netdev - Re: [PATCH net-next v2 07/14] net: ethernet: qualcomm: Initialize PPE queue settings

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20250109175200.GP7706@kernel.org>
Date: Thu, 9 Jan 2025 17:52:00 +0000
From: Simon Horman <horms@...nel.org>
To: Luo Jie <quic_luoj@...cinc.com>
Cc: Andrew Lunn <andrew+netdev@...n.ch>,
	"David S. Miller" <davem@...emloft.net>,
	Eric Dumazet <edumazet@...gle.com>,
	Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>,
	Rob Herring <robh@...nel.org>,
	Krzysztof Kozlowski <krzk+dt@...nel.org>,
	Conor Dooley <conor+dt@...nel.org>,
	Lei Wei <quic_leiwei@...cinc.com>,
	Suruchi Agarwal <quic_suruchia@...cinc.com>,
	Pavithra R <quic_pavir@...cinc.com>,
	Jonathan Corbet <corbet@....net>, Kees Cook <kees@...nel.org>,
	"Gustavo A. R. Silva" <gustavoars@...nel.org>,
	Philipp Zabel <p.zabel@...gutronix.de>,
	linux-arm-msm@...r.kernel.org, netdev@...r.kernel.org,
	devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
	linux-doc@...r.kernel.org, linux-hardening@...r.kernel.org,
	quic_kkumarcs@...cinc.com, quic_linchen@...cinc.com,
	srinivas.kandagatla@...aro.org, bartosz.golaszewski@...aro.org,
	john@...ozen.org
Subject: Re: [PATCH net-next v2 07/14] net: ethernet: qualcomm: Initialize
 PPE queue settings

On Wed, Jan 08, 2025 at 09:47:14PM +0800, Luo Jie wrote:
> Configure unicast and multicast hardware queues for the PPE
> ports to enable packet forwarding between the ports.
> 
> Each PPE port is assigned with a range of queues. The queue ID
> selection for a packet is decided by the queue base and queue
> offset that is configured based on the internal priority and
> the RSS hash value of the packet.
> 
> Signed-off-by: Luo Jie <quic_luoj@...cinc.com>
> ---
>  drivers/net/ethernet/qualcomm/ppe/ppe_config.c | 357 ++++++++++++++++++++++++-
>  drivers/net/ethernet/qualcomm/ppe/ppe_config.h |  63 +++++
>  drivers/net/ethernet/qualcomm/ppe/ppe_regs.h   |  21 ++
>  3 files changed, 440 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/net/ethernet/qualcomm/ppe/ppe_config.c b/drivers/net/ethernet/qualcomm/ppe/ppe_config.c

...

> @@ -673,6 +701,111 @@ static struct ppe_scheduler_port_config ppe_port_sch_config[] = {
>  	},
>  };
>  
> +/* The scheduler resource is applied to each PPE port, The resource
> + * includes the unicast & multicast queues, flow nodes and DRR nodes.
> + */
> +static struct ppe_port_schedule_resource ppe_scheduler_res[] = {
> +	{	.ucastq_start	= 0,
> +		.ucastq_end	= 63,
> +		.mcastq_start	= 256,
> +		.ucastq_end	= 271,

Hi Luo Jie,

This appears to duplicate the initialisation of .ucastq_end.
Should the line above initialise .mcastq_end instead?

Likewise for other elements of this array.

Flagged by W=1 builds with both clang-19 and gcc-14.

> +		.flow_id_start	= 0,
> +		.flow_id_end	= 0,
> +		.l0node_start	= 0,
> +		.l0node_end	= 7,
> +		.l1node_start	= 0,
> +		.l1node_end	= 0,
> +	},
> +	{	.ucastq_start	= 144,
> +		.ucastq_end	= 159,
> +		.mcastq_start	= 272,
> +		.ucastq_end	= 275,
> +		.flow_id_start	= 36,
> +		.flow_id_end	= 39,
> +		.l0node_start	= 48,
> +		.l0node_end	= 63,
> +		.l1node_start	= 8,
> +		.l1node_end	= 11,
> +	},

...

> +};

...