[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20250107162350.1281165-6-ninad@linux.ibm.com>
Date: Tue, 7 Jan 2025 10:23:42 -0600
From: Ninad Palsule <ninad@...ux.ibm.com>
To: minyard@....org, robh@...nel.org, krzk+dt@...nel.org, conor+dt@...nel.org,
andrew+netdev@...n.ch, davem@...emloft.net, edumazet@...gle.com,
kuba@...nel.org, pabeni@...hat.com, ninad@...ux.ibm.com,
ratbert@...aday-tech.com, openipmi-developer@...ts.sourceforge.net,
netdev@...r.kernel.org, joel@....id.au, andrew@...econstruct.com.au,
devicetree@...r.kernel.org, eajames@...ux.ibm.com,
linux-arm-kernel@...ts.infradead.org, linux-aspeed@...ts.ozlabs.org,
linux-kernel@...r.kernel.org
Subject: [PATCH v2 05/10] ARM: dts: aspeed: system1: Add RGMII support
system1 has 2 transceiver connected through the RGMII interfaces. Added
device tree entry to enable RGMII support.
ASPEED AST2600 documentation recommends using 'rgmii-rxid' as a
'phy-mode' for mac0 and mac1 to enable the RX interface delay from the
PHY chip.
Signed-off-by: Ninad Palsule <ninad@...ux.ibm.com>
---
.../dts/aspeed/aspeed-bmc-ibm-system1.dts | 38 ++++++++++++++++---
1 file changed, 33 insertions(+), 5 deletions(-)
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-system1.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-system1.dts
index d11a922c9d44..0f4658074709 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-system1.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-system1.dts
@@ -425,14 +425,42 @@ &lpc_ctrl {
memory-region = <&flash_memory>;
};
+&mdio0 {
+ status = "okay";
+
+ ethphy0: ethernet-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0>;
+ };
+};
+
+&mdio2 {
+ status = "okay";
+
+ ethphy2: ethernet-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0>;
+ };
+};
+
+&mac0 {
+ status = "okay";
+
+ phy-mode = "rgmii-rxid";
+ phy-handle = <ðphy0>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rgmii1_default>;
+};
+
&mac2 {
status = "okay";
+
+ phy-mode = "rgmii";
+ phy-handle = <ðphy2>;
+
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_rmii3_default>;
- clocks = <&syscon ASPEED_CLK_GATE_MAC3CLK>,
- <&syscon ASPEED_CLK_MAC3RCLK>;
- clock-names = "MACCLK", "RCLK";
- use-ncsi;
+ pinctrl-0 = <&pinctrl_rgmii3_default>;
};
&mac3 {
--
2.43.0
Powered by blists - more mailing lists