| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20250217-igc_mqprio_tx_mode-v1-1-3a402fe1f326@linutronix.de>
Date: Mon, 17 Feb 2025 12:45:57 +0100
From: Kurt Kanzenbach <kurt@...utronix.de>
To: Tony Nguyen <anthony.l.nguyen@...el.com>,
Przemek Kitszel <przemyslaw.kitszel@...el.com>,
Faizal Rahim <faizal.abdul.rahim@...ux.intel.com>
Cc: Andrew Lunn <andrew+netdev@...n.ch>,
"David S. Miller" <davem@...emloft.net>, Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>,
Sebastian Andrzej Siewior <bigeasy@...utronix.de>,
intel-wired-lan@...ts.osuosl.org, netdev@...r.kernel.org,
Kurt Kanzenbach <kurt@...utronix.de>
Subject: [PATCH iwl-next] igc: Change Tx mode for MQPRIO offloading
The current MQPRIO offload implementation uses the legacy TSN Tx mode. In
this mode the hardware uses four packet buffers and considers queue
priorities.
In order to harmonize the TAPRIO implementation with MQPRIO switch to the
regular TSN Tx mode. In addition to the legacy mode, transmission is always
coupled to Qbv. The driver already has mechanisms to use a dummy schedule
of 1 second with all gates open for ETF. Simply use this for MQPRIO too.
This reduces code and makes it easier to add support for frame preemption
later.
While at it limit the netdev_tc calls to MQPRIO only.
Tested on i225 with real time application using high priority queue, iperf3
using low priority queue and network TAP device.
Signed-off-by: Kurt Kanzenbach <kurt@...utronix.de>
---
drivers/net/ethernet/intel/igc/igc.h | 4 +---
drivers/net/ethernet/intel/igc/igc_main.c | 18 ++++++++++++++++-
drivers/net/ethernet/intel/igc/igc_tsn.c | 33 +------------------------------
3 files changed, 19 insertions(+), 36 deletions(-)
diff --git a/drivers/net/ethernet/intel/igc/igc.h b/drivers/net/ethernet/intel/igc/igc.h
index b8111ad9a9a83dbe1257d8011e046cbd263022c3..95f503f7a41f42358302d4726ef82032278fbd29 100644
--- a/drivers/net/ethernet/intel/igc/igc.h
+++ b/drivers/net/ethernet/intel/igc/igc.h
@@ -388,11 +388,9 @@ extern char igc_driver_name[];
#define IGC_FLAG_RX_LEGACY BIT(16)
#define IGC_FLAG_TSN_QBV_ENABLED BIT(17)
#define IGC_FLAG_TSN_QAV_ENABLED BIT(18)
-#define IGC_FLAG_TSN_LEGACY_ENABLED BIT(19)
#define IGC_FLAG_TSN_ANY_ENABLED \
- (IGC_FLAG_TSN_QBV_ENABLED | IGC_FLAG_TSN_QAV_ENABLED | \
- IGC_FLAG_TSN_LEGACY_ENABLED)
+ (IGC_FLAG_TSN_QBV_ENABLED | IGC_FLAG_TSN_QAV_ENABLED)
#define IGC_FLAG_RSS_FIELD_IPV4_UDP BIT(6)
#define IGC_FLAG_RSS_FIELD_IPV6_UDP BIT(7)
diff --git a/drivers/net/ethernet/intel/igc/igc_main.c b/drivers/net/ethernet/intel/igc/igc_main.c
index 84307bb7313e0fcb7d598e67586f1ea076c1d942..7a37a54c5aa9f36505a98a42959ba8276469ce36 100644
--- a/drivers/net/ethernet/intel/igc/igc_main.c
+++ b/drivers/net/ethernet/intel/igc/igc_main.c
@@ -6603,13 +6603,14 @@ static int igc_tsn_enable_mqprio(struct igc_adapter *adapter,
struct tc_mqprio_qopt_offload *mqprio)
{
struct igc_hw *hw = &adapter->hw;
- int i;
+ int err, i;
if (hw->mac.type != igc_i225)
return -EOPNOTSUPP;
if (!mqprio->qopt.num_tc) {
adapter->strict_priority_enable = false;
+ netdev_reset_tc(adapter->netdev);
goto apply;
}
@@ -6640,6 +6641,21 @@ static int igc_tsn_enable_mqprio(struct igc_adapter *adapter,
igc_save_mqprio_params(adapter, mqprio->qopt.num_tc,
mqprio->qopt.offset);
+ err = netdev_set_num_tc(adapter->netdev, adapter->num_tc);
+ if (err)
+ return err;
+
+ for (i = 0; i < adapter->num_tc; i++) {
+ err = netdev_set_tc_queue(adapter->netdev, i, 1,
+ adapter->queue_per_tc[i]);
+ if (err)
+ return err;
+ }
+
+ /* In case the card is configured with less than four queues. */
+ for (; i < IGC_MAX_TX_QUEUES; i++)
+ adapter->queue_per_tc[i] = i;
+
mqprio->qopt.hw = TC_MQPRIO_HW_OFFLOAD_TCS;
apply:
diff --git a/drivers/net/ethernet/intel/igc/igc_tsn.c b/drivers/net/ethernet/intel/igc/igc_tsn.c
index 1e44374ca1ffbb86e9893266c590f318984ef574..6e4582de9602db2c6667f1736cc2acaa4d4b5201 100644
--- a/drivers/net/ethernet/intel/igc/igc_tsn.c
+++ b/drivers/net/ethernet/intel/igc/igc_tsn.c
@@ -47,7 +47,7 @@ static unsigned int igc_tsn_new_flags(struct igc_adapter *adapter)
new_flags |= IGC_FLAG_TSN_QAV_ENABLED;
if (adapter->strict_priority_enable)
- new_flags |= IGC_FLAG_TSN_LEGACY_ENABLED;
+ new_flags |= IGC_FLAG_TSN_QBV_ENABLED;
return new_flags;
}
@@ -157,16 +157,12 @@ static int igc_tsn_disable_offload(struct igc_adapter *adapter)
wr32(IGC_QBVCYCLET_S, 0);
wr32(IGC_QBVCYCLET, NSEC_PER_SEC);
- /* Reset mqprio TC configuration. */
- netdev_reset_tc(adapter->netdev);
-
/* Restore the default Tx arbitration: Priority 0 has the highest
* priority and is assigned to queue 0 and so on and so forth.
*/
igc_tsn_tx_arb(adapter, queue_per_tc);
adapter->flags &= ~IGC_FLAG_TSN_QBV_ENABLED;
- adapter->flags &= ~IGC_FLAG_TSN_LEGACY_ENABLED;
return 0;
}
@@ -206,37 +202,10 @@ static int igc_tsn_enable_offload(struct igc_adapter *adapter)
igc_tsn_set_retx_qbvfullthreshold(adapter);
if (adapter->strict_priority_enable) {
- int err;
-
- err = netdev_set_num_tc(adapter->netdev, adapter->num_tc);
- if (err)
- return err;
-
- for (i = 0; i < adapter->num_tc; i++) {
- err = netdev_set_tc_queue(adapter->netdev, i, 1,
- adapter->queue_per_tc[i]);
- if (err)
- return err;
- }
-
- /* In case the card is configured with less than four queues. */
- for (; i < IGC_MAX_TX_QUEUES; i++)
- adapter->queue_per_tc[i] = i;
-
/* Configure queue priorities according to the user provided
* mapping.
*/
igc_tsn_tx_arb(adapter, adapter->queue_per_tc);
-
- /* Enable legacy TSN mode which will do strict priority without
- * any other TSN features.
- */
- tqavctrl = rd32(IGC_TQAVCTRL);
- tqavctrl |= IGC_TQAVCTRL_TRANSMIT_MODE_TSN;
- tqavctrl &= ~IGC_TQAVCTRL_ENHANCED_QAV;
- wr32(IGC_TQAVCTRL, tqavctrl);
-
- return 0;
}
for (i = 0; i < adapter->num_tx_queues; i++) {
---
base-commit: 0784d83df3bfc977c13252a0599be924f0afa68d
change-id: 20250214-igc_mqprio_tx_mode-22c19c564605
Best regards,
--
Kurt Kanzenbach <kurt@...utronix.de>
Powered by blists - more mailing lists