netdev - Re: [PATCH net v4 4/4] rtase: Add defines for hardware version id

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <ZzytDBkUFWYjTTgU@localhost.localdomain>
Date: Tue, 19 Nov 2024 16:21:48 +0100
From: Michal Kubiak <michal.kubiak@...el.com>
To: Justin Lai <justinlai0215@...ltek.com>
CC: <kuba@...nel.org>, <davem@...emloft.net>, <edumazet@...gle.com>,
	<pabeni@...hat.com>, <andrew+netdev@...n.ch>, <linux-kernel@...r.kernel.org>,
	<netdev@...r.kernel.org>, <horms@...nel.org>, <pkshih@...ltek.com>,
	<larry.chiu@...ltek.com>
Subject: Re: [PATCH net v4 4/4] rtase: Add defines for hardware version id

On Tue, Nov 19, 2024 at 05:57:06PM +0800, Justin Lai wrote:
> Add defines for hardware version id.
> 
> Signed-off-by: Justin Lai <justinlai0215@...ltek.com>
> ---
>  drivers/net/ethernet/realtek/rtase/rtase.h      |  5 ++++-
>  drivers/net/ethernet/realtek/rtase/rtase_main.c | 12 ++++++------
>  2 files changed, 10 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/net/ethernet/realtek/rtase/rtase.h b/drivers/net/ethernet/realtek/rtase/rtase.h
> index 547c71937b01..4a4434869b10 100644
> --- a/drivers/net/ethernet/realtek/rtase/rtase.h
> +++ b/drivers/net/ethernet/realtek/rtase/rtase.h
> @@ -9,7 +9,10 @@
>  #ifndef RTASE_H
>  #define RTASE_H
>  
> -#define RTASE_HW_VER_MASK 0x7C800000
> +#define RTASE_HW_VER_MASK     0x7C800000
> +#define RTASE_HW_VER_906X_7XA 0x00800000
> +#define RTASE_HW_VER_906X_7XC 0x04000000
> +#define RTASE_HW_VER_907XD_V1 0x04800000
>  
>  #define RTASE_RX_DMA_BURST_256       4
>  #define RTASE_TX_DMA_BURST_UNLIMITED 7
> diff --git a/drivers/net/ethernet/realtek/rtase/rtase_main.c b/drivers/net/ethernet/realtek/rtase/rtase_main.c
> index 26331a2b7b2d..1bfe5ef40c52 100644
> --- a/drivers/net/ethernet/realtek/rtase/rtase_main.c
> +++ b/drivers/net/ethernet/realtek/rtase/rtase_main.c
> @@ -1720,11 +1720,11 @@ static int rtase_get_settings(struct net_device *dev,
>  						supported);
>  
>  	switch (tp->hw_ver) {
> -	case 0x00800000:
> -	case 0x04000000:
> +	case RTASE_HW_VER_906X_7XA:
> +	case RTASE_HW_VER_906X_7XC:
>  		cmd->base.speed = SPEED_5000;
>  		break;
> -	case 0x04800000:
> +	case RTASE_HW_VER_907XD_V1:
>  		cmd->base.speed = SPEED_10000;
>  		break;
>  	}


This is new code added in the patch #2.
I understand that you want to have those preprocessor definitions in a
separate patch, but why does this patch have to be the last one?
If you had included this change before the patch #2, you would be able
to send the final version of the above code (with no intermediate
changes).

Thanks,
Michal