[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <ZyyTm45HwJvrgnNu@shredder>
Date: Thu, 7 Nov 2024 12:16:59 +0200
From: Ido Schimmel <idosch@...sch.org>
To: Vladimir Vdovin <deliran@...dict.gg>
Cc: netdev@...r.kernel.org, dsahern@...nel.org, davem@...emloft.net,
edumazet@...gle.com, linux-kselftest@...r.kernel.org,
kuba@...nel.org, pabeni@...hat.com, shuah@...nel.org,
horms@...nel.org, gnault@...hat.com
Subject: Re: [PATCH net-next v9] net: ipv4: Cache pmtu for all packet paths
if multipath enabled
On Thu, Nov 07, 2024 at 09:36:24AM +0000, Vladimir Vdovin wrote:
> +test_pmtu_ipv4_mp_exceptions() {
> + setup namespaces routing multipath || return $ksft_skip
> +
> + trace "${ns_a}" veth_A-R1 "${ns_r1}" veth_R1-A \
> + "${ns_r1}" veth_R1-B "${ns_b}" veth_B-R1 \
> + "${ns_a}" veth_A-R2 "${ns_r2}" veth_R2-A \
> + "${ns_r2}" veth_R2-B "${ns_b}" veth_B-R2
> +
> + # Set up initial MTU values
> + mtu "${ns_a}" veth_A-R1 2000
> + mtu "${ns_r1}" veth_R1-A 2000
> + mtu "${ns_r1}" veth_R1-B 1500
> + mtu "${ns_b}" veth_B-R1 1500
> +
> + mtu "${ns_a}" veth_A-R2 2000
> + mtu "${ns_r2}" veth_R2-A 2000
> + mtu "${ns_r2}" veth_R2-B 1500
> + mtu "${ns_b}" veth_B-R2 1500
> +
> + fail=0
> +
> + # Ping and expect two nexthop exceptions for two routes in nh group
> + run_cmd ${ns_a} ping -q -M want -i 0.1 -c 1 -s 1800 "${host4_b_addr}"
> +
> + # Do route lookup before checking cached exceptions.
> + # The following commands are needed for dst entries to be cached
> + # in both paths exceptions and therefore dumped to user space
> + # Check that exceptions have been created with the correct PMTU
> + pmtu_a_R1="$(route_get_dst_pmtu_from_exception "${ns_a}" "${host4_b_addr}" oif veth_A-R1)"
> + pmtu_a_R2="$(route_get_dst_pmtu_from_exception "${ns_a}" "${host4_b_addr}" oif veth_A-R2)"
> +
In addition to the removal of 'fail=0' that you already mentioned, also
need to flip the error messages:
> + check_pmtu_value "1500" "${pmtu_a_R1}" "exceeding MTU (veth_A-R2)" || return 1
s/veth_A-R2/veth_A-R1/
> + check_pmtu_value "1500" "${pmtu_a_R2}" "exceeding MTU (veth_A-R1)" || return 1
s/veth_A-R1/veth_A-R2/
> +}
> +
> usage() {
> echo
> echo "$0 [OPTIONS] [TEST]..."
>
> base-commit: 66600fac7a984dea4ae095411f644770b2561ede
> --
> 2.43.5
>
Powered by blists - more mailing lists