[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20241118-sparx5-lan969x-switch-driver-4-v3-5-3cefee5e7e3a@microchip.com>
Date: Mon, 18 Nov 2024 14:00:51 +0100
From: Daniel Machon <daniel.machon@...rochip.com>
To: <UNGLinuxDriver@...rochip.com>, Andrew Lunn <andrew+netdev@...n.ch>,
"David S. Miller" <davem@...emloft.net>, Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>, "Lars
Povlsen" <lars.povlsen@...rochip.com>, Steen Hegelund
<Steen.Hegelund@...rochip.com>, Horatiu Vultur
<horatiu.vultur@...rochip.com>, Russell King <linux@...linux.org.uk>,
<jacob.e.keller@...el.com>, <robh@...nel.org>, <krzk+dt@...nel.org>,
<conor+dt@...nel.org>
CC: <devicetree@...r.kernel.org>, <netdev@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, <linux-arm-kernel@...ts.infradead.org>
Subject: [PATCH net-next v3 5/8] net: sparx5: verify RGMII speeds
When doing a port config, we verify the port speed against the PHY mode
and supported speeds of that PHY mode.
Add checks for the four RGMII phy modes: RGMII, RGMII_ID, RGMII_TXID and
RGMII_RXID.
Reviewed-by: Steen Hegelund <Steen.Hegelund@...rochip.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@...rochip.com>
Signed-off-by: Daniel Machon <daniel.machon@...rochip.com>
---
drivers/net/ethernet/microchip/sparx5/sparx5_port.c | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/drivers/net/ethernet/microchip/sparx5/sparx5_port.c b/drivers/net/ethernet/microchip/sparx5/sparx5_port.c
index b494970752fd..9f0f687bd994 100644
--- a/drivers/net/ethernet/microchip/sparx5/sparx5_port.c
+++ b/drivers/net/ethernet/microchip/sparx5/sparx5_port.c
@@ -257,6 +257,15 @@ static int sparx5_port_verify_speed(struct sparx5 *sparx5,
conf->speed != SPEED_25000))
return sparx5_port_error(port, conf, SPX5_PERR_SPEED);
break;
+ case PHY_INTERFACE_MODE_RGMII:
+ case PHY_INTERFACE_MODE_RGMII_ID:
+ case PHY_INTERFACE_MODE_RGMII_TXID:
+ case PHY_INTERFACE_MODE_RGMII_RXID:
+ if (conf->speed != SPEED_1000 &&
+ conf->speed != SPEED_100 &&
+ conf->speed != SPEED_10)
+ return sparx5_port_error(port, conf, SPX5_PERR_SPEED);
+ break;
default:
return sparx5_port_error(port, conf, SPX5_PERR_IFTYPE);
}
--
2.34.1
Powered by blists - more mailing lists