netdev - [PATCH net-next v4 7/9] ice: reduce size of queue context fields

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20241108-packing-pack-fields-and-ice-implementation-v4-7-81a9f42c30e5@intel.com>
Date: Fri, 08 Nov 2024 17:30:20 -0800
From: Jacob Keller <jacob.e.keller@...el.com>
To: Vladimir Oltean <olteanv@...il.com>, 
 Andrew Morton <akpm@...ux-foundation.org>, 
 Eric Dumazet <edumazet@...gle.com>, Jakub Kicinski <kuba@...nel.org>, 
 Paolo Abeni <pabeni@...hat.com>, Tony Nguyen <anthony.l.nguyen@...el.com>, 
 Przemek Kitszel <przemyslaw.kitszel@...el.com>, 
 Masahiro Yamada <masahiroy@...nel.org>, netdev <netdev@...r.kernel.org>
Cc: linux-kbuild@...r.kernel.org, Jacob Keller <jacob.e.keller@...el.com>
Subject: [PATCH net-next v4 7/9] ice: reduce size of queue context fields

The ice_rlan_ctx and ice_tlan_ctx structures have some fields which are
intentionally sized larger necessary relative to the packed sizes the data
must fit into. This was done because the original ice_set_ctx() function
and its helpers did not correctly handle packing when the packed bits
straddled a byte. This is no longer the case with the use of the
<linux/packing.h> implementation.

Save some bytes in these structures by sizing the variables to the number
of bytes the actual bitpacked fields fit into.

There are a couple of gaps left in the structure, which is a result of the
fields being in the order they appear in the packed bit layout, but where
alignment forces some extra gaps. We could fix this, saving ~8 bytes from
each structure. However, these structures are not used heavily, and the
resulting savings is minimal:

$ bloat-o-meter ice-before-reorder.ko ice-after-reorder.ko
add/remove: 0/0 grow/shrink: 1/1 up/down: 26/-70 (-44)
Function                                     old     new   delta
ice_vsi_cfg_txq                             1873    1899     +26
ice_setup_rx_ctx.constprop                  1529    1459     -70
Total: Before=1459555, After=1459511, chg -0.00%

Thus, the fields are left in the same order as the packed bit layout,
despite the gaps this causes.

Signed-off-by: Jacob Keller <jacob.e.keller@...el.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@...el.com>
---
 drivers/net/ethernet/intel/ice/ice_lan_tx_rx.h | 32 ++++++++------------------
 1 file changed, 10 insertions(+), 22 deletions(-)

diff --git a/drivers/net/ethernet/intel/ice/ice_lan_tx_rx.h b/drivers/net/ethernet/intel/ice/ice_lan_tx_rx.h
index 31d4a445d640..1479b45738af 100644
--- a/drivers/net/ethernet/intel/ice/ice_lan_tx_rx.h
+++ b/drivers/net/ethernet/intel/ice/ice_lan_tx_rx.h
@@ -375,23 +375,17 @@ enum ice_rx_flex_desc_status_error_1_bits {
 #define ICE_TX_DRBELL_Q_CTX_SIZE_DWORDS	5
 #define GLTCLAN_CQ_CNTX(i, CQ)		(GLTCLAN_CQ_CNTX0(CQ) + ((i) * 0x0800))
 
-/* RLAN Rx queue context data
- *
- * The sizes of the variables may be larger than needed due to crossing byte
- * boundaries. If we do not have the width of the variable set to the correct
- * size then we could end up shifting bits off the top of the variable when the
- * variable is at the top of a byte and crosses over into the next byte.
- */
+/* RLAN Rx queue context data */
 struct ice_rlan_ctx {
 	u16 head;
-	u16 cpuid; /* bigger than needed, see above for reason */
+	u8 cpuid;
 #define ICE_RLAN_BASE_S 7
 	u64 base;
 	u16 qlen;
 #define ICE_RLAN_CTX_DBUF_S 7
-	u16 dbuf; /* bigger than needed, see above for reason */
+	u8 dbuf;
 #define ICE_RLAN_CTX_HBUF_S 6
-	u16 hbuf; /* bigger than needed, see above for reason */
+	u8 hbuf;
 	u8 dtype;
 	u8 dsize;
 	u8 crcstrip;
@@ -399,12 +393,12 @@ struct ice_rlan_ctx {
 	u8 hsplit_0;
 	u8 hsplit_1;
 	u8 showiv;
-	u32 rxmax; /* bigger than needed, see above for reason */
+	u16 rxmax;
 	u8 tphrdesc_ena;
 	u8 tphwdesc_ena;
 	u8 tphdata_ena;
 	u8 tphhead_ena;
-	u16 lrxqthresh; /* bigger than needed, see above for reason */
+	u8 lrxqthresh;
 	u8 prefena;	/* NOTE: normally must be set to 1 at init */
 };
 
@@ -535,18 +529,12 @@ enum ice_tx_ctx_desc_eipt_offload {
 #define ICE_LAN_TXQ_MAX_QGRPS	127
 #define ICE_LAN_TXQ_MAX_QDIS	1023
 
-/* Tx queue context data
- *
- * The sizes of the variables may be larger than needed due to crossing byte
- * boundaries. If we do not have the width of the variable set to the correct
- * size then we could end up shifting bits off the top of the variable when the
- * variable is at the top of a byte and crosses over into the next byte.
- */
+/* Tx queue context data */
 struct ice_tlan_ctx {
 #define ICE_TLAN_CTX_BASE_S	7
 	u64 base;		/* base is defined in 128-byte units */
 	u8 port_num;
-	u16 cgd_num;		/* bigger than needed, see above for reason */
+	u8 cgd_num;
 	u8 pf_num;
 	u16 vmvf_num;
 	u8 vmvf_type;
@@ -557,7 +545,7 @@ struct ice_tlan_ctx {
 	u8 tsyn_ena;
 	u8 internal_usage_flag;
 	u8 alt_vlan;
-	u16 cpuid;		/* bigger than needed, see above for reason */
+	u8 cpuid;
 	u8 wb_mode;
 	u8 tphrd_desc;
 	u8 tphrd;
@@ -566,7 +554,7 @@ struct ice_tlan_ctx {
 	u16 qnum_in_func;
 	u8 itr_notification_mode;
 	u8 adjust_prof_id;
-	u32 qlen;		/* bigger than needed, see above for reason */
+	u16 qlen;
 	u8 quanta_prof_idx;
 	u8 tso_ena;
 	u16 tso_qnum;

-- 
2.47.0.265.g4ca455297942