lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-Id: <E1tffRT-003Z5u-CY@rmk-PC.armlinux.org.uk>
Date: Wed, 05 Feb 2025 13:27:47 +0000
From: "Russell King (Oracle)" <rmk+kernel@...linux.org.uk>
To: Tristram.Ha@...rochip.com
Cc: Vladimir Oltean <olteanv@...il.com>,
	 UNGLinuxDriver@...rochip.com,
	 Woojung Huh <woojung.huh@...rochip.com>,
	Andrew Lunn <andrew@...n.ch>,
	Heiner Kallweit <hkallweit1@...il.com>,
	"David S. Miller" <davem@...emloft.net>,
	Eric Dumazet <edumazet@...gle.com>,
	Jakub Kicinski <kuba@...nel.org>,
	Paolo Abeni <pabeni@...hat.com>,
	netdev@...r.kernel.org
Subject: [PATCH RFC net-next 4/4] net: xpcs: allow 1000BASE-X to work with
 older XPCS IP

Older XPCS IP requires SGMII_LINK and PHY_SIDE_SGMII to be set when
operating in 1000BASE-X mode even though the XPCS is not configured for
SGMII. An example of a device with older XPCS IP is KSZ9477.

We already don't clear these bits if we switch from SGMII to 1000BASE-X
on TXGBE - which would result in 1000BASE-X with the PHY_SIDE_SGMII bit
left set.

It is currently believed to be safe to set both bits on newer IP
without side-effects.

Signed-off-by: Russell King (Oracle) <rmk+kernel@...linux.org.uk>
---
 drivers/net/pcs/pcs-xpcs.c | 13 +++++++++++--
 drivers/net/pcs/pcs-xpcs.h |  1 +
 2 files changed, 12 insertions(+), 2 deletions(-)

diff --git a/drivers/net/pcs/pcs-xpcs.c b/drivers/net/pcs/pcs-xpcs.c
index 1eba0c583f16..d522e4a5a138 100644
--- a/drivers/net/pcs/pcs-xpcs.c
+++ b/drivers/net/pcs/pcs-xpcs.c
@@ -774,9 +774,18 @@ static int xpcs_config_aneg_c37_1000basex(struct dw_xpcs *xpcs,
 			return ret;
 	}
 
-	mask = DW_VR_MII_PCS_MODE_MASK;
+	/* Older XPCS IP requires PHY_MODE (bit 3) and SGMII_LINK (but 4) to
+	 * be set when operating in 1000BASE-X mode. See page 233
+	 * https://ww1.microchip.com/downloads/aemDocuments/documents/OTH/ProductDocuments/DataSheets/KSZ9477S-Data-Sheet-DS00002392C.pdf
+	 * "5.5.9 SGMII AUTO-NEGOTIATION CONTROL REGISTER"
+	 */
+	mask = DW_VR_MII_PCS_MODE_MASK | DW_VR_MII_AN_CTRL_SGMII_LINK |
+	       DW_VR_MII_TX_CONFIG_MASK;
 	val = FIELD_PREP(DW_VR_MII_PCS_MODE_MASK,
-			 DW_VR_MII_PCS_MODE_C37_1000BASEX);
+			 DW_VR_MII_PCS_MODE_C37_1000BASEX) |
+	      FIELD_PREP(DW_VR_MII_TX_CONFIG_MASK,
+			 DW_VR_MII_TX_CONFIG_PHY_SIDE_SGMII) |
+	      DW_VR_MII_AN_CTRL_SGMII_LINK;
 
 	if (!xpcs->pcs.poll) {
 		mask |= DW_VR_MII_AN_INTR_EN;
diff --git a/drivers/net/pcs/pcs-xpcs.h b/drivers/net/pcs/pcs-xpcs.h
index 96117bd9e2b6..f0ddd93c7a22 100644
--- a/drivers/net/pcs/pcs-xpcs.h
+++ b/drivers/net/pcs/pcs-xpcs.h
@@ -73,6 +73,7 @@
 
 /* VR_MII_AN_CTRL */
 #define DW_VR_MII_AN_CTRL_8BIT			BIT(8)
+#define DW_VR_MII_AN_CTRL_SGMII_LINK		BIT(4)
 #define DW_VR_MII_TX_CONFIG_MASK		BIT(3)
 #define DW_VR_MII_TX_CONFIG_PHY_SIDE_SGMII	0x1
 #define DW_VR_MII_TX_CONFIG_MAC_SIDE_SGMII	0x0
-- 
2.30.2


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ