netdev - [PATCH v2 08/10] ARM: dts: aspeed: system1: Remove VRs max8952

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20250107162350.1281165-9-ninad@linux.ibm.com>
Date: Tue,  7 Jan 2025 10:23:45 -0600
From: Ninad Palsule <ninad@...ux.ibm.com>
To: minyard@....org, robh@...nel.org, krzk+dt@...nel.org, conor+dt@...nel.org,
        andrew+netdev@...n.ch, davem@...emloft.net, edumazet@...gle.com,
        kuba@...nel.org, pabeni@...hat.com, ninad@...ux.ibm.com,
        ratbert@...aday-tech.com, openipmi-developer@...ts.sourceforge.net,
        netdev@...r.kernel.org, joel@....id.au, andrew@...econstruct.com.au,
        devicetree@...r.kernel.org, eajames@...ux.ibm.com,
        linux-arm-kernel@...ts.infradead.org, linux-aspeed@...ts.ozlabs.org,
        linux-kernel@...r.kernel.org
Subject: [PATCH v2 08/10] ARM: dts: aspeed: system1: Remove VRs max8952

Removing voltage regulators max8952 from device tree. Those are fully
controlled by hardware and firmware should not touch them.

Signed-off-by: Ninad Palsule <ninad@...ux.ibm.com>
---
 .../dts/aspeed/aspeed-bmc-ibm-system1.dts     | 34 -------------------
 1 file changed, 34 deletions(-)

diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-system1.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-system1.dts
index 5e6824836213..90570b4d6d35 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-system1.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-system1.dts
@@ -514,23 +514,6 @@ eeprom@50 {
 		compatible = "atmel,24c64";
 		reg = <0x50>;
 	};
-
-	regulator@60 {
-		compatible = "maxim,max8952";
-		reg = <0x60>;
-
-		max8952,default-mode = <0>;
-		max8952,dvs-mode-microvolt = <1250000>, <1200000>,
-						<1050000>, <950000>;
-		max8952,sync-freq = <0>;
-		max8952,ramp-speed = <0>;
-
-		regulator-name = "VR_v77_1v4";
-		regulator-min-microvolt = <770000>;
-		regulator-max-microvolt = <1400000>;
-		regulator-always-on;
-		regulator-boot-on;
-	};
 };
 
 &i2c1 {
@@ -1226,23 +1209,6 @@ eeprom@50 {
 		compatible = "atmel,24c64";
 		reg = <0x50>;
 	};
-
-	regulator@60 {
-		compatible = "maxim,max8952";
-		reg = <0x60>;
-
-		max8952,default-mode = <0>;
-		max8952,dvs-mode-microvolt = <1250000>, <1200000>,
-						<1050000>, <950000>;
-		max8952,sync-freq = <0>;
-		max8952,ramp-speed = <0>;
-
-		regulator-name = "VR_v77_1v4";
-		regulator-min-microvolt = <770000>;
-		regulator-max-microvolt = <1400000>;
-		regulator-always-on;
-		regulator-boot-on;
-	};
 };
 
 &i2c11 {
-- 
2.43.0