igc_hw *hw)
> +{
> + u32 ctrl;
> +
> + /* To "manually" start the PTM cycle we need to set the
> + * trigger (TRIG) bit
> + */
> + ctrl = rd32(IGC_PTM_CTRL);
> + ctrl |= IGC_PTM_CTRL_TRIG;
> + wr32(IGC_PTM_CTRL, ctrl);
> + /* Perform flush after write to CTRL register otherwise
> + * transaction may not start
> + */
> + wrfl();
> +}
> +
> +static void igc_ptm_reset(struct igc_hw *hw)
> +{
> + u32 ctrl;
> +
> + ctrl = rd32(IGC_PTM_CTRL);
> + ctrl &= ~IGC_PTM_CTRL_TRIG;
> + wr32(IGC_PTM_CTRL, ctrl);
> + /* Write to clear all status */
> + wr32(IGC_PTM_STAT, IGC_PTM_STAT_ALL);
> +}
> +
> static int igc_phc_get_syncdevicetime(ktime_t *device,
> struct system_counterval_t *system,
> void *ctx)
> {
> - u32 stat, t2_curr_h, t2_curr_l, ctrl;
> + u32 stat, t2_curr_h, t2_curr_l;
> struct igc_adapter *adapter = ctx;
> struct igc_hw *hw = &adapter->hw;
> int err, count = 100;
> @@ -994,25 +1021,13 @@ static int igc_phc_get_syncdevicetime(ktime_t *device,
> * are transitory. Repeating the process returns valid
> * data eventually.
> */
> -
> - /* To "manually" start the PTM cycle we need to clear and
> - * then set again the TRIG bit.
> - */
> - ctrl = rd32(IGC_PTM_CTRL);
> - ctrl &= ~IGC_PTM_CTRL_TRIG;
> - wr32(IGC_PTM_CTRL, ctrl);
> - ctrl |= IGC_PTM_CTRL_TRIG;
> - wr32(IGC_PTM_CTRL, ctrl);
> -
> - /* The cycle only starts "for real" when software notifies
> - * that it has read the registers, this is done by setting
> - * VALID bit.
> - */
> - wr32(IGC_PTM_STAT, IGC_PTM_STAT_VALID);
> + igc_ptm_trigger(hw);
>
> err = readx_poll_timeout(rd32, IGC_PTM_STAT, stat,
> stat, IGC_PTM_STAT_SLEEP,
> IGC_PTM_STAT_TIMEOUT);
> + igc_ptm_reset(hw);
> +
> if (err < 0) {
> netdev_err(adapter->netdev, "Timeout reading IGC_PTM_STAT register\n");
> return err;
> @@ -1021,15 +1036,7 @@ static int igc_phc_get_syncdevicetime(ktime_t *device,
> if ((stat & IGC_PTM_STAT_VALID) == IGC_PTM_STAT_VALID)
> break;
>
> - if (stat & ~IGC_PTM_STAT_VALID) {
> - /* An error occurred, log it. */
> - igc_ptm_log_error(adapter, stat);
> - /* The STAT register is write-1-to-clear (W1C),
> - * so write the previous error status to clear it.
> - */
> - wr32(IGC_PTM_STAT, stat);
> - continue;
> - }
> + igc_ptm_log_error(adapter, stat);
> } while (--count);
>
> if (!count) {
> @@ -1255,7 +1262,7 @@ void igc_ptp_stop(struct igc_adapter *adapter)
> void igc_ptp_reset(struct igc_adapter *adapter)
> {
> struct igc_hw *hw = &adapter->hw;
> - u32 cycle_ctrl, ctrl;
> + u32 cycle_ctrl, ctrl, stat;
> unsigned long flags;
> u32 timadj;
>
> @@ -1290,14 +1297,19 @@ void igc_ptp_reset(struct igc_adapter *adapter)
> ctrl = IGC_PTM_CTRL_EN |
> IGC_PTM_CTRL_START_NOW |
> IGC_PTM_CTRL_SHRT_CYC(IGC_PTM_SHORT_CYC_DEFAULT) |
> - IGC_PTM_CTRL_PTM_TO(IGC_PTM_TIMEOUT_DEFAULT) |
> - IGC_PTM_CTRL_TRIG;
> + IGC_PTM_CTRL_PTM_TO(IGC_PTM_TIMEOUT_DEFAULT);
>
> wr32(IGC_PTM_CTRL, ctrl);
>
> /* Force the first cycle to run. */
> - wr32(IGC_PTM_STAT, IGC_PTM_STAT_VALID);
> + igc_ptm_trigger(hw);
> +
> + if (readx_poll_timeout_atomic(rd32, IGC_PTM_STAT, stat,
> + stat, IGC_PTM_STAT_SLEEP,
> + IGC_PTM_STAT_TIMEOUT))
> + netdev_err(adapter->netdev, "Timeout reading IGC_PTM_STAT register\n");
>
> + igc_ptm_reset(hw);
> break;
> default:
> /* No work to do. */
> --
> 2.34.1
Powered by blists - more mailing lists