| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20241219175841.1094544-10-tariqt@nvidia.com>
Date: Thu, 19 Dec 2024 19:58:39 +0200
From: Tariq Toukan <tariqt@...dia.com>
To: "David S. Miller" <davem@...emloft.net>, Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>, Eric Dumazet <edumazet@...gle.com>, "Andrew
Lunn" <andrew+netdev@...n.ch>
CC: <netdev@...r.kernel.org>, Saeed Mahameed <saeedm@...dia.com>, Gal Pressman
<gal@...dia.com>, Leon Romanovsky <leonro@...dia.com>, Mark Bloch
<mbloch@...dia.com>, Przemek Kitszel <przemyslaw.kitszel@...el.com>, "Itamar
Gozlan" <igozlan@...dia.com>, Yevgeny Kliteynik <kliteyn@...dia.com>, "Tariq
Toukan" <tariqt@...dia.com>
Subject: [PATCH net-next V4 09/11] net/mlx5: DR, add support for ConnectX-8 steering
From: Itamar Gozlan <igozlan@...dia.com>
Add support for a new steering format version that is implemented by
ConnectX-8.
Except for several differences, the STEv3 is identical to STEv2, so
for most callbacks STEv3 context struct will call STEv2 functions.
Signed-off-by: Itamar Gozlan <igozlan@...dia.com>
Signed-off-by: Yevgeny Kliteynik <kliteyn@...dia.com>
Signed-off-by: Tariq Toukan <tariqt@...dia.com>
---
.../net/ethernet/mellanox/mlx5/core/Makefile | 1 +
.../mlx5/core/steering/sws/dr_domain.c | 2 +-
.../mellanox/mlx5/core/steering/sws/dr_ste.c | 2 +
.../mellanox/mlx5/core/steering/sws/dr_ste.h | 1 +
.../mlx5/core/steering/sws/dr_ste_v3.c | 221 ++++++++++++++++++
.../mlx5/core/steering/sws/mlx5_ifc_dr.h | 40 ++++
.../mellanox/mlx5/core/steering/sws/mlx5dr.h | 2 +-
7 files changed, 267 insertions(+), 2 deletions(-)
create mode 100644 drivers/net/ethernet/mellanox/mlx5/core/steering/sws/dr_ste_v3.c
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/Makefile b/drivers/net/ethernet/mellanox/mlx5/core/Makefile
index 79fe09de0a9f..10a763e668ed 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/Makefile
+++ b/drivers/net/ethernet/mellanox/mlx5/core/Makefile
@@ -123,6 +123,7 @@ mlx5_core-$(CONFIG_MLX5_SW_STEERING) += steering/sws/dr_domain.o \
steering/sws/dr_ste_v0.o \
steering/sws/dr_ste_v1.o \
steering/sws/dr_ste_v2.o \
+ steering/sws/dr_ste_v3.o \
steering/sws/dr_cmd.o \
steering/sws/dr_fw.o \
steering/sws/dr_action.o \
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/steering/sws/dr_domain.c b/drivers/net/ethernet/mellanox/mlx5/core/steering/sws/dr_domain.c
index 49f22cad92bf..60cb4527588a 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/steering/sws/dr_domain.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/steering/sws/dr_domain.c
@@ -8,7 +8,7 @@
#define DR_DOMAIN_SW_STEERING_SUPPORTED(dmn, dmn_type) \
((dmn)->info.caps.dmn_type##_sw_owner || \
((dmn)->info.caps.dmn_type##_sw_owner_v2 && \
- (dmn)->info.caps.sw_format_ver <= MLX5_STEERING_FORMAT_CONNECTX_7))
+ (dmn)->info.caps.sw_format_ver <= MLX5_STEERING_FORMAT_CONNECTX_8))
bool mlx5dr_domain_is_support_ptrn_arg(struct mlx5dr_domain *dmn)
{
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/steering/sws/dr_ste.c b/drivers/net/ethernet/mellanox/mlx5/core/steering/sws/dr_ste.c
index 01ba8eae2983..c8b8ff80c7c7 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/steering/sws/dr_ste.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/steering/sws/dr_ste.c
@@ -1458,6 +1458,8 @@ struct mlx5dr_ste_ctx *mlx5dr_ste_get_ctx(u8 version)
return mlx5dr_ste_get_ctx_v1();
else if (version == MLX5_STEERING_FORMAT_CONNECTX_7)
return mlx5dr_ste_get_ctx_v2();
+ else if (version == MLX5_STEERING_FORMAT_CONNECTX_8)
+ return mlx5dr_ste_get_ctx_v3();
return NULL;
}
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/steering/sws/dr_ste.h b/drivers/net/ethernet/mellanox/mlx5/core/steering/sws/dr_ste.h
index b6ec8d30d990..5f409dc30aca 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/steering/sws/dr_ste.h
+++ b/drivers/net/ethernet/mellanox/mlx5/core/steering/sws/dr_ste.h
@@ -217,5 +217,6 @@ struct mlx5dr_ste_ctx {
struct mlx5dr_ste_ctx *mlx5dr_ste_get_ctx_v0(void);
struct mlx5dr_ste_ctx *mlx5dr_ste_get_ctx_v1(void);
struct mlx5dr_ste_ctx *mlx5dr_ste_get_ctx_v2(void);
+struct mlx5dr_ste_ctx *mlx5dr_ste_get_ctx_v3(void);
#endif /* _DR_STE_ */
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/steering/sws/dr_ste_v3.c b/drivers/net/ethernet/mellanox/mlx5/core/steering/sws/dr_ste_v3.c
new file mode 100644
index 000000000000..cc60ce1d274e
--- /dev/null
+++ b/drivers/net/ethernet/mellanox/mlx5/core/steering/sws/dr_ste_v3.c
@@ -0,0 +1,221 @@
+// SPDX-License-Identifier: GPL-2.0 OR Linux-OpenIB
+/* Copyright (c) 2024, NVIDIA CORPORATION & AFFILIATES. All rights reserved. */
+
+#include "dr_ste_v1.h"
+#include "dr_ste_v2.h"
+
+static void dr_ste_v3_set_encap(u8 *hw_ste_p, u8 *d_action,
+ u32 reformat_id, int size)
+{
+ MLX5_SET(ste_double_action_insert_with_ptr_v3, d_action, action_id,
+ DR_STE_V1_ACTION_ID_INSERT_POINTER);
+ /* The hardware expects here size in words (2 byte) */
+ MLX5_SET(ste_double_action_insert_with_ptr_v3, d_action, size, size / 2);
+ MLX5_SET(ste_double_action_insert_with_ptr_v3, d_action, pointer, reformat_id);
+ MLX5_SET(ste_double_action_insert_with_ptr_v3, d_action, attributes,
+ DR_STE_V1_ACTION_INSERT_PTR_ATTR_ENCAP);
+ dr_ste_v1_set_reparse(hw_ste_p);
+}
+
+static void dr_ste_v3_set_push_vlan(u8 *ste, u8 *d_action,
+ u32 vlan_hdr)
+{
+ MLX5_SET(ste_double_action_insert_with_inline_v3, d_action, action_id,
+ DR_STE_V1_ACTION_ID_INSERT_INLINE);
+ /* The hardware expects here offset to vlan header in words (2 byte) */
+ MLX5_SET(ste_double_action_insert_with_inline_v3, d_action, start_offset,
+ HDR_LEN_L2_MACS >> 1);
+ MLX5_SET(ste_double_action_insert_with_inline_v3, d_action, inline_data, vlan_hdr);
+ dr_ste_v1_set_reparse(ste);
+}
+
+static void dr_ste_v3_set_pop_vlan(u8 *hw_ste_p, u8 *s_action,
+ u8 vlans_num)
+{
+ MLX5_SET(ste_single_action_remove_header_size_v3, s_action,
+ action_id, DR_STE_V1_ACTION_ID_REMOVE_BY_SIZE);
+ MLX5_SET(ste_single_action_remove_header_size_v3, s_action,
+ start_anchor, DR_STE_HEADER_ANCHOR_1ST_VLAN);
+ /* The hardware expects here size in words (2 byte) */
+ MLX5_SET(ste_single_action_remove_header_size_v3, s_action,
+ remove_size, (HDR_LEN_L2_VLAN >> 1) * vlans_num);
+
+ dr_ste_v1_set_reparse(hw_ste_p);
+}
+
+static void dr_ste_v3_set_encap_l3(u8 *hw_ste_p,
+ u8 *frst_s_action,
+ u8 *scnd_d_action,
+ u32 reformat_id,
+ int size)
+{
+ /* Remove L2 headers */
+ MLX5_SET(ste_single_action_remove_header_v3, frst_s_action, action_id,
+ DR_STE_V1_ACTION_ID_REMOVE_HEADER_TO_HEADER);
+ MLX5_SET(ste_single_action_remove_header_v3, frst_s_action, end_anchor,
+ DR_STE_HEADER_ANCHOR_IPV6_IPV4);
+
+ /* Encapsulate with given reformat ID */
+ MLX5_SET(ste_double_action_insert_with_ptr_v3, scnd_d_action, action_id,
+ DR_STE_V1_ACTION_ID_INSERT_POINTER);
+ /* The hardware expects here size in words (2 byte) */
+ MLX5_SET(ste_double_action_insert_with_ptr_v3, scnd_d_action, size, size / 2);
+ MLX5_SET(ste_double_action_insert_with_ptr_v3, scnd_d_action, pointer, reformat_id);
+ MLX5_SET(ste_double_action_insert_with_ptr_v3, scnd_d_action, attributes,
+ DR_STE_V1_ACTION_INSERT_PTR_ATTR_ENCAP);
+
+ dr_ste_v1_set_reparse(hw_ste_p);
+}
+
+static void dr_ste_v3_set_rx_decap(u8 *hw_ste_p, u8 *s_action)
+{
+ MLX5_SET(ste_single_action_remove_header_v3, s_action, action_id,
+ DR_STE_V1_ACTION_ID_REMOVE_HEADER_TO_HEADER);
+ MLX5_SET(ste_single_action_remove_header_v3, s_action, decap, 1);
+ MLX5_SET(ste_single_action_remove_header_v3, s_action, vni_to_cqe, 1);
+ MLX5_SET(ste_single_action_remove_header_v3, s_action, end_anchor,
+ DR_STE_HEADER_ANCHOR_INNER_MAC);
+
+ dr_ste_v1_set_reparse(hw_ste_p);
+}
+
+static int
+dr_ste_v3_set_action_decap_l3_list(void *data, u32 data_sz,
+ u8 *hw_action, u32 hw_action_sz,
+ uint16_t *used_hw_action_num)
+{
+ u8 padded_data[DR_STE_L2_HDR_MAX_SZ] = {};
+ void *data_ptr = padded_data;
+ u16 used_actions = 0;
+ u32 inline_data_sz;
+ u32 i;
+
+ if (hw_action_sz / DR_STE_ACTION_DOUBLE_SZ < DR_STE_DECAP_L3_ACTION_NUM)
+ return -EINVAL;
+
+ inline_data_sz =
+ MLX5_FLD_SZ_BYTES(ste_double_action_insert_with_inline_v3, inline_data);
+
+ /* Add an alignment padding */
+ memcpy(padded_data + data_sz % inline_data_sz, data, data_sz);
+
+ /* Remove L2L3 outer headers */
+ MLX5_SET(ste_single_action_remove_header_v3, hw_action, action_id,
+ DR_STE_V1_ACTION_ID_REMOVE_HEADER_TO_HEADER);
+ MLX5_SET(ste_single_action_remove_header_v3, hw_action, decap, 1);
+ MLX5_SET(ste_single_action_remove_header_v3, hw_action, vni_to_cqe, 1);
+ MLX5_SET(ste_single_action_remove_header_v3, hw_action, end_anchor,
+ DR_STE_HEADER_ANCHOR_INNER_IPV6_IPV4);
+ hw_action += DR_STE_ACTION_DOUBLE_SZ;
+ used_actions++; /* Remove and NOP are a single double action */
+
+ /* Point to the last dword of the header */
+ data_ptr += (data_sz / inline_data_sz) * inline_data_sz;
+
+ /* Add the new header using inline action 4Byte at a time, the header
+ * is added in reversed order to the beginning of the packet to avoid
+ * incorrect parsing by the HW. Since header is 14B or 18B an extra
+ * two bytes are padded and later removed.
+ */
+ for (i = 0; i < data_sz / inline_data_sz + 1; i++) {
+ void *addr_inline;
+
+ MLX5_SET(ste_double_action_insert_with_inline_v3, hw_action, action_id,
+ DR_STE_V1_ACTION_ID_INSERT_INLINE);
+ /* The hardware expects here offset to words (2 bytes) */
+ MLX5_SET(ste_double_action_insert_with_inline_v3, hw_action, start_offset, 0);
+
+ /* Copy bytes one by one to avoid endianness problem */
+ addr_inline = MLX5_ADDR_OF(ste_double_action_insert_with_inline_v3,
+ hw_action, inline_data);
+ memcpy(addr_inline, data_ptr - i * inline_data_sz, inline_data_sz);
+ hw_action += DR_STE_ACTION_DOUBLE_SZ;
+ used_actions++;
+ }
+
+ /* Remove first 2 extra bytes */
+ MLX5_SET(ste_single_action_remove_header_size_v3, hw_action, action_id,
+ DR_STE_V1_ACTION_ID_REMOVE_BY_SIZE);
+ MLX5_SET(ste_single_action_remove_header_size_v3, hw_action, start_offset, 0);
+ /* The hardware expects here size in words (2 bytes) */
+ MLX5_SET(ste_single_action_remove_header_size_v3, hw_action, remove_size, 1);
+ used_actions++;
+
+ *used_hw_action_num = used_actions;
+
+ return 0;
+}
+
+static struct mlx5dr_ste_ctx ste_ctx_v3 = {
+ /* Builders */
+ .build_eth_l2_src_dst_init = &dr_ste_v1_build_eth_l2_src_dst_init,
+ .build_eth_l3_ipv6_src_init = &dr_ste_v1_build_eth_l3_ipv6_src_init,
+ .build_eth_l3_ipv6_dst_init = &dr_ste_v1_build_eth_l3_ipv6_dst_init,
+ .build_eth_l3_ipv4_5_tuple_init = &dr_ste_v1_build_eth_l3_ipv4_5_tuple_init,
+ .build_eth_l2_src_init = &dr_ste_v1_build_eth_l2_src_init,
+ .build_eth_l2_dst_init = &dr_ste_v1_build_eth_l2_dst_init,
+ .build_eth_l2_tnl_init = &dr_ste_v1_build_eth_l2_tnl_init,
+ .build_eth_l3_ipv4_misc_init = &dr_ste_v1_build_eth_l3_ipv4_misc_init,
+ .build_eth_ipv6_l3_l4_init = &dr_ste_v1_build_eth_ipv6_l3_l4_init,
+ .build_mpls_init = &dr_ste_v1_build_mpls_init,
+ .build_tnl_gre_init = &dr_ste_v1_build_tnl_gre_init,
+ .build_tnl_mpls_init = &dr_ste_v1_build_tnl_mpls_init,
+ .build_tnl_mpls_over_udp_init = &dr_ste_v1_build_tnl_mpls_over_udp_init,
+ .build_tnl_mpls_over_gre_init = &dr_ste_v1_build_tnl_mpls_over_gre_init,
+ .build_icmp_init = &dr_ste_v1_build_icmp_init,
+ .build_general_purpose_init = &dr_ste_v1_build_general_purpose_init,
+ .build_eth_l4_misc_init = &dr_ste_v1_build_eth_l4_misc_init,
+ .build_tnl_vxlan_gpe_init = &dr_ste_v1_build_flex_parser_tnl_vxlan_gpe_init,
+ .build_tnl_geneve_init = &dr_ste_v1_build_flex_parser_tnl_geneve_init,
+ .build_tnl_geneve_tlv_opt_init = &dr_ste_v1_build_flex_parser_tnl_geneve_tlv_opt_init,
+ .build_tnl_geneve_tlv_opt_exist_init =
+ &dr_ste_v1_build_flex_parser_tnl_geneve_tlv_opt_exist_init,
+ .build_register_0_init = &dr_ste_v1_build_register_0_init,
+ .build_register_1_init = &dr_ste_v1_build_register_1_init,
+ .build_src_gvmi_qpn_init = &dr_ste_v1_build_src_gvmi_qpn_init,
+ .build_flex_parser_0_init = &dr_ste_v1_build_flex_parser_0_init,
+ .build_flex_parser_1_init = &dr_ste_v1_build_flex_parser_1_init,
+ .build_tnl_gtpu_init = &dr_ste_v1_build_flex_parser_tnl_gtpu_init,
+ .build_tnl_header_0_1_init = &dr_ste_v1_build_tnl_header_0_1_init,
+ .build_tnl_gtpu_flex_parser_0_init = &dr_ste_v1_build_tnl_gtpu_flex_parser_0_init,
+ .build_tnl_gtpu_flex_parser_1_init = &dr_ste_v1_build_tnl_gtpu_flex_parser_1_init,
+
+ /* Getters and Setters */
+ .ste_init = &dr_ste_v1_init,
+ .set_next_lu_type = &dr_ste_v1_set_next_lu_type,
+ .get_next_lu_type = &dr_ste_v1_get_next_lu_type,
+ .is_miss_addr_set = &dr_ste_v1_is_miss_addr_set,
+ .set_miss_addr = &dr_ste_v1_set_miss_addr,
+ .get_miss_addr = &dr_ste_v1_get_miss_addr,
+ .set_hit_addr = &dr_ste_v1_set_hit_addr,
+ .set_byte_mask = &dr_ste_v1_set_byte_mask,
+ .get_byte_mask = &dr_ste_v1_get_byte_mask,
+
+ /* Actions */
+ .actions_caps = DR_STE_CTX_ACTION_CAP_TX_POP |
+ DR_STE_CTX_ACTION_CAP_RX_PUSH |
+ DR_STE_CTX_ACTION_CAP_RX_ENCAP,
+ .set_actions_rx = &dr_ste_v1_set_actions_rx,
+ .set_actions_tx = &dr_ste_v1_set_actions_tx,
+ .modify_field_arr_sz = ARRAY_SIZE(dr_ste_v2_action_modify_field_arr),
+ .modify_field_arr = dr_ste_v2_action_modify_field_arr,
+ .set_action_set = &dr_ste_v1_set_action_set,
+ .set_action_add = &dr_ste_v1_set_action_add,
+ .set_action_copy = &dr_ste_v1_set_action_copy,
+ .set_action_decap_l3_list = &dr_ste_v3_set_action_decap_l3_list,
+ .alloc_modify_hdr_chunk = &dr_ste_v1_alloc_modify_hdr_ptrn_arg,
+ .dealloc_modify_hdr_chunk = &dr_ste_v1_free_modify_hdr_ptrn_arg,
+ /* Actions bit set */
+ .set_encap = &dr_ste_v3_set_encap,
+ .set_push_vlan = &dr_ste_v3_set_push_vlan,
+ .set_pop_vlan = &dr_ste_v3_set_pop_vlan,
+ .set_rx_decap = &dr_ste_v3_set_rx_decap,
+ .set_encap_l3 = &dr_ste_v3_set_encap_l3,
+ /* Send */
+ .prepare_for_postsend = &dr_ste_v1_prepare_for_postsend,
+};
+
+struct mlx5dr_ste_ctx *mlx5dr_ste_get_ctx_v3(void)
+{
+ return &ste_ctx_v3;
+}
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/steering/sws/mlx5_ifc_dr.h b/drivers/net/ethernet/mellanox/mlx5/core/steering/sws/mlx5_ifc_dr.h
index fb078fa0f0cc..898c3618ff26 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/steering/sws/mlx5_ifc_dr.h
+++ b/drivers/net/ethernet/mellanox/mlx5/core/steering/sws/mlx5_ifc_dr.h
@@ -600,4 +600,44 @@ struct mlx5_ifc_ste_double_action_aso_v1_bits {
};
};
+struct mlx5_ifc_ste_single_action_remove_header_v3_bits {
+ u8 action_id[0x8];
+ u8 start_anchor[0x7];
+ u8 end_anchor[0x7];
+ u8 reserved_at_16[0x1];
+ u8 outer_l4_remove[0x1];
+ u8 reserved_at_18[0x4];
+ u8 decap[0x1];
+ u8 vni_to_cqe[0x1];
+ u8 qos_profile[0x2];
+};
+
+struct mlx5_ifc_ste_single_action_remove_header_size_v3_bits {
+ u8 action_id[0x8];
+ u8 start_anchor[0x7];
+ u8 start_offset[0x8];
+ u8 outer_l4_remove[0x1];
+ u8 reserved_at_18[0x2];
+ u8 remove_size[0x6];
+};
+
+struct mlx5_ifc_ste_double_action_insert_with_inline_v3_bits {
+ u8 action_id[0x8];
+ u8 start_anchor[0x7];
+ u8 start_offset[0x8];
+ u8 reserved_at_17[0x9];
+
+ u8 inline_data[0x20];
+};
+
+struct mlx5_ifc_ste_double_action_insert_with_ptr_v3_bits {
+ u8 action_id[0x8];
+ u8 start_anchor[0x7];
+ u8 start_offset[0x8];
+ u8 size[0x6];
+ u8 attributes[0x3];
+
+ u8 pointer[0x20];
+};
+
#endif /* MLX5_IFC_DR_H */
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/steering/sws/mlx5dr.h b/drivers/net/ethernet/mellanox/mlx5/core/steering/sws/mlx5dr.h
index 3ac7dc67509f..0bb3724c10c2 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/steering/sws/mlx5dr.h
+++ b/drivers/net/ethernet/mellanox/mlx5/core/steering/sws/mlx5dr.h
@@ -160,7 +160,7 @@ mlx5dr_is_supported(struct mlx5_core_dev *dev)
(MLX5_CAP_ESW_FLOWTABLE_FDB(dev, sw_owner) ||
(MLX5_CAP_ESW_FLOWTABLE_FDB(dev, sw_owner_v2) &&
(MLX5_CAP_GEN(dev, steering_format_version) <=
- MLX5_STEERING_FORMAT_CONNECTX_7)));
+ MLX5_STEERING_FORMAT_CONNECTX_8)));
}
/* buddy functions & structure */
--
2.45.0
Powered by blists - more mailing lists