netdev - Re: [PATCH] net: phy: phy_ethtool_ksettings

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <73ca1492-d97b-4120-b662-cc80fc787ffd@cogentembedded.com>
Date: Mon, 2 Dec 2024 14:20:17 +0500
From: Nikita Yushchenko <nikita.yoush@...entembedded.com>
To: Maxime Chevallier <maxime.chevallier@...tlin.com>
Cc: Andrew Lunn <andrew@...n.ch>, Heiner Kallweit <hkallweit1@...il.com>,
 Russell King <linux@...linux.org.uk>, "David S. Miller"
 <davem@...emloft.net>, Eric Dumazet <edumazet@...gle.com>,
 Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>,
 netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
 Michael Dege <michael.dege@...esas.com>,
 Christian Mardmoeller <christian.mardmoeller@...esas.com>,
 Dennis Ostermann <dennis.ostermann@...esas.com>
Subject: Re: [PATCH] net: phy: phy_ethtool_ksettings_set: Allow any supported
 speed

Hello.

> What's your use-case to need >1G fixed-settings link ?

My hardware is Renesas VC4 board (based on Renesas S4 SoC), network driver is rswitch, PHY in question 
is Marvell 88Q3344 (2.5G Base-T1).

To get two such PHYs talk to each other, one of the two has to be manually configured as slave.
(e.g. ethtool -s tsn0 master-slave forced-slave).

This gets handled via driver's ethtool set_link_ksettings method, which is currently set to
phy_ethtool_ksettings_set().

Writing a custom set_link_ksettings method just to not error out when speed is 2500 looks ugly.

Nikita