netdev - [PATCH RFC net-next 15/22] net: phylink: add support for notifying PCS about EEE

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <E1tcnon-0037HW-LM@rmk-PC.armlinux.org.uk>
Date: Tue, 28 Jan 2025 15:48:01 +0000
From: "Russell King (Oracle)" <rmk+kernel@...linux.org.uk>
To: Andrew Lunn <andrew@...n.ch>,
	Heiner Kallweit <hkallweit1@...il.com>
Cc: Alexandre Torgue <alexandre.torgue@...s.st.com>,
	Andrew Lunn <andrew+netdev@...n.ch>,
	"David S. Miller" <davem@...emloft.net>,
	Eric Dumazet <edumazet@...gle.com>,
	Jakub Kicinski <kuba@...nel.org>,
	linux-arm-kernel@...ts.infradead.org,
	linux-stm32@...md-mailman.stormreply.com,
	Maxime Coquelin <mcoquelin.stm32@...il.com>,
	netdev@...r.kernel.org,
	Paolo Abeni <pabeni@...hat.com>,
	 Vladimir Oltean <olteanv@...il.com>,
	 Jiawen Wu <jiawenwu@...stnetic.com>
Subject: [PATCH RFC net-next 15/22] net: phylink: add support for notifying
 PCS about EEE

There are hooks in the stmmac driver into XPCS to control the EEE
settings when LPI is configured at the MAC. This bypasses the layering.
To allow this to be removed from the stmmac driver, add two new
methods for PCS to inform them when the LPI/EEE enablement state
changes at the MAC.

Signed-off-by: Russell King (Oracle) <rmk+kernel@...linux.org.uk>
---
 drivers/net/phy/phylink.c | 25 ++++++++++++++++++++++---
 include/linux/phylink.h   | 22 ++++++++++++++++++++++
 2 files changed, 44 insertions(+), 3 deletions(-)

diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index 214b62fba991..840af19488d8 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -1073,6 +1073,18 @@ static void phylink_pcs_link_up(struct phylink_pcs *pcs, unsigned int neg_mode,
 		pcs->ops->pcs_link_up(pcs, neg_mode, interface, speed, duplex);
 }
 
+static void phylink_pcs_disable_eee(struct phylink_pcs *pcs)
+{
+	if (pcs && pcs->ops->pcs_disable_eee)
+		pcs->ops->pcs_disable_eee(pcs);
+}
+
+static void phylink_pcs_enable_eee(struct phylink_pcs *pcs)
+{
+	if (pcs && pcs->ops->pcs_enable_eee)
+		pcs->ops->pcs_enable_eee(pcs);
+}
+
 /* Query inband for a specific interface mode, asking the MAC for the
  * PCS which will be used to handle the interface mode.
  */
@@ -1601,6 +1613,8 @@ static void phylink_deactivate_lpi(struct phylink *pl)
 		phylink_dbg(pl, "disabling LPI\n");
 
 		pl->mac_ops->mac_disable_tx_lpi(pl->config);
+
+		phylink_pcs_disable_eee(pl->pcs);
 	}
 }
 
@@ -1617,13 +1631,18 @@ static void phylink_activate_lpi(struct phylink *pl)
 	phylink_dbg(pl, "LPI timer %uus, tx clock stop %u\n",
 		    pl->mac_tx_lpi_timer, pl->mac_tx_clk_stop);
 
+	phylink_pcs_enable_eee(pl->pcs);
+
 	err = pl->mac_ops->mac_enable_tx_lpi(pl->config, pl->mac_tx_lpi_timer,
 					     pl->mac_tx_clk_stop);
-	if (!err)
-		pl->mac_enable_tx_lpi = true;
-	else
+	if (err) {
+		phylink_pcs_disable_eee(pl->pcs);
 		phylink_err(pl, "%ps() failed: %pe\n",
 			    pl->mac_ops->mac_enable_tx_lpi, ERR_PTR(err));
+		return;
+	}
+
+	pl->mac_enable_tx_lpi = true;
 }
 
 static void phylink_link_up(struct phylink *pl,
diff --git a/include/linux/phylink.h b/include/linux/phylink.h
index 898b00451bbf..a692d638568f 100644
--- a/include/linux/phylink.h
+++ b/include/linux/phylink.h
@@ -477,6 +477,10 @@ struct phylink_pcs {
  * @pcs_an_restart: restart 802.3z BaseX autonegotiation.
  * @pcs_link_up: program the PCS for the resolved link configuration
  *               (where necessary).
+ * @pcs_disable_eee: optional notification to PCS that EEE has been disabled
+ *		     at the MAC.
+ * @pcs_enable_eee: optional notification to PCS that EEE will be enabled at
+ *		    the MAC.
  * @pcs_pre_init: configure PCS components necessary for MAC hardware
  *                initialization e.g. RX clock for stmmac.
  */
@@ -500,6 +504,8 @@ struct phylink_pcs_ops {
 	void (*pcs_an_restart)(struct phylink_pcs *pcs);
 	void (*pcs_link_up)(struct phylink_pcs *pcs, unsigned int neg_mode,
 			    phy_interface_t interface, int speed, int duplex);
+	void (*pcs_disable_eee)(struct phylink_pcs *pcs);
+	void (*pcs_enable_eee)(struct phylink_pcs *pcs);
 	int (*pcs_pre_init)(struct phylink_pcs *pcs);
 };
 
@@ -625,6 +631,22 @@ void pcs_an_restart(struct phylink_pcs *pcs);
 void pcs_link_up(struct phylink_pcs *pcs, unsigned int neg_mode,
 		 phy_interface_t interface, int speed, int duplex);
 
+/**
+ * pcs_disable_eee() - Disable EEE at the PCS
+ * @pcs: a pointer to a &struct phylink_pcs
+ *
+ * Optional method informing the PCS that EEE has been disabled at the MAC.
+ */
+void pcs_disable_eee(struct phylink_pcs *pcs);
+
+/**
+ * pcs_enable_eee() - Enable EEE at the PCS
+ * @pcs: a pointer to a &struct phylink_pcs
+ *
+ * Optional method informing the PCS that EEE is about to be enabled at the MAC.
+ */
+void pcs_enable_eee(struct phylink_pcs *pcs);
+
 /**
  * pcs_pre_init() - Configure PCS components necessary for MAC initialization
  * @pcs: a pointer to a &struct phylink_pcs.
-- 
2.30.2