[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <E1tFv4t-005yjW-IY@rmk-PC.armlinux.org.uk>
Date: Tue, 26 Nov 2024 12:54:03 +0000
From: "Russell King (Oracle)" <rmk+kernel@...linux.org.uk>
To: Andrew Lunn <andrew@...n.ch>,
Heiner Kallweit <hkallweit1@...il.com>
Cc: Alexandre Torgue <alexandre.torgue@...s.st.com>,
Andrew Lunn <andrew+netdev@...n.ch>,
Bryan Whitehead <bryan.whitehead@...rochip.com>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Florian Fainelli <florian.fainelli@...adcom.com>,
Jakub Kicinski <kuba@...nel.org>,
Jose Abreu <joabreu@...opsys.com>,
linux-arm-kernel@...ts.infradead.org,
linux-stm32@...md-mailman.stormreply.com,
Marcin Wojtas <marcin.s.wojtas@...il.com>,
Maxime Coquelin <mcoquelin.stm32@...il.com>,
netdev@...r.kernel.org,
Oleksij Rempel <o.rempel@...gutronix.de>,
Paolo Abeni <pabeni@...hat.com>,
UNGLinuxDriver@...rochip.com
Subject: [PATCH RFC net-next 22/23] net: stmmac: convert to use
phy_eee_rx_clock_stop()
Convert stmmac to use phy_eee_rx_clock_stop() to set the PHY receive
clock stop in LPI setting, rather than calling the legacy
phy_init_eee() function.
Signed-off-by: Russell King (Oracle) <rmk+kernel@...linux.org.uk>
---
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 7924808fec08..66a43a9aa469 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -1083,9 +1083,9 @@ static void stmmac_mac_link_up(struct phylink_config *config,
stmmac_mac_set(priv, priv->ioaddr, true);
if (phy && priv->dma_cap.eee) {
- priv->eee_active = phy->enable_tx_lpi &&
- phy_init_eee(phy, !(priv->plat->flags &
- STMMAC_FLAG_RX_CLK_RUNS_IN_LPI)) >= 0;
+ phy_eee_rx_clock_stop(phy, !(priv->plat->flags &
+ STMMAC_FLAG_RX_CLK_RUNS_IN_LPI));
+ priv->eee_active = phy->enable_tx_lpi;
priv->eee_enabled = stmmac_eee_init(priv);
priv->tx_lpi_timer = phy->eee_cfg.tx_lpi_timer;
stmmac_set_eee_pls(priv, priv->hw, true);
--
2.30.2
Powered by blists - more mailing lists