[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <E1tFv4Z-005yj8-3U@rmk-PC.armlinux.org.uk>
Date: Tue, 26 Nov 2024 12:53:43 +0000
From: "Russell King (Oracle)" <rmk+kernel@...linux.org.uk>
To: Andrew Lunn <andrew@...n.ch>,
Heiner Kallweit <hkallweit1@...il.com>
Cc: Alexandre Torgue <alexandre.torgue@...s.st.com>,
Andrew Lunn <andrew+netdev@...n.ch>,
Bryan Whitehead <bryan.whitehead@...rochip.com>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Florian Fainelli <florian.fainelli@...adcom.com>,
Jakub Kicinski <kuba@...nel.org>,
Jose Abreu <joabreu@...opsys.com>,
linux-arm-kernel@...ts.infradead.org,
linux-stm32@...md-mailman.stormreply.com,
Marcin Wojtas <marcin.s.wojtas@...il.com>,
Maxime Coquelin <mcoquelin.stm32@...il.com>,
netdev@...r.kernel.org,
Oleksij Rempel <o.rempel@...gutronix.de>,
Paolo Abeni <pabeni@...hat.com>,
UNGLinuxDriver@...rochip.com
Subject: [PATCH RFC net-next 18/23] net: stmmac: make EEE depend on
phy->enable_tx_lpi
Make stmmac EEE depend on phylib's evaluation of user settings and PHY
negotiation, as indicated by phy->enable_tx_lpi. This will ensure when
phylib has evaluated that the user has disabled LPI, phy_init_eee()
will not be called, and priv->eee_active will be false, causing LPI/EEE
to be disabled.
Signed-off-by: Russell King (Oracle) <rmk+kernel@...linux.org.uk>
---
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 61d85281d75b..8bdf8bc9a728 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -1084,7 +1084,7 @@ static void stmmac_mac_link_up(struct phylink_config *config,
stmmac_mac_set(priv, priv->ioaddr, true);
if (phy && priv->dma_cap.eee) {
- priv->eee_active =
+ priv->eee_active = phy->enable_tx_lpi &&
phy_init_eee(phy, !(priv->plat->flags &
STMMAC_FLAG_RX_CLK_RUNS_IN_LPI)) >= 0;
priv->eee_enabled = stmmac_eee_init(priv);
--
2.30.2
Powered by blists - more mailing lists