Message-Id: <E1tVZDW-0002Jr-W3@rmk-PC.armlinux.org.uk>
Date: Wed, 08 Jan 2025 16:47:38 +0000
From: "Russell King (Oracle)" <rmk+kernel@...linux.org.uk>
To: Andrew Lunn <andrew@...n.ch>,
	Heiner Kallweit <hkallweit1@...il.com>
Cc: Alexandre Torgue <alexandre.torgue@...s.st.com>,
	Andrew Lunn <andrew+netdev@...n.ch>,
	"David S. Miller" <davem@...emloft.net>,
	Eric Dumazet <edumazet@...gle.com>,
	Jakub Kicinski <kuba@...nel.org>,
	Jose Abreu <joabreu@...opsys.com>,
	linux-arm-kernel@...ts.infradead.org,
	linux-stm32@...md-mailman.stormreply.com,
	Maxime Coquelin <mcoquelin.stm32@...il.com>,
	netdev@...r.kernel.org,
	Paolo Abeni <pabeni@...hat.com>
Subject: [PATCH net-next v4 02/18] net: stmmac: move tx_lpi_timer tracking to
 phylib

When stmmac_ethtool_op_get_eee() is called, stmmac sets the tx_lpi_timer
and tx_lpi_enabled members, and then calls into phylink and thus phylib.
phylib overwrites these members.

phylib will also cause a link down/link up transition when settings
that impact the MAC have been changed.

Convert stmmac to use the tx_lpi_timer setting in struct phy_device,
updating priv->tx_lpi_timer each time when the link comes up, rather
than trying to maintain this user setting itself. We initialise the
phylib tx_lpi_timer setting by doing a get_ee-modify-set_eee sequence
with the last known priv->tx_lpi_timer value. In order for this to work
correctly, we also need this member to be initialised earlier.

As stmmac_eee_init() is no longer called outside of stmmac_main.c, make
it static.

Reviewed-by: Andrew Lunn <andrew@...n.ch>
Tested-by: Choong Yong Liang <yong.liang.choong@...ux.intel.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@...linux.org.uk>
---
 drivers/net/ethernet/stmicro/stmmac/stmmac.h  |  1 -
 .../ethernet/stmicro/stmmac/stmmac_ethtool.c  | 14 +------------
 .../net/ethernet/stmicro/stmmac/stmmac_main.c | 21 ++++++++++++++-----
 3 files changed, 17 insertions(+), 19 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac.h b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
index b8d631e559c0..df386fc948ec 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac.h
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
@@ -406,7 +406,6 @@ int stmmac_dvr_probe(struct device *device,
 		     struct plat_stmmacenet_data *plat_dat,
 		     struct stmmac_resources *res);
 void stmmac_disable_eee_mode(struct stmmac_priv *priv);
-bool stmmac_eee_init(struct stmmac_priv *priv);
 int stmmac_reinit_queues(struct net_device *dev, u32 rx_cnt, u32 tx_cnt);
 int stmmac_reinit_ringparam(struct net_device *dev, u32 rx_size, u32 tx_size);
 int stmmac_bus_clks_config(struct stmmac_priv *priv, bool enabled);
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c
index 16b4d8c21c90..0429a99a8114 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c
@@ -898,7 +898,6 @@ static int stmmac_ethtool_op_get_eee(struct net_device *dev,
 	if (!priv->dma_cap.eee)
 		return -EOPNOTSUPP;
 
-	edata->tx_lpi_timer = priv->tx_lpi_timer;
 	edata->tx_lpi_enabled = priv->tx_lpi_enabled;
 
 	return phylink_ethtool_get_eee(priv->phylink, edata);
@@ -908,7 +907,6 @@ static int stmmac_ethtool_op_set_eee(struct net_device *dev,
 				     struct ethtool_keee *edata)
 {
 	struct stmmac_priv *priv = netdev_priv(dev);
-	int ret;
 
 	if (!priv->dma_cap.eee)
 		return -EOPNOTSUPP;
@@ -920,17 +918,7 @@ static int stmmac_ethtool_op_set_eee(struct net_device *dev,
 	if (!edata->eee_enabled)
 		stmmac_disable_eee_mode(priv);
 
-	ret = phylink_ethtool_set_eee(priv->phylink, edata);
-	if (ret)
-		return ret;
-
-	if (edata->eee_enabled &&
-	    priv->tx_lpi_timer != edata->tx_lpi_timer) {
-		priv->tx_lpi_timer = edata->tx_lpi_timer;
-		stmmac_eee_init(priv);
-	}
-
-	return 0;
+	return phylink_ethtool_set_eee(priv->phylink, edata);
 }
 
 static u32 stmmac_usec2riwt(u32 usec, struct stmmac_priv *priv)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 70c8f60d34f2..e80ac74538d2 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -469,7 +469,7 @@ static void stmmac_eee_ctrl_timer(struct timer_list *t)
  *  can also manage EEE, this function enable the LPI state and start related
  *  timer.
  */
-bool stmmac_eee_init(struct stmmac_priv *priv)
+static bool stmmac_eee_init(struct stmmac_priv *priv)
 {
 	int eee_tw_timer = priv->eee_tw_timer;
 
@@ -1088,6 +1088,7 @@ static void stmmac_mac_link_up(struct phylink_config *config,
 		priv->eee_active =
 			phy_init_eee(phy, !(priv->plat->flags &
 				STMMAC_FLAG_RX_CLK_RUNS_IN_LPI)) >= 0;
+		priv->tx_lpi_timer = phy->eee_cfg.tx_lpi_timer;
 		priv->eee_enabled = stmmac_eee_init(priv);
 		priv->tx_lpi_enabled = priv->eee_enabled;
 		stmmac_set_eee_pls(priv, priv->hw, true);
@@ -1187,6 +1188,16 @@ static int stmmac_init_phy(struct net_device *dev)
 		ret = phylink_fwnode_phy_connect(priv->phylink, fwnode, 0);
 	}
 
+	if (ret == 0) {
+		struct ethtool_keee eee;
+
+		/* Configure phylib's copy of the LPI timer */
+		if (!phylink_ethtool_get_eee(priv->phylink, &eee)) {
+			eee.tx_lpi_timer = priv->tx_lpi_timer;
+			phylink_ethtool_set_eee(priv->phylink, &eee);
+		}
+	}
+
 	if (!priv->plat->pmt) {
 		struct ethtool_wolinfo wol = { .cmd = ETHTOOL_GWOL };
 
@@ -3446,10 +3457,6 @@ static int stmmac_hw_setup(struct net_device *dev, bool ptp_register)
 
 	priv->eee_tw_timer = STMMAC_DEFAULT_TWT_LS;
 
-	/* Convert the timer from msec to usec */
-	if (!priv->tx_lpi_timer)
-		priv->tx_lpi_timer = eee_timer * 1000;
-
 	if (priv->use_riwt) {
 		u32 queue;
 
@@ -3916,6 +3923,10 @@ static int __stmmac_open(struct net_device *dev,
 	u32 chan;
 	int ret;
 
+	/* Initialise the tx lpi timer, converting from msec to usec */
+	if (!priv->tx_lpi_timer)
+		priv->tx_lpi_timer = eee_timer * 1000;
+
 	ret = pm_runtime_resume_and_get(priv->device);
 	if (ret < 0)
 		return ret;
-- 
2.30.2

Powered by blists - more mailing lists