| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20250109105600.41297-2-basharath@couthit.com>
Date: Thu, 9 Jan 2025 16:25:51 +0530
From: Basharath Hussain Khaja <basharath@...thit.com>
To: danishanwar@...com,
rogerq@...nel.org,
andrew+netdev@...n.ch,
davem@...emloft.net,
edumazet@...gle.com,
kuba@...nel.org,
pabeni@...hat.com,
robh@...nel.org,
krzk+dt@...nel.org,
conor+dt@...nel.org,
nm@...com,
ssantosh@...nel.org,
tony@...mide.com,
richardcochran@...il.com,
parvathi@...thit.com,
basharath@...thit.com,
schnelle@...ux.ibm.com,
rdunlap@...radead.org,
diogo.ivo@...mens.com,
m-karicheri2@...com,
horms@...nel.org,
jacob.e.keller@...el.com,
m-malladi@...com,
javier.carrasco.cruz@...il.com,
afd@...com,
s-anna@...com
Cc: linux-arm-kernel@...ts.infradead.org,
netdev@...r.kernel.org,
devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org,
linux-omap@...r.kernel.org,
pratheesh@...com,
prajith@...com,
vigneshr@...com,
praneeth@...com,
srk@...com,
rogerq@...com,
krishna@...thit.com,
pmohan@...thit.com,
mohan@...thit.com
Subject: [RFC PATCH 01/10] dt-bindings: net: ti: Adds device tree binding for DUAL-EMAC mode support on PRU-ICSS2 for AM57xx SOCs
From: Parvathi Pudi <parvathi@...thit.com>
Documentation update for the newly added "pruss2_eth" device tree
node and its dependencies along with compatibility for PRU-ICSS
Industrial Ethernet Peripheral (IEP), PRU-ICSS Enhanced Capture
(eCAP) peripheral and using YAML binding document for AM57xx SoCs.
Signed-off-by: Roger Quadros <rogerq@...com>
Signed-off-by: Andrew F. Davis <afd@...com>
Signed-off-by: Murali Karicheri <m-karicheri2@...com>
Signed-off-by: Parvathi Pudi <parvathi@...thit.com>
Signed-off-by: Basharath Hussain Khaja <basharath@...thit.com>
---
.../devicetree/bindings/net/ti,icss-iep.yaml | 6 +
.../bindings/net/ti,icssm-prueth.yaml | 153 ++++++++++++++++++
.../bindings/net/ti,pruss-ecap.yaml | 32 ++++
.../devicetree/bindings/soc/ti/ti,pruss.yaml | 9 ++
4 files changed, 200 insertions(+)
create mode 100644 Documentation/devicetree/bindings/net/ti,icssm-prueth.yaml
create mode 100644 Documentation/devicetree/bindings/net/ti,pruss-ecap.yaml
diff --git a/Documentation/devicetree/bindings/net/ti,icss-iep.yaml b/Documentation/devicetree/bindings/net/ti,icss-iep.yaml
index e36e3a622904..afacdb61a84c 100644
--- a/Documentation/devicetree/bindings/net/ti,icss-iep.yaml
+++ b/Documentation/devicetree/bindings/net/ti,icss-iep.yaml
@@ -8,18 +8,24 @@ title: Texas Instruments ICSS Industrial Ethernet Peripheral (IEP) module
maintainers:
- Md Danish Anwar <danishanwar@...com>
+ - Parvathi Pudi <parvathi@...thit.com>
+ - Basharath Hussain Khaja <basharath@...thit.com>
properties:
compatible:
oneOf:
- items:
- enum:
+ - ti,am5728-icss-iep
- ti,am642-icss-iep
- ti,j721e-icss-iep
- const: ti,am654-icss-iep
- const: ti,am654-icss-iep
+ - items:
+ - enum:
+ - ti,am5728-icss-iep
reg:
maxItems: 1
diff --git a/Documentation/devicetree/bindings/net/ti,icssm-prueth.yaml b/Documentation/devicetree/bindings/net/ti,icssm-prueth.yaml
new file mode 100644
index 000000000000..34d68619c086
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/ti,icssm-prueth.yaml
@@ -0,0 +1,153 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/ti,icssm-prueth.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments ICSSM PRUSS Ethernet
+
+maintainers:
+ - Roger Quadros <rogerq@...com>
+ - Andrew F. Davis <afd@...com>
+ - Parvathi Pudi <parvathi@...thit.com>
+ - Basharath Hussain Khaja <basharath@...thit.com>
+
+description:
+ Ethernet based on the Programmable Real-Time Unit and Industrial
+ Communication Subsystem.
+
+properties:
+ compatible:
+ enum:
+ - ti,am57-prueth # for AM57x SoC family
+
+ sram:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ phandle to OCMC SRAM node
+
+ ti,mii-rt:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ phandle to MII_RT module's syscon regmap
+
+ ti,iep:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ phandle to IEP (Industrial Ethernet Peripheral) for ICSS
+
+ ecap:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ phandle to Enhanced Capture (eCAP) event for ICSS
+
+ interrupts:
+ maxItems: 2
+ description:
+ Interrupt specifiers to IRQ.
+
+ interrupt-names:
+ items:
+ - const: rx_lre_hp
+ - const: rx_lre_lp
+
+ ethernet-ports:
+ type: object
+ additionalProperties: false
+
+ properties:
+ '#address-cells':
+ const: 1
+ '#size-cells':
+ const: 0
+
+ patternProperties:
+ ^port@[0-1]$:
+ type: object
+ description: ICSSM PRUETH external ports
+ $ref: ethernet-controller.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ reg:
+ items:
+ - enum: [0, 1]
+ description: ICSSG PRUETH port number
+
+ interrupts:
+ maxItems: 3
+
+ interrupt-names:
+ items:
+ - const: rx
+ - const: emac_ptp_tx
+ - const: hsr_ptp_tx
+
+ ti,no-half-duplex:
+ type: boolean
+ description:
+ Disable half duplex operation on ICSSM MII port.
+
+ required:
+ - reg
+ anyOf:
+ - required:
+ - port@0
+ - required:
+ - port@1
+
+required:
+ - compatible
+ - sram
+ - ti,mii-rt
+ - ti,iep
+ - ecap
+ - ethernet-ports
+ - interrupts
+ - interrupt-names
+
+allOf:
+ - $ref: /schemas/remoteproc/ti,pru-consumer.yaml#
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ /* Dual-MAC Ethernet application node on PRU-ICSS2 */
+ pruss2_eth: pruss2-eth {
+ compatible = "ti,am57-prueth";
+ ti,prus = <&pru2_0>, <&pru2_1>;
+ sram = <&ocmcram1>;
+ ti,mii-rt = <&pruss2_mii_rt>;
+ ti,iep = <&pruss2_iep>;
+ ecap = <&pruss2_ecap>;
+ interrupts = <20 2 2>, <21 3 3>;
+ interrupt-names = "rx_lre_hp", "rx_lre_lp";
+ interrupt-parent = <&pruss2_intc>;
+
+ ethernet-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pruss2_emac0: port@0 {
+ reg = <0>;
+ phy-handle = <&pruss2_eth0_phy>;
+ phy-mode = "mii";
+ interrupts = <20 2 2>, <26 6 6>, <23 6 6>;
+ interrupt-names = "rx", "emac_ptp_tx", "hsr_ptp_tx";
+ ti,no-half-duplex;
+ /* Filled in by bootloader */
+ local-mac-address = [00 00 00 00 00 00];
+ };
+
+ pruss2_emac1: port@1 {
+ reg = <1>;
+ phy-handle = <&pruss2_eth1_phy>;
+ phy-mode = "mii";
+ interrupts = <21 3 3>, <27 9 7>, <24 9 7>;
+ interrupt-names = "rx", "emac_ptp_tx", "hsr_ptp_tx";
+ ti,no-half-duplex;
+ /* Filled in by bootloader */
+ local-mac-address = [00 00 00 00 00 00];
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/net/ti,pruss-ecap.yaml b/Documentation/devicetree/bindings/net/ti,pruss-ecap.yaml
new file mode 100644
index 000000000000..d42e636bf516
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/ti,pruss-ecap.yaml
@@ -0,0 +1,32 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/ti,pruss-ecap.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments PRU-ICSS Enhanced Capture (eCAP) event module
+
+maintainers:
+ - Murali Karicheri <m-karicheri2@...com>
+ - Parvathi Pudi <parvathi@...thit.com>
+ - Basharath Hussain Khaja <basharath@...thit.com>
+
+properties:
+ compatible:
+ const: ti,pruss-ecap
+
+ reg:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ pruss0_ecap: ecap@...00 {
+ compatible = "ti,pruss-ecap";
+ reg = <0x30000 0x60>;
+ };
diff --git a/Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml b/Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml
index 927b3200e29e..ddd65bd93aa1 100644
--- a/Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml
+++ b/Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml
@@ -251,6 +251,15 @@ patternProperties:
type: object
+ ecap@[a-f0-9]+$:
+ description: |
+ PRU-ICSS has a Enhanced Capture (eCAP) event module which can generate
+ and capture periodic timer based events which will be used for features
+ like RX Pacing to rise interrupt when the timer event has occurred.
+ Each PRU-ICSS instance has one eCAP modeule irrespective of SOCs.
+
+ type: object
+
mii-rt@[a-f0-9]+$:
description: |
Real-Time Ethernet to support multiple industrial communication protocols.
--
2.34.1
Powered by blists - more mailing lists