[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <06886be4-5f35-4785-bc63-a5c84887adfb@ti.com>
Date: Thu, 19 Dec 2024 14:49:55 +0530
From: MD Danish Anwar <danishanwar@...com>
To: Michal Swiatkowski <michal.swiatkowski@...ux.intel.com>
CC: <aleksander.lobakin@...el.com>, <lukma@...x.de>, <m-malladi@...com>,
<diogo.ivo@...mens.com>, <rdunlap@...radead.org>,
<schnelle@...ux.ibm.com>, <vladimir.oltean@....com>,
<horms@...nel.org>, <rogerq@...nel.org>, <pabeni@...hat.com>,
<kuba@...nel.org>, <edumazet@...gle.com>, <davem@...emloft.net>,
<andrew+netdev@...n.ch>, <linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>, <netdev@...r.kernel.org>, <srk@...com>,
Vignesh Raghavendra <vigneshr@...com>
Subject: Re: [PATCH net-next 2/4] net: ti: icssg-prueth: Add VLAN support in
EMAC mode
On 19/12/24 12:32 pm, Michal Swiatkowski wrote:
> On Mon, Dec 16, 2024 at 03:30:42PM +0530, MD Danish Anwar wrote:
>> Add support for vlan filtering in dual EMAC mode.
>>
>> Signed-off-by: MD Danish Anwar <danishanwar@...com>
>> ---
>> drivers/net/ethernet/ti/icssg/icssg_prueth.c | 29 +++++++++-----------
>> 1 file changed, 13 insertions(+), 16 deletions(-)
>>
>> diff --git a/drivers/net/ethernet/ti/icssg/icssg_prueth.c b/drivers/net/ethernet/ti/icssg/icssg_prueth.c
>> index c568c84a032b..e031bccf31dc 100644
>> --- a/drivers/net/ethernet/ti/icssg/icssg_prueth.c
>> +++ b/drivers/net/ethernet/ti/icssg/icssg_prueth.c
>> @@ -822,19 +822,18 @@ static int emac_ndo_vlan_rx_add_vid(struct net_device *ndev,
>> {
>> struct prueth_emac *emac = netdev_priv(ndev);
>> struct prueth *prueth = emac->prueth;
>> + int port_mask = BIT(emac->port_id);
>> int untag_mask = 0;
>> - int port_mask;
>>
>> - if (prueth->is_hsr_offload_mode) {
>> - port_mask = BIT(PRUETH_PORT_HOST) | BIT(emac->port_id);
>> - untag_mask = 0;
>> + if (prueth->is_hsr_offload_mode)
>> + port_mask |= BIT(PRUETH_PORT_HOST);
>>
>> - netdev_dbg(emac->ndev, "VID add vid:%u port_mask:%X untag_mask %X\n",
>> - vid, port_mask, untag_mask);
>> + netdev_err(emac->ndev, "VID add vid:%u port_mask:%X untag_mask %X\n",
>> + vid, port_mask, untag_mask);
>> +
>> + icssg_vtbl_modify(emac, vid, port_mask, untag_mask, true);
>> + icssg_set_pvid(emac->prueth, vid, emac->port_id);
>>
>> - icssg_vtbl_modify(emac, vid, port_mask, untag_mask, true);
>> - icssg_set_pvid(emac->prueth, vid, emac->port_id);
>> - }
>> return 0;
>> }
>>
>> @@ -843,18 +842,16 @@ static int emac_ndo_vlan_rx_del_vid(struct net_device *ndev,
>> {
>> struct prueth_emac *emac = netdev_priv(ndev);
>> struct prueth *prueth = emac->prueth;
>> + int port_mask = BIT(emac->port_id);
>> int untag_mask = 0;
>> - int port_mask;
>>
>> - if (prueth->is_hsr_offload_mode) {
>> + if (prueth->is_hsr_offload_mode)
>> port_mask = BIT(PRUETH_PORT_HOST);
>> - untag_mask = 0;
>>
>> - netdev_dbg(emac->ndev, "VID del vid:%u port_mask:%X untag_mask %X\n",
>> - vid, port_mask, untag_mask);
>> + netdev_err(emac->ndev, "VID del vid:%u port_mask:%X untag_mask %X\n",
>> + vid, port_mask, untag_mask);
> Why error? It doesn't look like error path, previously there was
> netdev_dbg (made more sense in my opinion)
>
My bad. It should be netdev_dbg(). I'll change it in v2. Thanks
>> + icssg_vtbl_modify(emac, vid, port_mask, untag_mask, false);
>>
>> - icssg_vtbl_modify(emac, vid, port_mask, untag_mask, false);
>> - }
>> return 0;
>> }
>>
>> --
>> 2.34.1
--
Thanks and Regards,
Danish
Powered by blists - more mailing lists