[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20241117102147.1688991-1-o.rempel@pengutronix.de>
Date: Sun, 17 Nov 2024 11:21:47 +0100
From: Oleksij Rempel <o.rempel@...gutronix.de>
To: "David S. Miller" <davem@...emloft.net>,
Andrew Lunn <andrew@...n.ch>,
Eric Dumazet <edumazet@...gle.com>,
Florian Fainelli <f.fainelli@...il.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>,
Woojung Huh <woojung.huh@...rochip.com>,
Arun Ramadoss <arun.ramadoss@...rochip.com>,
Heiner Kallweit <hkallweit1@...il.com>,
Russell King <linux@...linux.org.uk>,
Yuiko Oshino <yuiko.oshino@...rochip.com>
Cc: Oleksij Rempel <o.rempel@...gutronix.de>,
kernel@...gutronix.de,
linux-kernel@...r.kernel.org,
netdev@...r.kernel.org,
UNGLinuxDriver@...rochip.com,
Phil Elwell <phil@...pberrypi.org>
Subject: [PATCH net v1 1/1] net: phy: microchip: Reset LAN88xx PHY to ensure clean link state on LAN7800/7850
Fix outdated MII_LPA data in the LAN88xx PHY, which is used in LAN7800
and LAN7850 USB Ethernet controllers. Due to a hardware limitation, the
PHY cannot reliably update link status after parallel detection when the
link partner does not support auto-negotiation. To mitigate this, add a
PHY reset in `lan88xx_link_change_notify()` when `phydev->state` is
`PHY_NOLINK`, ensuring the PHY starts in a clean state and reports
accurate fixed link parallel detection results.
Fixes: 792aec47d59d9 ("add microchip LAN88xx phy driver")
Signed-off-by: Oleksij Rempel <o.rempel@...gutronix.de>
---
drivers/net/phy/microchip.c | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)
diff --git a/drivers/net/phy/microchip.c b/drivers/net/phy/microchip.c
index d3273bc0da4a..3c8bc87da70e 100644
--- a/drivers/net/phy/microchip.c
+++ b/drivers/net/phy/microchip.c
@@ -351,6 +351,21 @@ static int lan88xx_config_aneg(struct phy_device *phydev)
static void lan88xx_link_change_notify(struct phy_device *phydev)
{
int temp;
+ int ret;
+
+ /* Reset PHY, otherwise MII_LPA will provide outdated information.
+ * This issue is reproducible only with after parallel detection
+ * where link partner do not supports auto-negotiation.
+ */
+ if (phydev->state == PHY_NOLINK) {
+ ret = phy_init_hw(phydev);
+ if (ret < 0)
+ goto link_change_notify_failed;
+
+ ret = _phy_start_aneg(phydev);
+ if (ret < 0)
+ goto link_change_notify_failed;
+ }
/* At forced 100 F/H mode, chip may fail to set mode correctly
* when cable is switched between long(~50+m) and short one.
@@ -377,6 +392,11 @@ static void lan88xx_link_change_notify(struct phy_device *phydev)
temp |= LAN88XX_INT_MASK_MDINTPIN_EN_;
phy_write(phydev, LAN88XX_INT_MASK, temp);
}
+
+ return;
+
+link_change_notify_failed:
+ phydev_err(phydev, "Link change process failed %pe\n", ERR_PTR(ret));
}
/**
--
2.39.5
Powered by blists - more mailing lists