[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <E1tFroR-005xQE-Ab@rmk-PC.armlinux.org.uk>
Date: Tue, 26 Nov 2024 09:24:51 +0000
From: "Russell King (Oracle)" <rmk+kernel@...linux.org.uk>
To: Andrew Lunn <andrew@...n.ch>,
Heiner Kallweit <hkallweit1@...il.com>
Cc: Alexander Couzens <lynxis@...0.eu>,
Andrew Lunn <andrew+netdev@...n.ch>,
AngeloGioacchino Del Regno <angelogioacchino.delregno@...labora.com>,
Broadcom internal kernel review list <bcm-kernel-feedback-list@...adcom.com>,
Daniel Golle <daniel@...rotopia.org>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Florian Fainelli <florian.fainelli@...adcom.com>,
Ioana Ciornei <ioana.ciornei@....com>,
Jakub Kicinski <kuba@...nel.org>,
Jose Abreu <Jose.Abreu@...opsys.com>,
linux-arm-kernel@...ts.infradead.org,
linux-mediatek@...ts.infradead.org,
Marcin Wojtas <marcin.s.wojtas@...il.com>,
Matthias Brugger <matthias.bgg@...il.com>,
netdev@...r.kernel.org,
Paolo Abeni <pabeni@...hat.com>
Subject: [PATCH RFC net-next 07/16] net: phy: add phy_config_inband()
Add a method to configure the PHY's in-band mode.
Signed-off-by: Russell King (Oracle) <rmk+kernel@...linux.org.uk>
---
drivers/net/phy/phy.c | 31 +++++++++++++++++++++++++++++++
include/linux/phy.h | 6 ++++++
2 files changed, 37 insertions(+)
diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index d7b34f8ae415..3e4922839895 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -1026,6 +1026,37 @@ unsigned int phy_inband_caps(struct phy_device *phydev,
}
EXPORT_SYMBOL_GPL(phy_inband_caps);
+/**
+ * phy_config_inband - configure the desired PHY in-band mode
+ * @phydev: the phy_device struct
+ * @modes: in-band modes to configure
+ *
+ * Description: disables, enables or enables-with-bypass in-band signalling
+ * between the PHY and host system.
+ *
+ * Returns: zero on success, or negative errno value.
+ */
+int phy_config_inband(struct phy_device *phydev, unsigned int modes)
+{
+ int err;
+
+ if (!!(modes & LINK_INBAND_DISABLE) +
+ !!(modes & LINK_INBAND_ENABLE) +
+ !!(modes & LINK_INBAND_BYPASS) != 1)
+ return -EINVAL;
+
+ mutex_lock(&phydev->lock);
+ if (!phydev->drv)
+ err = -EIO;
+ else if (!phydev->drv->config_inband)
+ err = -EOPNOTSUPP;
+ else
+ err = phydev->drv->config_inband(phydev, modes);
+ mutex_unlock(&phydev->lock);
+
+ return err;
+}
+
/**
* _phy_start_aneg - start auto-negotiation for this PHY device
* @phydev: the phy_device struct
diff --git a/include/linux/phy.h b/include/linux/phy.h
index ff60c4785e11..6c1887d1edbf 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -980,6 +980,11 @@ struct phy_driver {
unsigned int (*inband_caps)(struct phy_device *phydev,
phy_interface_t interface);
+ /**
+ * @config_inband: configure in-band mode for the PHY
+ */
+ int (*config_inband)(struct phy_device *phydev, unsigned int modes);
+
/**
* @get_rate_matching: Get the supported type of rate matching for a
* particular phy interface. This is used by phy consumers to determine
@@ -1844,6 +1849,7 @@ int phy_start_aneg(struct phy_device *phydev);
int phy_aneg_done(struct phy_device *phydev);
unsigned int phy_inband_caps(struct phy_device *phydev,
phy_interface_t interface);
+int phy_config_inband(struct phy_device *phydev, unsigned int modes);
int phy_speed_down(struct phy_device *phydev, bool sync);
int phy_speed_up(struct phy_device *phydev);
bool phy_check_valid(int speed, int duplex, unsigned long *features);
--
2.30.2
Powered by blists - more mailing lists