netdev - [PATCH net-next 13/14] net: stmmac: use stmmac_set_lpi

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <E1tffe2-003ZIg-Mx@rmk-PC.armlinux.org.uk>
Date: Wed, 05 Feb 2025 13:40:46 +0000
From: "Russell King (Oracle)" <rmk+kernel@...linux.org.uk>
To: Andrew Lunn <andrew@...n.ch>,
	Heiner Kallweit <hkallweit1@...il.com>
Cc: Andrew Lunn <andrew+netdev@...n.ch>,
	"David S. Miller" <davem@...emloft.net>,
	Eric Dumazet <edumazet@...gle.com>,
	Jakub Kicinski <kuba@...nel.org>,
	Paolo Abeni <pabeni@...hat.com>,
	Maxime Coquelin <mcoquelin.stm32@...il.com>,
	Alexandre Torgue <alexandre.torgue@...s.st.com>,
	netdev@...r.kernel.org,
	linux-stm32@...md-mailman.stormreply.com,
	linux-arm-kernel@...ts.infradead.org
Subject: [PATCH net-next 13/14] net: stmmac: use stmmac_set_lpi_mode()

Use the new stmmac_set_lpi_mode() API to configure the parameters of
the desired LPI mode rather than the older methods.

Signed-off-by: Russell King (Oracle) <rmk+kernel@...linux.org.uk>
---
 .../net/ethernet/stmicro/stmmac/stmmac_main.c | 29 ++++++++++---------
 1 file changed, 15 insertions(+), 14 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 921c4badd5fb..a2ea883b50ab 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -390,11 +390,6 @@ static inline u32 stmmac_rx_dirty(struct stmmac_priv *priv, u32 queue)
 	return dirty;
 }
 
-static void stmmac_enable_hw_lpi_timer(struct stmmac_priv *priv)
-{
-	stmmac_set_eee_lpi_timer(priv, priv->hw, priv->tx_lpi_timer);
-}
-
 static bool stmmac_eee_tx_busy(struct stmmac_priv *priv)
 {
 	u32 tx_cnt = priv->plat->tx_queues_to_use;
@@ -431,8 +426,9 @@ static void stmmac_try_to_start_sw_lpi(struct stmmac_priv *priv)
 
 	/* Check and enter in LPI mode */
 	if (!priv->tx_path_in_lpi_mode)
-		stmmac_set_eee_mode(priv, priv->hw,
-			priv->plat->flags & STMMAC_FLAG_EN_TX_LPI_CLOCKGATING);
+		stmmac_set_lpi_mode(priv, priv->hw, STMMAC_LPI_FORCED,
+			priv->plat->flags & STMMAC_FLAG_EN_TX_LPI_CLOCKGATING,
+			0);
 }
 
 /**
@@ -443,7 +439,7 @@ static void stmmac_try_to_start_sw_lpi(struct stmmac_priv *priv)
 static void stmmac_stop_sw_lpi(struct stmmac_priv *priv)
 {
 	del_timer_sync(&priv->eee_ctrl_timer);
-	stmmac_reset_eee_mode(priv, priv->hw);
+	stmmac_set_lpi_mode(priv, priv->hw, STMMAC_LPI_DISABLE, false, 0);
 	priv->tx_path_in_lpi_mode = false;
 }
 
@@ -1046,7 +1042,7 @@ static void stmmac_mac_disable_tx_lpi(struct phylink_config *config)
 	netdev_dbg(priv->dev, "disable EEE\n");
 	priv->eee_sw_timer_en = false;
 	del_timer_sync(&priv->eee_ctrl_timer);
-	stmmac_reset_eee_mode(priv, priv->hw);
+	stmmac_set_lpi_mode(priv, priv->hw, STMMAC_LPI_DISABLE, false, 0);
 	priv->tx_path_in_lpi_mode = false;
 
 	stmmac_set_eee_timer(priv, priv->hw, 0, STMMAC_DEFAULT_TWT_LS);
@@ -1061,6 +1057,7 @@ static int stmmac_mac_enable_tx_lpi(struct phylink_config *config, u32 timer,
 				    bool tx_clk_stop)
 {
 	struct stmmac_priv *priv = netdev_priv(to_net_dev(config->dev));
+	int ret;
 
 	priv->tx_lpi_timer = timer;
 	priv->eee_active = true;
@@ -1075,11 +1072,15 @@ static int stmmac_mac_enable_tx_lpi(struct phylink_config *config, u32 timer,
 		xpcs_config_eee(priv->hw->xpcs, priv->plat->mult_fact_100ns,
 				true);
 
-	if (priv->plat->has_gmac4 && priv->tx_lpi_timer <= STMMAC_ET_MAX) {
-		/* Use hardware LPI mode */
-		stmmac_enable_hw_lpi_timer(priv);
-	} else {
-		/* Use software LPI mode */
+	/* Try to cnfigure the hardware timer. */
+	ret = stmmac_set_lpi_mode(priv, priv->hw, STMMAC_LPI_TIMER,
+				  priv->plat->flags & STMMAC_FLAG_EN_TX_LPI_CLOCKGATING,
+				  priv->tx_lpi_timer);
+
+	if (ret) {
+		/* Hardware timer mode not supported, or value out of range.
+		 * Fall back to using software LPI mode
+		 */
 		priv->eee_sw_timer_en = true;
 		stmmac_restart_sw_lpi_timer(priv);
 	}
-- 
2.30.2