[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <842c3542-95a6-4112-9c50-70226b0caadc@huawei.com>
Date: Fri, 14 Feb 2025 10:46:31 +0800
From: Jijie Shao <shaojijie@...wei.com>
To: Andrew Lunn <andrew@...n.ch>
CC: <shaojijie@...wei.com>, <davem@...emloft.net>, <edumazet@...gle.com>,
<kuba@...nel.org>, <pabeni@...hat.com>, <andrew+netdev@...n.ch>,
<horms@...nel.org>, <shenjian15@...wei.com>, <wangpeiyang1@...wei.com>,
<liuyonglong@...wei.com>, <chenhao418@...wei.com>, <sudongming1@...wei.com>,
<xujunsheng@...wei.com>, <shiyongbang@...wei.com>, <libaihan@...wei.com>,
<jonathan.cameron@...wei.com>, <shameerali.kolothum.thodi@...wei.com>,
<salil.mehta@...wei.com>, <netdev@...r.kernel.org>,
<linux-kernel@...r.kernel.org>
Subject: Re: [PATCH net-next 2/7] net: hibmcge: Add self test supported in
this module
on 2025/2/14 3:59, Andrew Lunn wrote:
> On Thu, Feb 13, 2025 at 11:55:24AM +0800, Jijie Shao wrote:
>> This patch supports many self test: Mac, SerDes and Phy.
>>
>> To implement self test, this patch implements a simple packet sending and
>> receiving function in the driver. By sending a packet in a specific format,
>> driver considers that the test is successful if the packet is received.
>> Otherwise, the test fails.
>>
>> The SerDes hardware is on the BMC side, Therefore, when the SerDes loopback
>> need enabled, driver notifies the BMC through an event message.
>>
>> Signed-off-by: Jijie Shao <shaojijie@...wei.com>
> Please take a look at the work Gerhard Engleder is doing, and try not
> to reinvent net/core/selftest.c
>
> Andrew
I actually knew about this, but after browsing the source code, I gave up using it.
I have an additional requirement: serdes loopback and mac loopback.
However, they are not supported in net/core/selftest.c.
Thanks,
Jijie Shao
Powered by blists - more mailing lists