[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20250116-marvell-88q2xxx-fix-hwmon-v1-1-ee5cfda4be87@gmail.com>
Date: Thu, 16 Jan 2025 16:37:44 +0100
From: Dimitri Fedrau <dima.fedrau@...il.com>
To: Andrew Lunn <andrew@...n.ch>, Heiner Kallweit <hkallweit1@...il.com>,
Russell King <linux@...linux.org.uk>,
"David S. Miller" <davem@...emloft.net>, Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>,
Niklas Söderlund <niklas.soderlund+renesas@...natech.se>,
Gregor Herburger <gregor.herburger@...tq-group.com>,
Stefan Eichenberger <eichest@...il.com>
Cc: netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
Dimitri Fedrau <dima.fedrau@...il.com>
Subject: [PATCH] net: phy: marvell-88q2xxx: Fix temperature measurement
with reset-gpios
When using temperature measurement on Marvell 88Q2XXX devices and the
reset-gpios property is set in DT, the device does a hardware reset when
interface is brought down and up again. That means that the content of
the register MDIO_MMD_PCS_MV_TEMP_SENSOR2 is reset to default and that
leads to permanent deactivation of the temperature measurement, because
activation is done in mv88q2xxx_probe. To fix this move activation of
temperature measurement to mv88q222x_config_init.
Signed-off-by: Dimitri Fedrau <dima.fedrau@...il.com>
---
drivers/net/phy/marvell-88q2xxx.c | 33 ++++++++++++++++++++++++++-------
1 file changed, 26 insertions(+), 7 deletions(-)
diff --git a/drivers/net/phy/marvell-88q2xxx.c b/drivers/net/phy/marvell-88q2xxx.c
index 4494b3e39ce2b672efe49d53d7021b765def6aa6..a3996471a1c9a5d4060d5d19ce44aa70e902a83f 100644
--- a/drivers/net/phy/marvell-88q2xxx.c
+++ b/drivers/net/phy/marvell-88q2xxx.c
@@ -95,6 +95,10 @@
#define MDIO_MMD_PCS_MV_TDR_OFF_CUTOFF 65246
+struct mv88q2xxx_priv {
+ bool enable_temp;
+};
+
struct mmd_val {
int devad;
u32 regnum;
@@ -710,17 +714,12 @@ static const struct hwmon_chip_info mv88q2xxx_hwmon_chip_info = {
static int mv88q2xxx_hwmon_probe(struct phy_device *phydev)
{
+ struct mv88q2xxx_priv *priv = phydev->priv;
struct device *dev = &phydev->mdio.dev;
struct device *hwmon;
char *hwmon_name;
- int ret;
-
- /* Enable temperature sense */
- ret = phy_modify_mmd(phydev, MDIO_MMD_PCS, MDIO_MMD_PCS_MV_TEMP_SENSOR2,
- MDIO_MMD_PCS_MV_TEMP_SENSOR2_DIS_MASK, 0);
- if (ret < 0)
- return ret;
+ priv->enable_temp = true;
hwmon_name = devm_hwmon_sanitize_name(dev, dev_name(dev));
if (IS_ERR(hwmon_name))
return PTR_ERR(hwmon_name);
@@ -743,6 +742,14 @@ static int mv88q2xxx_hwmon_probe(struct phy_device *phydev)
static int mv88q2xxx_probe(struct phy_device *phydev)
{
+ struct mv88q2xxx_priv *priv;
+
+ priv = devm_kzalloc(&phydev->mdio.dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ phydev->priv = priv;
+
return mv88q2xxx_hwmon_probe(phydev);
}
@@ -810,6 +817,18 @@ static int mv88q222x_revb1_revb2_config_init(struct phy_device *phydev)
static int mv88q222x_config_init(struct phy_device *phydev)
{
+ struct mv88q2xxx_priv *priv = phydev->priv;
+ int ret;
+
+ /* Enable temperature sense */
+ if (priv->enable_temp) {
+ ret = phy_modify_mmd(phydev, MDIO_MMD_PCS,
+ MDIO_MMD_PCS_MV_TEMP_SENSOR2,
+ MDIO_MMD_PCS_MV_TEMP_SENSOR2_DIS_MASK, 0);
+ if (ret < 0)
+ return ret;
+ }
+
if (phydev->c45_ids.device_ids[MDIO_MMD_PMAPMD] == PHY_ID_88Q2220_REVB0)
return mv88q222x_revb0_config_init(phydev);
else
---
base-commit: b44e27b4df1a1cd3fd84cf26c82156ed0301575f
change-id: 20250116-marvell-88q2xxx-fix-hwmon-d6700aae9227
Best regards,
--
Dimitri Fedrau <dima.fedrau@...il.com>
Powered by blists - more mailing lists