[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20241221081530.3003900-9-o.rempel@pengutronix.de>
Date: Sat, 21 Dec 2024 09:15:30 +0100
From: Oleksij Rempel <o.rempel@...gutronix.de>
To: "David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>,
Andrew Lunn <andrew+netdev@...n.ch>,
Heiner Kallweit <hkallweit1@...il.com>,
Jonathan Corbet <corbet@....net>
Cc: Oleksij Rempel <o.rempel@...gutronix.de>,
kernel@...gutronix.de,
linux-kernel@...r.kernel.org,
netdev@...r.kernel.org,
Simon Horman <horms@...nel.org>,
Russell King <linux@...linux.org.uk>,
Maxime Chevallier <maxime.chevallier@...tlin.com>,
linux-doc@...r.kernel.org
Subject: [PATCH net-next v4 8/8] net: phy: dp83tg720: add statistics support
Add support for reporting PHY statistics in the DP83TG720 driver. This
includes cumulative tracking of link loss events, transmit/receive
packet counts, and error counts. Implemented functions to update and
provide statistics via ethtool, with optional polling support enabled
through `PHY_POLL_STATS`.
Signed-off-by: Oleksij Rempel <o.rempel@...gutronix.de>
---
changes v2:
- drop use of FIELD_GET
- add comments
---
drivers/net/phy/dp83tg720.c | 161 ++++++++++++++++++++++++++++++++++++
1 file changed, 161 insertions(+)
diff --git a/drivers/net/phy/dp83tg720.c b/drivers/net/phy/dp83tg720.c
index 0ef4d7dba065..ea2f0bc27c4c 100644
--- a/drivers/net/phy/dp83tg720.c
+++ b/drivers/net/phy/dp83tg720.c
@@ -51,6 +51,9 @@
/* Register 0x0405: Unknown Register */
#define DP83TG720S_UNKNOWN_0405 0x405
+#define DP83TG720S_LINK_QUAL_3 0x547
+#define DP83TG720S_LINK_LOSS_CNT_MASK GENMASK(15, 10)
+
/* Register 0x0576: TDR Master Link Down Control */
#define DP83TG720S_TDR_MASTER_LINK_DOWN 0x576
@@ -60,6 +63,29 @@
/* In RGMII mode, Enable or disable the internal delay for TXD */
#define DP83TG720S_RGMII_TX_CLK_SEL BIT(0)
+/*
+ * DP83TG720S_PKT_STAT_x registers correspond to similarly named registers
+ * in the datasheet (PKT_STAT_1 through PKT_STAT_6). These registers store
+ * 32-bit or 16-bit counters for TX and RX statistics and must be read in
+ * sequence to ensure the counters are cleared correctly.
+ *
+ * - DP83TG720S_PKT_STAT_1: Contains TX packet count bits [15:0].
+ * - DP83TG720S_PKT_STAT_2: Contains TX packet count bits [31:16].
+ * - DP83TG720S_PKT_STAT_3: Contains TX error packet count.
+ * - DP83TG720S_PKT_STAT_4: Contains RX packet count bits [15:0].
+ * - DP83TG720S_PKT_STAT_5: Contains RX packet count bits [31:16].
+ * - DP83TG720S_PKT_STAT_6: Contains RX error packet count.
+ *
+ * Keeping the register names as defined in the datasheet helps maintain
+ * clarity and alignment with the documentation.
+ */
+#define DP83TG720S_PKT_STAT_1 0x639
+#define DP83TG720S_PKT_STAT_2 0x63a
+#define DP83TG720S_PKT_STAT_3 0x63b
+#define DP83TG720S_PKT_STAT_4 0x63c
+#define DP83TG720S_PKT_STAT_5 0x63d
+#define DP83TG720S_PKT_STAT_6 0x63e
+
/* Register 0x083F: Unknown Register */
#define DP83TG720S_UNKNOWN_083F 0x83f
@@ -69,6 +95,113 @@
#define DP83TG720_SQI_MAX 7
+struct dp83tg720_stats {
+ u64 link_loss_cnt;
+ u64 tx_pkt_cnt;
+ u64 tx_err_pkt_cnt;
+ u64 rx_pkt_cnt;
+ u64 rx_err_pkt_cnt;
+};
+
+struct dp83tg720_priv {
+ struct dp83tg720_stats stats;
+};
+
+/**
+ * dp83tg720_update_stats - Update the PHY statistics for the DP83TD510 PHY.
+ * @phydev: Pointer to the phy_device structure.
+ *
+ * The function reads the PHY statistics registers and updates the statistics
+ * structure.
+ *
+ * Returns: 0 on success or a negative error code on failure.
+ */
+static int dp83tg720_update_stats(struct phy_device *phydev)
+{
+ struct dp83tg720_priv *priv = phydev->priv;
+ u32 count;
+ int ret;
+
+ /* Read the link loss count */
+ ret = phy_read_mmd(phydev, MDIO_MMD_VEND2, DP83TG720S_LINK_QUAL_3);
+ if (ret < 0)
+ return ret;
+ /* link_loss_cnt */
+ count = FIELD_GET(DP83TG720S_LINK_LOSS_CNT_MASK, ret);
+ ethtool_stat_add(&priv->stats.link_loss_cnt, count);
+
+ /* The DP83TG720S_PKT_STAT registers are divided into two groups:
+ * - Group 1 (TX stats): DP83TG720S_PKT_STAT_1 to DP83TG720S_PKT_STAT_3
+ * - Group 2 (RX stats): DP83TG720S_PKT_STAT_4 to DP83TG720S_PKT_STAT_6
+ *
+ * Registers in each group are cleared only after reading them in a
+ * plain sequence (e.g., 1, 2, 3 for Group 1 or 4, 5, 6 for Group 2).
+ * Any deviation from the sequence, such as reading 1, 2, 1, 2, 3, will
+ * prevent the group from being cleared. Additionally, the counters
+ * for a group are frozen as soon as the first register in that group
+ * is accessed.
+ */
+ ret = phy_read_mmd(phydev, MDIO_MMD_VEND2, DP83TG720S_PKT_STAT_1);
+ if (ret < 0)
+ return ret;
+ /* tx_pkt_cnt_15_0 */
+ count = ret;
+
+ ret = phy_read_mmd(phydev, MDIO_MMD_VEND2, DP83TG720S_PKT_STAT_2);
+ if (ret < 0)
+ return ret;
+ /* tx_pkt_cnt_31_16 */
+ count |= ret << 16;
+ ethtool_stat_add(&priv->stats.tx_pkt_cnt, count);
+
+ ret = phy_read_mmd(phydev, MDIO_MMD_VEND2, DP83TG720S_PKT_STAT_3);
+ if (ret < 0)
+ return ret;
+ /* tx_err_pkt_cnt */
+ ethtool_stat_add(&priv->stats.tx_err_pkt_cnt, ret);
+
+ ret = phy_read_mmd(phydev, MDIO_MMD_VEND2, DP83TG720S_PKT_STAT_4);
+ if (ret < 0)
+ return ret;
+ /* rx_pkt_cnt_15_0 */
+ count = ret;
+
+ ret = phy_read_mmd(phydev, MDIO_MMD_VEND2, DP83TG720S_PKT_STAT_5);
+ if (ret < 0)
+ return ret;
+ /* rx_pkt_cnt_31_16 */
+ count |= ret << 16;
+ ethtool_stat_add(&priv->stats.rx_pkt_cnt, count);
+
+ ret = phy_read_mmd(phydev, MDIO_MMD_VEND2, DP83TG720S_PKT_STAT_6);
+ if (ret < 0)
+ return ret;
+ /* rx_err_pkt_cnt */
+ ethtool_stat_add(&priv->stats.rx_err_pkt_cnt, ret);
+
+ return 0;
+}
+
+static void dp83tg720_get_link_stats(struct phy_device *phydev,
+ struct ethtool_link_ext_stats *link_stats)
+{
+ struct dp83tg720_priv *priv = phydev->priv;
+
+ link_stats->link_down_events = priv->stats.link_loss_cnt;
+}
+
+static void dp83tg720_get_phy_stats(struct phy_device *phydev,
+ struct ethtool_eth_phy_stats *eth_stats,
+ struct ethtool_phy_stats *stats)
+{
+ struct dp83tg720_priv *priv = phydev->priv;
+
+ stats->tx_packets = priv->stats.tx_pkt_cnt;
+ stats->tx_errors = priv->stats.tx_err_pkt_cnt;
+ stats->rx_packets = priv->stats.rx_pkt_cnt;
+ stats->rx_errors = priv->stats.rx_err_pkt_cnt;
+}
+
/**
* dp83tg720_cable_test_start - Start the cable test for the DP83TG720 PHY.
* @phydev: Pointer to the phy_device structure.
@@ -182,6 +315,11 @@ static int dp83tg720_cable_test_get_status(struct phy_device *phydev,
ethnl_cable_test_result(phydev, ETHTOOL_A_CABLE_PAIR_A, stat);
+ /* save the current stats before resetting the PHY */
+ ret = dp83tg720_update_stats(phydev);
+ if (ret)
+ return ret;
+
return phy_init_hw(phydev);
}
@@ -217,6 +355,11 @@ static int dp83tg720_read_status(struct phy_device *phydev)
phy_sts = phy_read(phydev, DP83TG720S_MII_REG_10);
phydev->link = !!(phy_sts & DP83TG720S_LINK_STATUS);
if (!phydev->link) {
+ /* save the current stats before resetting the PHY */
+ ret = dp83tg720_update_stats(phydev);
+ if (ret)
+ return ret;
+
/* According to the "DP83TC81x, DP83TG72x Software
* Implementation Guide", the PHY needs to be reset after a
* link loss or if no link is created after at least 100ms.
@@ -341,12 +484,27 @@ static int dp83tg720_config_init(struct phy_device *phydev)
return genphy_c45_pma_baset1_read_master_slave(phydev);
}
+static int dp83tg720_probe(struct phy_device *phydev)
+{
+ struct device *dev = &phydev->mdio.dev;
+ struct dp83tg720_priv *priv;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ phydev->priv = priv;
+
+ return 0;
+}
+
static struct phy_driver dp83tg720_driver[] = {
{
PHY_ID_MATCH_MODEL(DP83TG720S_PHY_ID),
.name = "TI DP83TG720S",
.flags = PHY_POLL_CABLE_TEST,
+ .probe = dp83tg720_probe,
.config_aneg = dp83tg720_config_aneg,
.read_status = dp83tg720_read_status,
.get_features = genphy_c45_pma_read_ext_abilities,
@@ -355,6 +513,9 @@ static struct phy_driver dp83tg720_driver[] = {
.get_sqi_max = dp83tg720_get_sqi_max,
.cable_test_start = dp83tg720_cable_test_start,
.cable_test_get_status = dp83tg720_cable_test_get_status,
+ .get_link_stats = dp83tg720_get_link_stats,
+ .get_phy_stats = dp83tg720_get_phy_stats,
+ .update_stats = dp83tg720_update_stats,
.suspend = genphy_suspend,
.resume = genphy_resume,
--
2.39.5
Powered by blists - more mailing lists