| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20241204072427.17778-3-ansuelsmth@gmail.com>
Date: Wed, 4 Dec 2024 08:24:09 +0100
From: Christian Marangi <ansuelsmth@...il.com>
To: Christian Marangi <ansuelsmth@...il.com>,
Andrew Lunn <andrew@...n.ch>,
Florian Fainelli <f.fainelli@...il.com>,
Vladimir Oltean <olteanv@...il.com>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>,
Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
Heiner Kallweit <hkallweit1@...il.com>,
Russell King <linux@...linux.org.uk>,
Matthias Brugger <matthias.bgg@...il.com>,
AngeloGioacchino Del Regno <angelogioacchino.delregno@...labora.com>,
linux-arm-kernel@...ts.infradead.org,
linux-mediatek@...ts.infradead.org,
netdev@...r.kernel.org,
devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org,
upstream@...oha.com
Subject: [net-next PATCH v8 2/4] dt-bindings: net: dsa: Add Airoha AN8855 Gigabit Switch documentation
Add Airoha AN8855 5 port Gigabit Switch documentation.
The switch node requires an additional mdio node to describe each internal
PHY absolute address on the bus.
Calibration values might be stored in switch EFUSE and internal PHY
might need to be calibrated, in such case, airoha,ext-surge needs to be
enabled and relative NVMEM cells needs to be defined in nvmem-layout
node.
Signed-off-by: Christian Marangi <ansuelsmth@...il.com>
Reviewed-by: Rob Herring (Arm) <robh@...nel.org>
---
.../bindings/net/dsa/airoha,an8855.yaml | 242 ++++++++++++++++++
1 file changed, 242 insertions(+)
create mode 100644 Documentation/devicetree/bindings/net/dsa/airoha,an8855.yaml
diff --git a/Documentation/devicetree/bindings/net/dsa/airoha,an8855.yaml b/Documentation/devicetree/bindings/net/dsa/airoha,an8855.yaml
new file mode 100644
index 000000000000..8ea2fadbab85
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/dsa/airoha,an8855.yaml
@@ -0,0 +1,242 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/dsa/airoha,an8855.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Airoha AN8855 Gigabit switch
+
+maintainers:
+ - Christian Marangi <ansuelsmth@...il.com>
+
+description: >
+ Airoha AN8855 is a 5-port Gigabit Switch.
+
+ The switch node requires an additional mdio node to describe each internal
+ PHY relative offset as the PHY address for the switch match the one for
+ the PHY ports. On top of internal PHY address, the switch base PHY address
+ is added.
+
+ Also the switch base PHY address can be configured and changed after the
+ first initialization. On reset, the switch PHY address is ALWAYS 1.
+
+properties:
+ compatible:
+ const: airoha,an8855
+
+ reg:
+ maxItems: 1
+
+ reset-gpios:
+ description:
+ GPIO to be used to reset the whole device
+ maxItems: 1
+
+ airoha,ext-surge:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ Calibrate the internal PHY with the calibration values stored in EFUSE
+ for the r50Ohm values.
+
+ '#nvmem-cell-cells':
+ const: 0
+
+ nvmem-layout:
+ $ref: /schemas/nvmem/layouts/nvmem-layout.yaml
+ description:
+ NVMEM Layout for exposed EFUSE. (for example to propagate calibration
+ value for r50Ohm for internal PHYs)
+
+ mdio:
+ $ref: /schemas/net/mdio.yaml#
+ unevaluatedProperties: false
+ description:
+ Define the absolute address of the internal PHY for each port.
+
+$ref: dsa.yaml#
+
+required:
+ - compatible
+ - reg
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ switch@1 {
+ compatible = "airoha,an8855";
+ reg = <1>;
+ reset-gpios = <&pio 39 0>;
+
+ airoha,ext-surge;
+
+ #nvmem-cell-cells = <0>;
+
+ nvmem-layout {
+ compatible = "fixed-layout";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ shift_sel_port0_tx_a: shift-sel-port0-tx-a@c {
+ reg = <0xc 0x4>;
+ };
+
+ shift_sel_port0_tx_b: shift-sel-port0-tx-b@10 {
+ reg = <0x10 0x4>;
+ };
+
+ shift_sel_port0_tx_c: shift-sel-port0-tx-c@14 {
+ reg = <0x14 0x4>;
+ };
+
+ shift_sel_port0_tx_d: shift-sel-port0-tx-d@18 {
+ reg = <0x18 0x4>;
+ };
+
+ shift_sel_port1_tx_a: shift-sel-port1-tx-a@1c {
+ reg = <0x1c 0x4>;
+ };
+
+ shift_sel_port1_tx_b: shift-sel-port1-tx-b@20 {
+ reg = <0x20 0x4>;
+ };
+
+ shift_sel_port1_tx_c: shift-sel-port1-tx-c@24 {
+ reg = <0x24 0x4>;
+ };
+
+ shift_sel_port1_tx_d: shift-sel-port1-tx-d@28 {
+ reg = <0x28 0x4>;
+ };
+
+ shift_sel_port2_tx_a: shift-sel-port2-tx-a@2c {
+ reg = <0x2c 0x4>;
+ };
+
+ shift_sel_port2_tx_b: shift-sel-port2-tx-b@30 {
+ reg = <0x30 0x4>;
+ };
+
+ shift_sel_port2_tx_c: shift-sel-port2-tx-c@34 {
+ reg = <0x34 0x4>;
+ };
+
+ shift_sel_port2_tx_d: shift-sel-port2-tx-d@38 {
+ reg = <0x38 0x4>;
+ };
+
+ shift_sel_port3_tx_a: shift-sel-port3-tx-a@4c {
+ reg = <0x4c 0x4>;
+ };
+
+ shift_sel_port3_tx_b: shift-sel-port3-tx-b@50 {
+ reg = <0x50 0x4>;
+ };
+
+ shift_sel_port3_tx_c: shift-sel-port3-tx-c@54 {
+ reg = <0x54 0x4>;
+ };
+
+ shift_sel_port3_tx_d: shift-sel-port3-tx-d@58 {
+ reg = <0x58 0x4>;
+ };
+ };
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ label = "lan1";
+ phy-mode = "internal";
+ phy-handle = <&internal_phy1>;
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "lan2";
+ phy-mode = "internal";
+ phy-handle = <&internal_phy2>;
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "lan3";
+ phy-mode = "internal";
+ phy-handle = <&internal_phy3>;
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "lan4";
+ phy-mode = "internal";
+ phy-handle = <&internal_phy4>;
+ };
+
+ port@5 {
+ reg = <5>;
+ label = "cpu";
+ ethernet = <&gmac0>;
+ phy-mode = "2500base-x";
+
+ fixed-link {
+ speed = <2500>;
+ full-duplex;
+ pause;
+ };
+ };
+ };
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ internal_phy1: phy@1 {
+ reg = <1>;
+
+ nvmem-cells = <&shift_sel_port0_tx_a>,
+ <&shift_sel_port0_tx_b>,
+ <&shift_sel_port0_tx_c>,
+ <&shift_sel_port0_tx_d>;
+ nvmem-cell-names = "tx_a", "tx_b", "tx_c", "tx_d";
+ };
+
+ internal_phy2: phy@2 {
+ reg = <2>;
+
+ nvmem-cells = <&shift_sel_port1_tx_a>,
+ <&shift_sel_port1_tx_b>,
+ <&shift_sel_port1_tx_c>,
+ <&shift_sel_port1_tx_d>;
+ nvmem-cell-names = "tx_a", "tx_b", "tx_c", "tx_d";
+ };
+
+ internal_phy3: phy@3 {
+ reg = <3>;
+
+ nvmem-cells = <&shift_sel_port2_tx_a>,
+ <&shift_sel_port2_tx_b>,
+ <&shift_sel_port2_tx_c>,
+ <&shift_sel_port2_tx_d>;
+ nvmem-cell-names = "tx_a", "tx_b", "tx_c", "tx_d";
+ };
+
+ internal_phy4: phy@4 {
+ reg = <4>;
+
+ nvmem-cells = <&shift_sel_port3_tx_a>,
+ <&shift_sel_port3_tx_b>,
+ <&shift_sel_port3_tx_c>,
+ <&shift_sel_port3_tx_d>;
+ nvmem-cell-names = "tx_a", "tx_b", "tx_c", "tx_d";
+ };
+ };
+ };
+ };
--
2.45.2
Powered by blists - more mailing lists