[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <E1tFv49-005yiX-Hw@rmk-PC.armlinux.org.uk>
Date: Tue, 26 Nov 2024 12:53:17 +0000
From: "Russell King (Oracle)" <rmk+kernel@...linux.org.uk>
To: Andrew Lunn <andrew@...n.ch>,
Heiner Kallweit <hkallweit1@...il.com>
Cc: Alexandre Torgue <alexandre.torgue@...s.st.com>,
Andrew Lunn <andrew+netdev@...n.ch>,
Bryan Whitehead <bryan.whitehead@...rochip.com>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Florian Fainelli <florian.fainelli@...adcom.com>,
Jakub Kicinski <kuba@...nel.org>,
Jose Abreu <joabreu@...opsys.com>,
linux-arm-kernel@...ts.infradead.org,
linux-stm32@...md-mailman.stormreply.com,
Marcin Wojtas <marcin.s.wojtas@...il.com>,
Maxime Coquelin <mcoquelin.stm32@...il.com>,
netdev@...r.kernel.org,
Oleksij Rempel <o.rempel@...gutronix.de>,
Paolo Abeni <pabeni@...hat.com>,
UNGLinuxDriver@...rochip.com
Subject: [PATCH RFC net-next 13/23] net: mvneta: only allow EEE to be used in
"SGMII" modes
The Armada 388 manual states that EEE is only supported in "SGMII"
modes. As mvneta only supports serdes modes and RGMII, we can
satisfy this by excluding it for RGMII.
Signed-off-by: Russell King <rmk+kernel@...linux.org.uk>
---
drivers/net/ethernet/marvell/mvneta.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c
index 976ce8d6dabf..01bedf0a55f6 100644
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -5551,7 +5551,9 @@ static int mvneta_probe(struct platform_device *pdev)
pp->phylink_config.mac_capabilities = MAC_SYM_PAUSE | MAC_10 |
MAC_100 | MAC_1000FD | MAC_2500FD;
- /* Setup EEE. Choose 250us idle. */
+ /* Setup EEE. Choose 250us idle. Only supported in SGMII modes. */
+ __set_bit(PHY_INTERFACE_MODE_QSGMII, pp->phylink_config.lpi_interfaces);
+ __set_bit(PHY_INTERFACE_MODE_SGMII, pp->phylink_config.lpi_interfaces);
pp->phylink_config.lpi_capabilities = MAC_100FD | MAC_1000FD;
pp->phylink_config.lpi_timer_limit_us = 255;
pp->phylink_config.lpi_timer_default = 250;
--
2.30.2
Powered by blists - more mailing lists