lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <672cf752e2014_1f26762945a@willemb.c.googlers.com.notmuch>
Date: Thu, 07 Nov 2024 12:22:26 -0500
From: Willem de Bruijn <willemdebruijn.kernel@...il.com>
To: Anna Emese Nyiri <annaemesenyiri@...il.com>, 
 netdev@...r.kernel.org
Cc: fejes@....elte.hu, 
 annaemesenyiri@...il.com, 
 edumazet@...gle.com, 
 kuba@...nel.org, 
 pabeni@...hat.com, 
 willemdebruijn.kernel@...il.com, 
 Ido Schimmel <idosch@...sch.org>
Subject: Re: [PATCH net-next v3 3/3] selftest: net: test SO_PRIORITY ancillary
 data with cmsg_sender

Anna Emese Nyiri wrote:
> Extend cmsg_sender.c with a new option '-Q' to send SO_PRIORITY
> ancillary data.
> 
> Add the `cmsg_so_priority.sh` script, which sets up two network  
> namespaces (red and green) and uses the `cmsg_sender.c` program to  
> send messages between them. The script sets packet priorities both  
> via `setsockopt` and control messages (cmsg) and verifies whether  
> packets are routed to the same queue based on priority settings.

qdisc. queue is a more generic term, generally referring to hw queues.
 
> Suggested-by: Ido Schimmel <idosch@...sch.org>
> Signed-off-by: Anna Emese Nyiri <annaemesenyiri@...il.com>
> ---
>  tools/testing/selftests/net/cmsg_sender.c     |  11 +-
>  .../testing/selftests/net/cmsg_so_priority.sh | 115 ++++++++++++++++++
>  2 files changed, 125 insertions(+), 1 deletion(-)
>  create mode 100755 tools/testing/selftests/net/cmsg_so_priority.sh
 
> diff --git a/tools/testing/selftests/net/cmsg_so_priority.sh b/tools/testing/selftests/net/cmsg_so_priority.sh
> new file mode 100755
> index 000000000000..706d29b251e9
> --- /dev/null
> +++ b/tools/testing/selftests/net/cmsg_so_priority.sh
> @@ -0,0 +1,115 @@
> +#!/bin/bash

SPDX header

> +
> +source lib.sh
> +
> +IP4=192.168.0.2/16
> +TGT4=192.168.0.3/16
> +TGT4_NO_MASK=192.168.0.3
> +IP6=2001:db8::2/64
> +TGT6=2001:db8::3/64
> +TGT6_NO_MASK=2001:db8::3
> +IP4BR=192.168.0.1/16
> +IP6BR=2001:db8::1/64
> +PORT=8080
> +DELAY=400000
> +QUEUE_NUM=4
> +
> +
> +cleanup() {
> +    ip netns del red 2>/dev/null
> +    ip netns del green 2>/dev/null
> +    ip link del br0 2>/dev/null
> +    ip link del vethcab0 2>/dev/null
> +    ip link del vethcab1 2>/dev/null
> +}
> +
> +trap cleanup EXIT
> +
> +priority_values=($(seq 0 $((QUEUE_NUM - 1))))
> +
> +queue_config=""
> +for ((i=0; i<$QUEUE_NUM; i++)); do
> +    queue_config+=" 1@$i"
> +done
> +
> +map_config=$(seq 0 $((QUEUE_NUM - 1)) | tr '\n' ' ')
> +
> +ip netns add red
> +ip netns add green
> +ip link add br0 type bridge
> +ip link set br0 up

Is this bridge needed? Can this just use a veth pair as is.

More importantly, it would be great if we can deduplicate this kind of
setup boilerplate across similar tests as much as possible.

> +ip addr add $IP4BR dev br0
> +ip addr add $IP6BR dev br0
> +
> +ip link add vethcab0 type veth peer name red0
> +ip link set vethcab0 master br0
> +ip link set red0 netns red
> +ip netns exec red bash -c "
> +ip link set lo up
> +ip link set red0 up
> +ip addr add $IP4 dev red0
> +ip addr add $IP6 dev red0
> +sysctl -w net.ipv4.ping_group_range='0 2147483647'
> +exit"
> +ip link set vethcab0 up
> +
> +ip link add vethcab1 type veth peer name green0
> +ip link set vethcab1 master br0
> +ip link set green0 netns green
> +ip netns exec green bash -c "
> +ip link set lo up
> +ip link set green0 up
> +ip addr add $TGT4 dev green0
> +ip addr add $TGT6 dev green0
> +exit"
> +ip link set vethcab1 up
> +
> +ip netns exec red bash -c "
> +sudo ethtool -L red0 tx $QUEUE_NUM rx $QUEUE_NUM
> +sudo tc qdisc add dev red0 root mqprio num_tc $QUEUE_NUM queues $queue_config map $map_config hw 0
> +exit"
> +
> +get_queue_bytes() {
> +    ip netns exec red sudo tc -s qdisc show dev red0 | grep 'Sent' | awk '{print $2}'
> +}
> +
> +TOTAL_TESTS=0
> +FAILED_TESTS=0
> +
> +check_result() {
> +    ((TOTAL_TESTS++))
> +    if [ "$1" -ne 0 ]; then
> +        ((FAILED_TESTS++))
> +    fi
> +}
> +
> +
> +for i in 4 6; do
> +    [ $i == 4 ] && TGT=$TGT4_NO_MASK || TGT=$TGT6_NO_MASK
> +
> +    for p in u i r; do
> +        echo "Test IPV$i, prot: $p"
> +        for value in "${priority_values[@]}"; do
> +            ip netns exec red ./cmsg_sender -$i -Q $value -d "${DELAY}" -p $p $TGT $PORT
> +            setsockopt_priority_bytes_num=($(get_queue_bytes))
> +
> +            ip netns exec red ./cmsg_sender -$i -P $value -d "${DELAY}" -p $p $TGT $PORT
> +            cmsg_priority_bytes_num=($(get_queue_bytes))
> +
> +            if [[ "${cmsg_priority_bytes_num[$actual_queue]}" != \
> +            "${setsockopt_priority_bytes_num[$actual_queue]}" ]]; then
> +                check_result 0
> +            else
> +                check_result 1
> +            fi
> +        done
> +    done
> +done
> +
> +if [ $FAILED_TESTS -ne 0 ]; then
> +    echo "FAIL - $FAILED_TESTS/$TOTAL_TESTS tests failed"
> +    exit 1
> +else
> +    echo "OK - All $TOTAL_TESTS tests passed"
> +    exit 0
> +fi
> -- 
> 2.43.0
> 



Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ