netdev - Re: [PATCH v3 0/4] Add support for Priva E-Measuringbox board

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-Id: <173859694746.2601652.11244969424431209545.robh@kernel.org>
Date: Mon, 03 Feb 2025 09:37:06 -0600
From: "Rob Herring (Arm)" <robh@...nel.org>
To: Oleksij Rempel <o.rempel@...gutronix.de>
Cc: linux-kernel@...r.kernel.org, Jakub Kicinski <kuba@...nel.org>, 
 Maxime Coquelin <mcoquelin.stm32@...il.com>, 
 Woojung Huh <woojung.huh@...rochip.com>, Paolo Abeni <pabeni@...hat.com>, 
 Andrew Lunn <andrew+netdev@...n.ch>, devicetree@...r.kernel.org, 
 Eric Dumazet <edumazet@...gle.com>, 
 linux-stm32@...md-mailman.stormreply.com, 
 Krzysztof Kozlowski <krzk+dt@...nel.org>, 
 Conor Dooley <conor+dt@...nel.org>, "David S. Miller" <davem@...emloft.net>, 
 netdev@...r.kernel.org, Alexandre Torgue <alexandre.torgue@...s.st.com>, 
 kernel@...gutronix.de
Subject: Re: [PATCH v3 0/4] Add support for Priva E-Measuringbox board

On Mon, 03 Feb 2025 09:58:16 +0100, Oleksij Rempel wrote:
> This patch series introduces support for the Priva E-Measuringbox board
> based on the ST STM32MP133 SoC. The set includes all the necessary
> changes for device tree bindings, vendor prefixes, thermal support, and
> board-specific devicetree to pass devicetree validation and checkpatch
> tests.
> 
> changes v2:
> - drop: dt-bindings: net: Add TI DP83TD510 10BaseT1L PHY
> 
> Oleksij Rempel (2):
>   dt-bindings: vendor-prefixes: Add prefix for Priva
>   dt-bindings: arm: stm32: Add Priva E-Measuringbox board
> 
> Roan van Dijk (2):
>   arm: dts: stm32: Add thermal support for STM32MP131
>   arm: dts: stm32: Add Priva E-Measuringbox devicetree
> 
>  .../devicetree/bindings/arm/stm32/stm32.yaml  |   6 +
>  .../devicetree/bindings/vendor-prefixes.yaml  |   2 +
>  arch/arm/boot/dts/st/Makefile                 |   1 +
>  arch/arm/boot/dts/st/stm32mp131.dtsi          |  35 ++
>  arch/arm/boot/dts/st/stm32mp133c-prihmb.dts   | 496 ++++++++++++++++++
>  5 files changed, 540 insertions(+)
>  create mode 100644 arch/arm/boot/dts/st/stm32mp133c-prihmb.dts
> 
> --
> 2.39.5
> 
> 
> 

My bot found new DTB warnings on the .dts files added or changed in this
series.

Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings
are fixed by another series. Ultimately, it is up to the platform
maintainer whether these warnings are acceptable or not. No need to reply
unless the platform maintainer has comments.

If you already ran DT checks and didn't see these error(s), then
make sure dt-schema is up to date:

  pip3 install dtschema --upgrade

New warnings running 'make CHECK_DTBS=y for arch/arm/boot/dts/st/' for 20250203085820.609176-1-o.rempel@...gutronix.de:

arch/arm/boot/dts/st/stm32mp133c-prihmb.dtb: adc@...04000: adc@0:interrupts: 0 was expected
	from schema $id: http://devicetree.org/schemas/iio/adc/st,stm32-adc.yaml#
arch/arm/boot/dts/st/stm32mp133c-prihmb.dtb: adc@...03000: adc@0:interrupts: 0 was expected
	from schema $id: http://devicetree.org/schemas/iio/adc/st,stm32-adc.yaml#