netdev - [PATCH 05/13] gpio: max3191x: use gpiods_set_array_value

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20250131-gpio-set-array-helper-v1-5-991c8ccb4d6e@baylibre.com>
Date: Fri, 31 Jan 2025 14:24:45 -0600
From: David Lechner <dlechner@...libre.com>
To: Linus Walleij <linus.walleij@...aro.org>, 
 Bartosz Golaszewski <brgl@...ev.pl>, Andy Shevchenko <andy@...nel.org>, 
 Geert Uytterhoeven <geert@...ux-m68k.org>, 
 Lars-Peter Clausen <lars@...afoo.de>, 
 Michael Hennerich <Michael.Hennerich@...log.com>, 
 Jonathan Cameron <jic23@...nel.org>, Ulf Hansson <ulf.hansson@...aro.org>, 
 Peter Rosin <peda@...ntia.se>, Andrew Lunn <andrew@...n.ch>, 
 Heiner Kallweit <hkallweit1@...il.com>, 
 Russell King <linux@...linux.org.uk>, 
 "David S. Miller" <davem@...emloft.net>, Eric Dumazet <edumazet@...gle.com>, 
 Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>, 
 Vinod Koul <vkoul@...nel.org>, Kishon Vijay Abraham I <kishon@...nel.org>, 
 Nuno Sá <nuno.sa@...log.com>, 
 Liam Girdwood <lgirdwood@...il.com>, Mark Brown <broonie@...nel.org>, 
 Jaroslav Kysela <perex@...ex.cz>, Takashi Iwai <tiwai@...e.com>
Cc: linux-gpio@...r.kernel.org, linux-kernel@...r.kernel.org, 
 linux-iio@...r.kernel.org, linux-mmc@...r.kernel.org, 
 netdev@...r.kernel.org, linux-phy@...ts.infradead.org, 
 linux-sound@...r.kernel.org, David Lechner <dlechner@...libre.com>
Subject: [PATCH 05/13] gpio: max3191x: use gpiods_set_array_value_cansleep

Reduce verbosity by using gpiods_set_array_value_cansleep() instead of
gpiods_set_array_value_cansleep().

Signed-off-by: David Lechner <dlechner@...libre.com>
---
 drivers/gpio/gpio-max3191x.c | 18 +++++++-----------
 1 file changed, 7 insertions(+), 11 deletions(-)

diff --git a/drivers/gpio/gpio-max3191x.c b/drivers/gpio/gpio-max3191x.c
index bbacc714632b70e672a3d8494636fbc40dfea8ec..fee8dd2bd3c9eb7c06817430634eaf905cc9cbd8 100644
--- a/drivers/gpio/gpio-max3191x.c
+++ b/drivers/gpio/gpio-max3191x.c
@@ -309,23 +309,21 @@ static int max3191x_set_config(struct gpio_chip *gpio, unsigned int offset,
 	return 0;
 }

-static void gpiod_set_array_single_value_cansleep(unsigned int ndescs,
-						  struct gpio_desc **desc,
-						  struct gpio_array *info,
+static void gpiod_set_array_single_value_cansleep(struct gpio_descs *descs,
 						  int value)
 {
 	unsigned long *values;

-	values = bitmap_alloc(ndescs, GFP_KERNEL);
+	values = bitmap_alloc(descs->ndescs, GFP_KERNEL);
 	if (!values)
 		return;

 	if (value)
-		bitmap_fill(values, ndescs);
+		bitmap_fill(values, descs->ndescs);
 	else
-		bitmap_zero(values, ndescs);
+		bitmap_zero(values, descs->ndescs);

-	gpiod_set_array_value_cansleep(ndescs, desc, info, values);
+	gpiods_set_array_value_cansleep(descs, values);
 	bitmap_free(values);
 }

@@ -396,10 +394,8 @@ static int max3191x_probe(struct spi_device *spi)
 	max3191x->mode = device_property_read_bool(dev, "maxim,modesel-8bit")
 				 ? STATUS_BYTE_DISABLED : STATUS_BYTE_ENABLED;
 	if (max3191x->modesel_pins)
-		gpiod_set_array_single_value_cansleep(
-				 max3191x->modesel_pins->ndescs,
-				 max3191x->modesel_pins->desc,
-				 max3191x->modesel_pins->info, max3191x->mode);
+		gpiod_set_array_single_value_cansleep(max3191x->modesel_pins,
+						      max3191x->mode);

 	max3191x->ignore_uv = device_property_read_bool(dev,
 						  "maxim,ignore-undervoltage");

-- 
2.43.0