lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <heg3exbrmo4zt64cdeolououo25lj2idusepuyuu7iggxgn5fe@6bky6h5pe3tu>
Date: Fri, 7 Feb 2025 17:42:11 +0100
From: Thierry Reding <thierry.reding@...il.com>
To: Jon Hunter <jonathanh@...dia.com>
Cc: Furong Xu <0x1207@...il.com>, netdev@...r.kernel.org, 
	linux-stm32@...md-mailman.stormreply.com, linux-arm-kernel@...ts.infradead.org, 
	linux-kernel@...r.kernel.org, Andrew Lunn <andrew+netdev@...n.ch>, 
	"David S. Miller" <davem@...emloft.net>, Eric Dumazet <edumazet@...gle.com>, 
	Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>, 
	Maxime Coquelin <mcoquelin.stm32@...il.com>, Alexandre Torgue <alexandre.torgue@...s.st.com>, xfr@...look.com, 
	Brad Griffis <bgriffis@...dia.com>, Ido Schimmel <idosch@...sch.org>, 
	"linux-tegra@...r.kernel.org" <linux-tegra@...r.kernel.org>
Subject: Re: [PATCH net v1] net: stmmac: Apply new page pool parameters when
 SPH is enabled

On Fri, Feb 07, 2025 at 01:41:49PM +0000, Jon Hunter wrote:
> Hi Furong,
> 
> On 07/02/2025 08:56, Furong Xu wrote:
> > Commit df542f669307 ("net: stmmac: Switch to zero-copy in
> > non-XDP RX path") makes DMA write received frame into buffer at offset
> > of NET_SKB_PAD and sets page pool parameters to sync from offset of
> > NET_SKB_PAD. But when Header Payload Split is enabled, the header is
> > written at offset of NET_SKB_PAD, while the payload is written at
> > offset of zero. Uncorrect offset parameter for the payload breaks dma
> > coherence [1] since both CPU and DMA touch the page buffer from offset
> > of zero which is not handled by the page pool sync parameter.
> > 
> > And in case the DMA cannot split the received frame, for example,
> > a large L2 frame, pp_params.max_len should grow to match the tail
> > of entire frame.
> > 
> > [1] https://lore.kernel.org/netdev/d465f277-bac7-439f-be1d-9a47dfe2d951@nvidia.com/
> > 
> > Reported-by: Jon Hunter <jonathanh@...dia.com>
> > Reported-by: Brad Griffis <bgriffis@...dia.com>
> > Suggested-by: Ido Schimmel <idosch@...sch.org>
> > Fixes: df542f669307 ("net: stmmac: Switch to zero-copy in non-XDP RX path")
> > Signed-off-by: Furong Xu <0x1207@...il.com>
> > ---
> >   drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 5 +++++
> >   1 file changed, 5 insertions(+)
> > 
> > diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> > index b34ebb916b89..c0ae7db96f46 100644
> > --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> > +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> > @@ -2094,6 +2094,11 @@ static int __alloc_dma_rx_desc_resources(struct stmmac_priv *priv,
> >   	pp_params.offset = stmmac_rx_offset(priv);
> >   	pp_params.max_len = dma_conf->dma_buf_sz;
> > +	if (priv->sph) {
> > +		pp_params.offset = 0;
> > +		pp_params.max_len += stmmac_rx_offset(priv);
> > +	}
> > +
> >   	rx_q->page_pool = page_pool_create(&pp_params);
> >   	if (IS_ERR(rx_q->page_pool)) {
> >   		ret = PTR_ERR(rx_q->page_pool);
> 
> 
> Thanks for sending this. I can confirm that it fixes the issue we are seeing
> and so ...
> 
> Tested-by: Jon Hunter <jonathanh@...dia.com>

Yes, I can confirm as well. I've tested based on the discussion in the
earlier thread and had the equivalent of this patch (modulo the ->sph
check, but that's always true on this system), so:

Tested-by: Thierry Reding <treding@...dia.com>

Download attachment "signature.asc" of type "application/pgp-signature" (834 bytes)

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ