| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20241107170255.1058124-2-maxime.chevallier@bootlin.com>
Date: Thu, 7 Nov 2024 18:02:48 +0100
From: Maxime Chevallier <maxime.chevallier@...tlin.com>
To: davem@...emloft.net,
Andrew Lunn <andrew@...n.ch>,
Jakub Kicinski <kuba@...nel.org>,
Eric Dumazet <edumazet@...gle.com>,
Paolo Abeni <pabeni@...hat.com>,
Russell King <linux@...linux.org.uk>,
Christophe Leroy <christophe.leroy@...roup.eu>,
Heiner Kallweit <hkallweit1@...il.com>
Cc: Maxime Chevallier <maxime.chevallier@...tlin.com>,
netdev@...r.kernel.org,
linux-kernel@...r.kernel.org,
thomas.petazzoni@...tlin.com,
Herve Codina <herve.codina@...tlin.com>,
Uwe Kleine-König <u.kleine-koenig@...libre.com>,
linuxppc-dev@...ts.ozlabs.org
Subject: [PATCH net-next 1/7] net: freescale: ucc_geth: Drop support for the "interface" DT property
In april 2007, ucc_geth was converted to phylib with :
commit 728de4c927a3 ("ucc_geth: migrate ucc_geth to phylib").
In that commit, the device-tree property "interface", that could be used to
retrieve the PHY interface mode was deprecated.
DTS files that still used that property were converted along the way, in
the following commit, also dating from april 2007 :
commit 0fd8c47cccb1 ("[POWERPC] Replace undocumented interface properties in dts files")
17 years later, there's no users of that property left and I hope it's
safe to say we can remove support from that in the ucc_geth driver,
making the probe() function a bit simpler.
Should there be any users that have a DT that was generated when 2.6.21 was
cutting-edge, print an error message with hints on how to convert the
devicetree if the 'interface' property is found.
With that property gone, we can greatly simplify the parsing of the
phy-interface-mode from the devicetree by using of_get_phy_mode(),
allowing the removal of the open-coded parsing in the driver.
Signed-off-by: Maxime Chevallier <maxime.chevallier@...tlin.com>
---
drivers/net/ethernet/freescale/ucc_geth.c | 63 +++++------------------
1 file changed, 12 insertions(+), 51 deletions(-)
diff --git a/drivers/net/ethernet/freescale/ucc_geth.c b/drivers/net/ethernet/freescale/ucc_geth.c
index 6663c1768089..80540c817c4e 100644
--- a/drivers/net/ethernet/freescale/ucc_geth.c
+++ b/drivers/net/ethernet/freescale/ucc_geth.c
@@ -3469,32 +3469,6 @@ static int ucc_geth_resume(struct platform_device *ofdev)
#define ucc_geth_resume NULL
#endif
-static phy_interface_t to_phy_interface(const char *phy_connection_type)
-{
- if (strcasecmp(phy_connection_type, "mii") == 0)
- return PHY_INTERFACE_MODE_MII;
- if (strcasecmp(phy_connection_type, "gmii") == 0)
- return PHY_INTERFACE_MODE_GMII;
- if (strcasecmp(phy_connection_type, "tbi") == 0)
- return PHY_INTERFACE_MODE_TBI;
- if (strcasecmp(phy_connection_type, "rmii") == 0)
- return PHY_INTERFACE_MODE_RMII;
- if (strcasecmp(phy_connection_type, "rgmii") == 0)
- return PHY_INTERFACE_MODE_RGMII;
- if (strcasecmp(phy_connection_type, "rgmii-id") == 0)
- return PHY_INTERFACE_MODE_RGMII_ID;
- if (strcasecmp(phy_connection_type, "rgmii-txid") == 0)
- return PHY_INTERFACE_MODE_RGMII_TXID;
- if (strcasecmp(phy_connection_type, "rgmii-rxid") == 0)
- return PHY_INTERFACE_MODE_RGMII_RXID;
- if (strcasecmp(phy_connection_type, "rtbi") == 0)
- return PHY_INTERFACE_MODE_RTBI;
- if (strcasecmp(phy_connection_type, "sgmii") == 0)
- return PHY_INTERFACE_MODE_SGMII;
-
- return PHY_INTERFACE_MODE_MII;
-}
-
static int ucc_geth_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
{
struct ucc_geth_private *ugeth = netdev_priv(dev);
@@ -3564,19 +3538,6 @@ static int ucc_geth_probe(struct platform_device* ofdev)
int err, ucc_num, max_speed = 0;
const unsigned int *prop;
phy_interface_t phy_interface;
- static const int enet_to_speed[] = {
- SPEED_10, SPEED_10, SPEED_10,
- SPEED_100, SPEED_100, SPEED_100,
- SPEED_1000, SPEED_1000, SPEED_1000, SPEED_1000,
- };
- static const phy_interface_t enet_to_phy_interface[] = {
- PHY_INTERFACE_MODE_MII, PHY_INTERFACE_MODE_RMII,
- PHY_INTERFACE_MODE_RGMII, PHY_INTERFACE_MODE_MII,
- PHY_INTERFACE_MODE_RMII, PHY_INTERFACE_MODE_RGMII,
- PHY_INTERFACE_MODE_GMII, PHY_INTERFACE_MODE_RGMII,
- PHY_INTERFACE_MODE_TBI, PHY_INTERFACE_MODE_RTBI,
- PHY_INTERFACE_MODE_SGMII,
- };
ugeth_vdbg("%s: IN", __func__);
@@ -3627,18 +3588,17 @@ static int ucc_geth_probe(struct platform_device* ofdev)
/* Find the TBI PHY node. If it's not there, we don't support SGMII */
ug_info->tbi_node = of_parse_phandle(np, "tbi-handle", 0);
- /* get the phy interface type, or default to MII */
- prop = of_get_property(np, "phy-connection-type", NULL);
- if (!prop) {
- /* handle interface property present in old trees */
- prop = of_get_property(ug_info->phy_node, "interface", NULL);
- if (prop != NULL) {
- phy_interface = enet_to_phy_interface[*prop];
- max_speed = enet_to_speed[*prop];
- } else
- phy_interface = PHY_INTERFACE_MODE_MII;
- } else {
- phy_interface = to_phy_interface((const char *)prop);
+ prop = of_get_property(ug_info->phy_node, "interface", NULL);
+ if (prop) {
+ dev_err(&ofdev->dev,
+ "Device-tree property 'interface' is no longer supported. Please use 'phy-connection-type' instead.");
+ goto err_put_tbi;
+ }
+
+ err = of_get_phy_mode(np, &phy_interface);
+ if (err) {
+ dev_err(&ofdev->dev, "Invalid phy-connection-type");
+ goto err_put_tbi;
}
/* get speed, or derive from PHY interface */
@@ -3746,6 +3706,7 @@ static int ucc_geth_probe(struct platform_device* ofdev)
err_deregister_fixed_link:
if (of_phy_is_fixed_link(np))
of_phy_deregister_fixed_link(np);
+err_put_tbi:
of_node_put(ug_info->tbi_node);
of_node_put(ug_info->phy_node);
return err;
--
2.47.0
Powered by blists - more mailing lists