[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20250121-dts_qcs615-v3-0-fa4496950d8a@quicinc.com>
Date: Tue, 21 Jan 2025 15:54:52 +0800
From: Yijie Yang <quic_yijiyang@...cinc.com>
To: Andrew Lunn <andrew+netdev@...n.ch>,
"David S. Miller"
<davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>, Jakub Kicinski
<kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>, Rob Herring
<robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley
<conor+dt@...nel.org>, Vinod Koul <vkoul@...nel.org>,
Maxime Coquelin
<mcoquelin.stm32@...il.com>,
Alexandre Torgue <alexandre.torgue@...s.st.com>,
Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio
<konradybcio@...nel.org>,
Richard Cochran <richardcochran@...il.com>
CC: <netdev@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, <linux-arm-msm@...r.kernel.org>,
<linux-stm32@...md-mailman.stormreply.com>,
<linux-arm-kernel@...ts.infradead.org>,
Yijie Yang
<quic_yijiyang@...cinc.com>
Subject: [PATCH v3 0/4] Enable ethernet on qcs615
Correct the definition and usage of phy-mode in both the DT binding and
driver code.
Add dts nodes and EMAC driver data to enable ethernet interface on
qcs615-ride platform.
The EMAC version currently in use on this platform is the same as that in
qcs404. The EPHY model is Micrel KSZ9031.
Signed-off-by: Yijie Yang <quic_yijiyang@...cinc.com>
---
Changes in v3:
- Correct the definition of 'rgmii' in ethernet-controller.yaml.
- Remove the redundant max-speed limit in the dts file.
- Update the definition of 'rgmii' to prevent any further misunderstandings.
- Update the phy-mode in the dts file from rgmii to rgmii-id.
- Mask the PHY mode passed to the driver to allow the MAC to add the delay.
- Update the low power mode exit interrupt from 662 to 661.
- Update the compatible string to fallback to qcs404 since they share the same hardware.
- Update base commit to next-20250120.
- Link to v2: https://lore.kernel.org/r/20241118-dts_qcs615-v2-0-e62b924a3cbd@quicinc.com
---
Yijie Yang (4):
dt-bindings: net: ethernet-controller: Correct the definition of phy-mode
net: stmmac: dwmac-qcom-ethqos: Mask PHY mode if configured with rgmii-id
arm64: dts: qcom: qcs615: add ethernet node
arm64: dts: qcom: qcs615-ride: Enable ethernet node
.../bindings/net/ethernet-controller.yaml | 2 +-
arch/arm64/boot/dts/qcom/qcs615-ride.dts | 104 +++++++++++++++++++++
arch/arm64/boot/dts/qcom/qcs615.dtsi | 34 +++++++
.../ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c | 18 +++-
4 files changed, 152 insertions(+), 6 deletions(-)
---
base-commit: 9424d9acada6461344c71ac02f2f3fbcdd775498
change-id: 20241224-dts_qcs615-9612efea02cb
prerequisite-message-id: <20250120-schema_qcs615-v4-1-d9d122f89e64@...cinc.com>
prerequisite-patch-id: b97f36116c87036abe66e061db82588eb1bbaa9a
Best regards,
--
Yijie Yang <quic_yijiyang@...cinc.com>
Powered by blists - more mailing lists