| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20241106112513.9559-1-algonell@gmail.com>
Date: Wed, 6 Nov 2024 13:24:20 +0200
From: Andrew Kreimer <algonell@...il.com>
To: Karsten Keil <isdn@...ux-pingi.de>,
Jakub Kicinski <kuba@...nel.org>,
Jeff Johnson <quic_jjohnson@...cinc.com>,
Simon Horman <horms@...nel.org>,
Dan Carpenter <dan.carpenter@...aro.org>
Cc: netdev@...r.kernel.org,
linux-kernel@...r.kernel.org,
kernel-janitors@...r.kernel.org,
Andrew Kreimer <algonell@...il.com>
Subject: [PATCH net-next v2] mISDN: Fix typos
Fix typos:
- syncronized -> synchronized
- interfacs -> interface
- otherwhise -> otherwise
- ony -> only
- busses -> buses
- maxinum -> maximum
Via codespell.
Reported-by: Simon Horman <horms@...nel.org>
Signed-off-by: Andrew Kreimer <algonell@...il.com>
---
v1:
- Fix typos in printk messages.
- https://lore.kernel.org/netdev/20241102134856.11322-1-algonell@gmail.com/
v2:
- Address all non-false-positive suggestions, including comments.
- The syncronized ==> synchronized suggestions for struct hfc_multi were skipped.
drivers/isdn/hardware/mISDN/hfcmulti.c | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/drivers/isdn/hardware/mISDN/hfcmulti.c b/drivers/isdn/hardware/mISDN/hfcmulti.c
index e5a483fd9ad8..45ff0e198f8f 100644
--- a/drivers/isdn/hardware/mISDN/hfcmulti.c
+++ b/drivers/isdn/hardware/mISDN/hfcmulti.c
@@ -25,8 +25,8 @@
* Bit 8 = 0x00100 = uLaw (instead of aLaw)
* Bit 9 = 0x00200 = Disable DTMF detect on all B-channels via hardware
* Bit 10 = spare
- * Bit 11 = 0x00800 = Force PCM bus into slave mode. (otherwhise auto)
- * or Bit 12 = 0x01000 = Force PCM bus into master mode. (otherwhise auto)
+ * Bit 11 = 0x00800 = Force PCM bus into slave mode. (otherwise auto)
+ * or Bit 12 = 0x01000 = Force PCM bus into master mode. (otherwise auto)
* Bit 13 = spare
* Bit 14 = 0x04000 = Use external ram (128K)
* Bit 15 = 0x08000 = Use external ram (512K)
@@ -41,7 +41,7 @@
* port: (optional or required for all ports on all installed cards)
* HFC-4S/HFC-8S only bits:
* Bit 0 = 0x001 = Use master clock for this S/T interface
- * (ony once per chip).
+ * (only once per chip).
* Bit 1 = 0x002 = transmitter line setup (non capacitive mode)
* Don't use this unless you know what you are doing!
* Bit 2 = 0x004 = Disable E-channel. (No E-channel processing)
@@ -82,7 +82,7 @@
* By default (0), the PCM bus id is 100 for the card that is PCM master.
* If multiple cards are PCM master (because they are not interconnected),
* each card with PCM master will have increasing PCM id.
- * All PCM busses with the same ID are expected to be connected and have
+ * All PCM buses with the same ID are expected to be connected and have
* common time slots slots.
* Only one chip of the PCM bus must be master, the others slave.
* -1 means no support of PCM bus not even.
@@ -930,7 +930,7 @@ hfcmulti_resync(struct hfc_multi *locked, struct hfc_multi *newmaster, int rm)
if (newmaster) {
hc = newmaster;
if (debug & DEBUG_HFCMULTI_PLXSD)
- printk(KERN_DEBUG "id=%d (0x%p) = syncronized with "
+ printk(KERN_DEBUG "id=%d (0x%p) = synchronized with "
"interface.\n", hc->id, hc);
/* Enable new sync master */
plx_acc_32 = hc->plx_membase + PLX_GPIOC;
@@ -949,7 +949,7 @@ hfcmulti_resync(struct hfc_multi *locked, struct hfc_multi *newmaster, int rm)
hc = pcmmaster;
if (debug & DEBUG_HFCMULTI_PLXSD)
printk(KERN_DEBUG
- "id=%d (0x%p) = PCM master syncronized "
+ "id=%d (0x%p) = PCM master synchronized "
"with QUARTZ\n", hc->id, hc);
if (hc->ctype == HFC_TYPE_E1) {
/* Use the crystal clock for the PCM
@@ -2001,7 +2001,7 @@ hfcmulti_tx(struct hfc_multi *hc, int ch)
if (Zspace <= 0)
Zspace += hc->Zlen;
Zspace -= 4; /* keep not too full, so pointers will not overrun */
- /* fill transparent data only to maxinum transparent load (minus 4) */
+ /* fill transparent data only to maximum transparent load (minus 4) */
if (bch && test_bit(FLG_TRANSPARENT, &bch->Flags))
Zspace = Zspace - hc->Zlen + hc->max_trans;
if (Zspace <= 0) /* no space of 4 bytes */
@@ -4672,7 +4672,7 @@ init_e1_port_hw(struct hfc_multi *hc, struct hm_map *m)
if (debug & DEBUG_HFCMULTI_INIT)
printk(KERN_DEBUG
"%s: PORT set optical "
- "interfacs: card(%d) "
+ "interface: card(%d) "
"port(%d)\n",
__func__,
HFC_cnt + 1, 1);
Interdiff against v1:
diff --git a/drivers/isdn/hardware/mISDN/hfcmulti.c b/drivers/isdn/hardware/mISDN/hfcmulti.c
index f3af73ea34ae..45ff0e198f8f 100644
--- a/drivers/isdn/hardware/mISDN/hfcmulti.c
+++ b/drivers/isdn/hardware/mISDN/hfcmulti.c
@@ -25,8 +25,8 @@
* Bit 8 = 0x00100 = uLaw (instead of aLaw)
* Bit 9 = 0x00200 = Disable DTMF detect on all B-channels via hardware
* Bit 10 = spare
- * Bit 11 = 0x00800 = Force PCM bus into slave mode. (otherwhise auto)
- * or Bit 12 = 0x01000 = Force PCM bus into master mode. (otherwhise auto)
+ * Bit 11 = 0x00800 = Force PCM bus into slave mode. (otherwise auto)
+ * or Bit 12 = 0x01000 = Force PCM bus into master mode. (otherwise auto)
* Bit 13 = spare
* Bit 14 = 0x04000 = Use external ram (128K)
* Bit 15 = 0x08000 = Use external ram (512K)
@@ -41,7 +41,7 @@
* port: (optional or required for all ports on all installed cards)
* HFC-4S/HFC-8S only bits:
* Bit 0 = 0x001 = Use master clock for this S/T interface
- * (ony once per chip).
+ * (only once per chip).
* Bit 1 = 0x002 = transmitter line setup (non capacitive mode)
* Don't use this unless you know what you are doing!
* Bit 2 = 0x004 = Disable E-channel. (No E-channel processing)
@@ -82,7 +82,7 @@
* By default (0), the PCM bus id is 100 for the card that is PCM master.
* If multiple cards are PCM master (because they are not interconnected),
* each card with PCM master will have increasing PCM id.
- * All PCM busses with the same ID are expected to be connected and have
+ * All PCM buses with the same ID are expected to be connected and have
* common time slots slots.
* Only one chip of the PCM bus must be master, the others slave.
* -1 means no support of PCM bus not even.
@@ -2001,7 +2001,7 @@ hfcmulti_tx(struct hfc_multi *hc, int ch)
if (Zspace <= 0)
Zspace += hc->Zlen;
Zspace -= 4; /* keep not too full, so pointers will not overrun */
- /* fill transparent data only to maxinum transparent load (minus 4) */
+ /* fill transparent data only to maximum transparent load (minus 4) */
if (bch && test_bit(FLG_TRANSPARENT, &bch->Flags))
Zspace = Zspace - hc->Zlen + hc->max_trans;
if (Zspace <= 0) /* no space of 4 bytes */
Range-diff against v1:
1: e27df5ca2655 ! 1: 69784b0d548a mISDN: Fix typos
@@ Commit message
mISDN: Fix typos
Fix typos:
- - syncronized -> synchronized.
- - interfacs -> interface.
+ - syncronized -> synchronized
+ - interfacs -> interface
+ - otherwhise -> otherwise
+ - ony -> only
+ - busses -> buses
+ - maxinum -> maximum
+ Via codespell.
+
+ Reported-by: Simon Horman <horms@...nel.org>
Signed-off-by: Andrew Kreimer <algonell@...il.com>
## drivers/isdn/hardware/mISDN/hfcmulti.c ##
+@@
+ * Bit 8 = 0x00100 = uLaw (instead of aLaw)
+ * Bit 9 = 0x00200 = Disable DTMF detect on all B-channels via hardware
+ * Bit 10 = spare
+- * Bit 11 = 0x00800 = Force PCM bus into slave mode. (otherwhise auto)
+- * or Bit 12 = 0x01000 = Force PCM bus into master mode. (otherwhise auto)
++ * Bit 11 = 0x00800 = Force PCM bus into slave mode. (otherwise auto)
++ * or Bit 12 = 0x01000 = Force PCM bus into master mode. (otherwise auto)
+ * Bit 13 = spare
+ * Bit 14 = 0x04000 = Use external ram (128K)
+ * Bit 15 = 0x08000 = Use external ram (512K)
+@@
+ * port: (optional or required for all ports on all installed cards)
+ * HFC-4S/HFC-8S only bits:
+ * Bit 0 = 0x001 = Use master clock for this S/T interface
+- * (ony once per chip).
++ * (only once per chip).
+ * Bit 1 = 0x002 = transmitter line setup (non capacitive mode)
+ * Don't use this unless you know what you are doing!
+ * Bit 2 = 0x004 = Disable E-channel. (No E-channel processing)
+@@
+ * By default (0), the PCM bus id is 100 for the card that is PCM master.
+ * If multiple cards are PCM master (because they are not interconnected),
+ * each card with PCM master will have increasing PCM id.
+- * All PCM busses with the same ID are expected to be connected and have
++ * All PCM buses with the same ID are expected to be connected and have
+ * common time slots slots.
+ * Only one chip of the PCM bus must be master, the others slave.
+ * -1 means no support of PCM bus not even.
@@ drivers/isdn/hardware/mISDN/hfcmulti.c: hfcmulti_resync(struct hfc_multi *locked, struct hfc_multi *newmaster, int rm)
if (newmaster) {
hc = newmaster;
@@ drivers/isdn/hardware/mISDN/hfcmulti.c: hfcmulti_resync(struct hfc_multi *locked
"with QUARTZ\n", hc->id, hc);
if (hc->ctype == HFC_TYPE_E1) {
/* Use the crystal clock for the PCM
+@@ drivers/isdn/hardware/mISDN/hfcmulti.c: hfcmulti_tx(struct hfc_multi *hc, int ch)
+ if (Zspace <= 0)
+ Zspace += hc->Zlen;
+ Zspace -= 4; /* keep not too full, so pointers will not overrun */
+- /* fill transparent data only to maxinum transparent load (minus 4) */
++ /* fill transparent data only to maximum transparent load (minus 4) */
+ if (bch && test_bit(FLG_TRANSPARENT, &bch->Flags))
+ Zspace = Zspace - hc->Zlen + hc->max_trans;
+ if (Zspace <= 0) /* no space of 4 bytes */
@@ drivers/isdn/hardware/mISDN/hfcmulti.c: init_e1_port_hw(struct hfc_multi *hc, struct hm_map *m)
if (debug & DEBUG_HFCMULTI_INIT)
printk(KERN_DEBUG
--
2.47.0.229.g8f8d6eee53
Powered by blists - more mailing lists