[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20250124101359.2926906-2-hayashi.kunihiko@socionext.com>
Date: Fri, 24 Jan 2025 19:13:57 +0900
From: Kunihiko Hayashi <hayashi.kunihiko@...ionext.com>
To: Alexandre Torgue <alexandre.torgue@...s.st.com>,
Jose Abreu <joabreu@...opsys.com>,
Andrew Lunn <andrew+netdev@...n.ch>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>,
Maxime Coquelin <mcoquelin.stm32@...il.com>
Cc: Russell King <linux@...linux.org.uk>,
Yanteng Si <si.yanteng@...ux.dev>,
Furong Xu <0x1207@...il.com>,
Joao Pinto <Joao.Pinto@...opsys.com>,
netdev@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org,
Kunihiko Hayashi <hayashi.kunihiko@...ionext.com>
Subject: [PATCH net v3 1/3] net: stmmac: Limit the number of MTL queues to hardware capability
The number of MTL queues to use is specified by the parameter
"snps,{tx,rx}-queues-to-use" from stmmac_platform layer.
However, the maximum numbers of queues are constrained by upper limits
determined by the capability of each hardware feature. It's appropriate
to limit the values not to exceed the upper limit values and display
a warning message.
This only works if the hardware capability has the upper limit values.
Fixes: d976a525c371 ("net: stmmac: multiple queues dt configuration")
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@...ionext.com>
---
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 7bf275f127c9..be1e6fa6d557 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -7232,6 +7232,21 @@ static int stmmac_hw_init(struct stmmac_priv *priv)
if (priv->dma_cap.tsoen)
dev_info(priv->device, "TSO supported\n");
+ if (priv->dma_cap.number_rx_queues &&
+ priv->dma_cap.number_rx_queues < priv->plat->rx_queues_to_use) {
+ dev_warn(priv->device,
+ "Number of Rx queues (%u) exceeds dma capability\n",
+ priv->plat->rx_queues_to_use);
+ priv->plat->rx_queues_to_use = priv->dma_cap.number_rx_queues;
+ }
+ if (priv->dma_cap.number_tx_queues &&
+ priv->dma_cap.number_tx_queues < priv->plat->tx_queues_to_use) {
+ dev_warn(priv->device,
+ "Number of Tx queues (%u) exceeds dma capability\n",
+ priv->plat->tx_queues_to_use);
+ priv->plat->tx_queues_to_use = priv->dma_cap.number_tx_queues;
+ }
+
priv->hw->vlan_fail_q_en =
(priv->plat->flags & STMMAC_FLAG_VLAN_FAIL_Q_EN);
priv->hw->vlan_fail_q = priv->plat->vlan_fail_q;
--
2.25.1
Powered by blists - more mailing lists