[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <E1tgO70-003ilF-1x@rmk-PC.armlinux.org.uk>
Date: Fri, 07 Feb 2025 13:09:38 +0000
From: "Russell King (Oracle)" <rmk+kernel@...linux.org.uk>
To: Andrew Lunn <andrew@...n.ch>,
Heiner Kallweit <hkallweit1@...il.com>
Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@...labora.com>,
"Chester A. Unal" <chester.a.unal@...nc9.com>,
Daniel Golle <daniel@...rotopia.org>,
"David S. Miller" <davem@...emloft.net>,
DENG Qingfang <dqfext@...il.com>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
linux-arm-kernel@...ts.infradead.org,
linux-mediatek@...ts.infradead.org,
Matthias Brugger <matthias.bgg@...il.com>,
netdev@...r.kernel.org,
Paolo Abeni <pabeni@...hat.com>,
Sean Wang <sean.wang@...iatek.com>,
Simon Horman <horms@...nel.org>,
Vladimir Oltean <olteanv@...il.com>
Subject: [PATCH net-next v2 2/3] net: dsa: allow use of phylink managed EEE
support
In order to allow DSA drivers to use phylink managed EEE, changes are
necessary to the DSA .set_eee() and .get_eee() methods. Where drivers
make use of phylink managed EEE, these should just pass the method on
to their phylink implementation without calling the DSA specific
operations.
Signed-off-by: Russell King (Oracle) <rmk+kernel@...linux.org.uk>
---
net/dsa/user.c | 21 +++++++++++++--------
1 file changed, 13 insertions(+), 8 deletions(-)
diff --git a/net/dsa/user.c b/net/dsa/user.c
index 291ab1b4acc4..2e0a51c1b750 100644
--- a/net/dsa/user.c
+++ b/net/dsa/user.c
@@ -1243,16 +1243,21 @@ static int dsa_user_set_eee(struct net_device *dev, struct ethtool_keee *e)
if (!ds->ops->support_eee || !ds->ops->support_eee(ds, dp->index))
return -EOPNOTSUPP;
- /* Port's PHY and MAC both need to be EEE capable */
- if (!dev->phydev)
- return -ENODEV;
+ /* If the port is using phylink managed EEE, then get_mac_eee is
+ * unnecessary.
+ */
+ if (!phylink_mac_implements_lpi(ds->phylink_mac_ops)) {
+ /* Port's PHY and MAC both need to be EEE capable */
+ if (!dev->phydev)
+ return -ENODEV;
- if (!ds->ops->set_mac_eee)
- return -EOPNOTSUPP;
+ if (!ds->ops->set_mac_eee)
+ return -EOPNOTSUPP;
- ret = ds->ops->set_mac_eee(ds, dp->index, e);
- if (ret)
- return ret;
+ ret = ds->ops->set_mac_eee(ds, dp->index, e);
+ if (ret)
+ return ret;
+ }
return phylink_ethtool_set_eee(dp->pl, e);
}
--
2.30.2
Powered by blists - more mailing lists